Changes

#Enter port that will be used, in this example 502 will be used

#Enter port that will be used, in this example 502 will be used

#Enter device ID

#Enter device ID

#Press '''Save & Apply'''

#Press [[File:Save & Apply.png|90px]]

[[File:Networking MQTT MODBUS flespi configuration.png|border|class=tlt-border|1007x1007px]]

[[File:Networking MQTT MODBUS flespi configuration.png|border|class=tlt-border|1007x1007px]]

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v3.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v4.png|border|class=tlt-border|1100px]]

[[File:MQTT gateway modbus client configuration v4.png|border|class=tlt-border|1100px]]

#<li value="11">Press [[File:Save & Apply.png|90px]] to save configuration

#<li value="11">Press [[File:Save & Apply.png|90px]] to save the configuration

''List of available Modbus parameters can be found [https://wiki.teltonika-networks.com/view/{{{name}}}_Monitoring_via_Modbus#Get_Parameters here]''

''List of available Modbus parameters can be found [https://wiki.teltonika-networks.com/view/{{{name}}}_Monitoring_via_Modbus#Get_Parameters here]''