Changes

*Access mesh gateway's WebUI.

*Access mesh gateway's WebUI.

*Navigate to '''Network''' → '''Wireless'''. The mesh interface, in this case "1", shows the number of connected mesh nodes, which is 2 and indicates the cpnfigures RUTX11 and RUT956.

*Navigate to '''Network''' → '''Wireless'''. The mesh interface, in this case "1", shows the number of connected mesh nodes, which is 2 and indicates the cpnfigures RUTX11 and RUT956.

[[File:Wireless Mesh Test1.png|border|1000x480px|center|class=tlt-border]]  

[[File:Wireless Mesh Test 1.png|border|1000x480px|center|class=tlt-border]]  

*A list of IP addresses leased by mesh gateway can be viewed by going to '''Status''' → '''Network''' → '''Topology''' and pressing on [[File:Scan LAN Icon.png]] icon. In the screenshot, IP addresses can be seen provided to the two RUT routers as well as a device, connected to the access point, which is a smartphone in this case.

*A list of IP addresses leased by mesh gateway can be viewed by going to '''Status''' → '''Network''' → '''Topology''' and pressing on [[File:Scan LAN Icon.png]] icon. In the screenshot, IP addresses can be seen provided to the two RUT routers as well as a device, connected to the access point, which is a smartphone in this case.

[[File:Wireless Mesh Test 2.png|border|1000x246px|center|class=tlt-border]]

[[File:Wireless Mesh Test2.png|border|1000x246px|center|class=tlt-border]]

*Those IPs can be pinged from the mesh gateway despite the fact that there is no wired or mobile connection between the mesh nodes.  

*Those IPs can be pinged from the mesh gateway despite the fact that there is no wired or mobile connection between the mesh nodes.  

[[File:Wireless Mesh Test 3.png|border|center|class=tlt-border]]

[[File:Wireless Mesh Test 3.png|border|center|class=tlt-border]]