403
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 10:38, 20 September 2024
, 20 September→Configuring the Wired WAN Interface on RUT1 and RUT2
In this section, the setup of VXLAN over Wired WAN using RUT1 and RUT2 devices will be described. The process will show how to create a VXLAN tunnel to connect the devices and allow them to communicate over the wired network.
In this section, the setup of VXLAN over Wired WAN using RUT1 and RUT2 devices will be described. The process will show how to create a VXLAN tunnel to connect the devices and allow them to communicate over the wired network.
====Configuring the Wired WAN Interface on RUT1 and RUT2====
====Configuring the Wired WAN Interface on RUT1 and RUT2====
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. Navigate to the '''Network > WAN section''' in the WebUI:
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI:
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
==Configuring VXLAN over 2 Public IP addresses==
==Configuring VXLAN over 2 Public IP addresses==
