403
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 10:49, 20 September 2024
, 20 September→Configuration of VXLAN over Wired WAN
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
Configuration window will open. Adjust following:
*'''RUT1 WAN settings:'''
:#Ensure interface is '''Enabled'''
:#Change Protocol to '''Static'''
:#Enter Ipv4 address for communication in this Wired WAN network
:#Select your preferable '''IPv4 netmask'''
:# Click Save & Apply twice
==Configuring VXLAN over 2 Public IP addresses==
==Configuring VXLAN over 2 Public IP addresses==
