65
edits
Changes
802.11r WiFi roaming configuration example (view source)
Revision as of 05:18, 2 October 2024
, 2 Octoberno edit summary
===AP/WiFi Router===
===AP/WiFi Router===
----
====LAN Setting====
====LAN Setting====
Navigate to the '''Network → Interfaces → Edit LAN''', Configures as follows:
Navigate to the '''Network → Interfaces → Edit LAN''', Configures as follows:
==Result==
==Result==
===SSID Search===
----
The single AP should now be visible on your WiFi devices (an iOS phone is used in this example).
The single AP should now be visible on your WiFi devices (an iOS phone is used in this example).
[[File:Networking roaming test outcome1 v1.jpg|500px|center|border|class=tlt-border]]
[[File:Networking roaming test outcome1 v1.jpg|500px|center|border|class=tlt-border]]
Use copper connect to gateway router, login webUI navigate to '''System → Maintenance → CLI'''. Open '''CLI''' then login by username root and login password.
===Log check===
----
Use Cat6 cable connect to gateway router, login webUI navigate to '''System → Maintenance → CLI'''. Open '''CLI''' then login by username root and login password.
Do the following steps to check the result.
Do the following steps to check the result.
<ol>
<ol>
