65
edits
Changes
802.11r WiFi roaming configuration example (view source)
Revision as of 06:40, 2 October 2024
, 2 Octoberno edit summary
</ol>
</ol>
*Note: 802.11v and 802.11k can be enabled in '''Network → Wireless → SSIDs → Edit SSID → Additional setting''', which can improve performance of Fast transit. Please see the reference: [https://wiki.teltonika-networks.com/view/802.11k/v_wireless_roaming_configuration_guide'''802.11k/v wireless roaming configuration guide''']
*Note: 802.11v and 802.11k can be enabled in '''Network → Wireless → SSIDs → Edit SSID → Additional setting''', which can improve performance of Fast transit. Please see the reference: [https://wiki.teltonika-networks.com/view/802.11k/v_wireless_roaming_configuration_guide'''802.11k/v wireless roaming configuration guide''']
[[File:Networking rutx50 webui wireless ssid 802.11r FT configuration v2.png|950px|center|border|class=tlt-border]]
[[File:Networking rutx50 webui wireless ssid 802.11r FT configuration v1.png|950px|center|border|class=tlt-border]]
To reduce the posbility of interference between 2 AP/WiFi Router, Highly recommend that set radio channel manually.
To reduce the posbility of interference between 2 AP/WiFi Router, Highly recommend that set radio channel manually.
===SSID Search===
===SSID Search===
----
----
The single AP should now be visible on your WiFi devices (an iOS phone is used in this example).
The single SSID should now be visible on your WiFi devices (an iOS phone is used in this example).
[[File:Networking roaming test outcome1 v1.jpg|500px|center|border|class=tlt-border]]
[[File:Networking roaming test outcome1 v1.jpg|500px|center|border|class=tlt-border]]
Do the following steps to check the result.
Do the following steps to check the result.
<ol>
<ol>
<li>Stand close to Router 2 or Router 3.</li>
<li>Stand close to '''Router 2''' or '''Router 3'''.</li>
<li>Connect to SSID '''WiFi_Roaming'''</li>
<li>Connect to SSID '''WiFi_Roaming'''</li>
<li>Check if the connected devices are showed on wireless clients page. ('''Staus → Wireless → Interfaces''')</li>
<li>Check if the connected devices are showed on wireless clients page. ('''Staus → Wireless → Interfaces''')</li>
