Changes

[[File:Creating an ipsec instance part 3 v3.png]]

[[File:Creating an ipsec instance part 3 v3.png]]

* Below are explanations of the parameters highlighted in the figure above. Other parameters (not highlighted) are defaults. You can find descriptions for these parameters in the '''[[VPN#IPsec|VPN manual page, IPsec section]]'''.

* Below are explanations of the parameters highlighted in the figure above. Other parameters (not highlighted) are defaults. You can find descriptions for these parameters in the '''[[VPN#IPsec|VPN manual page, IPsec section]]'''

** '''Enable''' - enables the IPsec instance

** '''Enable''' - enables the IPsec instance

** '''Local IP address/Subnet mask''' - LAN IP address/Subnet mask of the router on which the IPsec instance is configured

** '''Local IP address/Subnet mask''' - LAN IP address/Subnet mask of the router on which the IPsec instance is configured