31,703
edits
Changes
Draft:Monitoring via JSON-RPC (view source)
Revision as of 16:20, 7 November 2017
, 16:20, 7 November 2017→Getting router parameters
Now that you have obtained a Session ID, you can issue commands to the router. Lets start with commands that return information about the router. For example, this is a command that returns the router's '''[[RSSI]]'''(signal strength) value:
Now that you have obtained a Session ID, you can issue commands to the router. Lets start with commands that return information about the router. For example, this is a command that returns the router's '''[[RSSI]]'''(signal strength) value:
{
{
"jsonrpc": "2.0", "id": 1, "method": "call", "params":
"jsonrpc": "2.0", "id": 1, "method": "call", "params":
"a74c8e07646f0da2bfddce35bf3de1f3", "file", "exec",
"a74c8e07646f0da2bfddce35bf3de1f3", "file", "exec",
{
{
"command":"<span style="color:orange">cat</span>",
"command":"<span style="color:orange">gsmctl</span>",
"params":
"params":
[
[
"<span style="color:orange">/etc/config/network</span>"
"<span style="color:orange">-q</span>"
]
]
}
}
]
]
}
}
The section highlighted in red is your Session ID, and the sections highlighted in orange are the command and the parameter. In this example we're using a '''gsmctl -q''' SSH command that returns the router's '''[[RSSI]]''' value:
The section highlighted in red is your Session ID, and the sections highlighted in orange are the command and the parameter. In this example we're using a '''gsmctl -q''' SSH command that returns the router's '''[[RSSI]]''' value:
