31,703
edits
Changes
GRE Tunnel configuration examples (view source)
Revision as of 07:58, 23 July 2018
, 07:58, 23 July 2018→Router configuration
** '''Remote network''' - LAN IP address of the opposite router. This and Remote network netmask are used for '''remote LAN access'''
** '''Remote network''' - LAN IP address of the opposite router. This and Remote network netmask are used for '''remote LAN access'''
** '''Remote network netmask''' - subnet mask of the opposite router's LAN
** '''Remote network netmask''' - subnet mask of the opposite router's LAN
** '''Local tunnel IP''' - virtual IP address the GRE Tunnel instance
** '''Local tunnel IP''' - virtual IP address the GRE Tunnel instance (make sure it is '''unique''' for each instance)
** '''Local tunnel netmask''' - subnet mask of the local GRE Tunnel
** '''Local tunnel netmask''' - subnet mask of the local GRE Tunnel
** '''Enable Keep alive''' - enables the tunnel's keep alive function. When enabled, the instance sends ICMP packets to the specified host at the specified frequency. If no response is received, the instance attempts to restart the connection
** '''Enable Keep alive''' - enables the tunnel's keep alive function. When enabled, the instance sends ICMP packets to the specified host at the specified frequency. If no response is received, the instance attempts to restart the connection