Changes

* Once you have all of the above in order, type in the camera's IP address into the URL field of your web browser and press "Enter".

* Once you have all of the above in order, type in the camera's IP address into the URL field of your web browser and press "Enter".

[[File:Camera webui first access.png|1150px]]

[[File:Camera webui first access.png]]

----

----

* If you are logging in for the first time, you will be greeted with a window such as this:

* If you are logging in for the first time, you will be greeted with a window such as this:

* Next, navigate to the '''Configuration''' section, under '''Network''' choose '''Basic Settings''' and '''TCP/IP'''. Change the '''IPv4 Default Gateway''' value to your router's LAN IP address and change (optional) the camera's IP address to the one you prefer (just make sure the camera and the router are in the same subnet):

* Next, navigate to the '''Configuration''' section, under '''Network''' choose '''Basic Settings''' and '''TCP/IP'''. Change the '''IPv4 Default Gateway''' value to your router's LAN IP address and change (optional) the camera's IP address to the one you prefer (just make sure the camera and the router are in the same subnet):

[[File:Hikvision configuration network tcp ip.png]]

[[File:Hikvision configuration network tcp ip.png|1150px]]

'''NOTE''': once you apply these changes it may be necessary to log in to the camera again (with new settings).

'''NOTE''': once you apply these changes it may be necessary to log in to the camera again (with new settings).