0
edits
Changes
How to manage dynamicaly the RUT 955 interfaces
Hi all
I should want to use the RUT955 device in a special application where I need to manage dynamically the interfaces ( Wi-Fi, LAN and Mobile).
WAN interface operating mode is "Main/Backup":
The Main interface is WIFI and the Backup one is Mobile.
The RUT955 unit acts as Wireless station mode and as Wireless Access Point
'''First Scenario:''' I need to switch-on the LAN ports and switch-off the Wireless Access Point Mode when NO client is connected to the Access point
'''Second Scenario:''' I need to switch-off the LAN ports and switch-on the Wireless Access Point functionality when the WIFI main interface is not connected to the configured SSID network
And finally, in correspondence of the two scenarios, I want to activate or deactivate the device onboard Outputs
Can I have indications on how to write script in order to solve the problem?
Thanks
I should want to use the RUT955 device in a special application where I need to manage dynamically the interfaces ( Wi-Fi, LAN and Mobile).
WAN interface operating mode is "Main/Backup":
The Main interface is WIFI and the Backup one is Mobile.
The RUT955 unit acts as Wireless station mode and as Wireless Access Point
'''First Scenario:''' I need to switch-on the LAN ports and switch-off the Wireless Access Point Mode when NO client is connected to the Access point
'''Second Scenario:''' I need to switch-off the LAN ports and switch-on the Wireless Access Point functionality when the WIFI main interface is not connected to the configured SSID network
And finally, in correspondence of the two scenarios, I want to activate or deactivate the device onboard Outputs
Can I have indications on how to write script in order to solve the problem?
Thanks
