1,365
edits
Changes
→Passthrough mode
[[File:Network mobile general passthrough v2.PNG]]
[[File:Network mobile general passthrough v2.PNG]]
<table class="nd-mantable">
<tr>
<th>field name</th>
<th>value</th>
<th>description</th>
</tr>
<tr>
<td>DHCP mode</td>
<td>Static {{!}} Dynamic {{!}} No DHCP; Default: '''Static'''</td>
<td>Specifies DHCP mode used with Passthrough mode
'''Static''' mode requires that you enter your computer’s MAC address (xx:xx:xx:xx:xx:xx) and select a lease time (expiration time for the leased address). The device will get an IP address from your GSM operator. Other devices that are connected to the router will get IP addresses from the router’s DHCP server, but they will not have internet access.
'''Static''' mode requires that you enter your computer’s MAC address (xx:xx:xx:xx:xx:xx) and select a lease time (expiration time for the leased address). The device will get an IP address from your GSM operator. Other devices that are connected to the router will get IP addresses from the router’s DHCP server, but they will not have internet access.
In '''Dynamic''' mode the GSM operator will connect to the router first and give out an IP address to one of your connected devices. The device will be selected at random, therefore, you should usually use Dynamic mode when you have only one device (e.g., computer) connected to the router. When using Passthrough in Dynamic mode, the router‘s LAN DHCP server will be disabled, but it will enabled again automatically when you switch to a different mode.
In '''Dynamic''' mode the GSM operator will connect to the router first and give out an IP address to one of your connected devices. The device will be selected at random, therefore, you should usually use Dynamic mode when you have only one device (e.g., computer) connected to the router. When using Passthrough in Dynamic mode, the router‘s LAN DHCP server will be disabled, but it will enabled again automatically when you switch to a different mode.
In '''No DHCP''' mode the IP address, subnet mask, default gateway and DNS from the GSM operator will have to be entered on your computer manually. When using Passthrough in No DHCP mode, the router‘s LAN DHCP server will be disabled, but it will become enabled automatically when you switch to a different mode
In '''No DHCP''' mode the IP address, subnet mask, default gateway and DNS from the GSM operator will have to be entered on your computer manually. When using Passthrough in No DHCP mode, the router‘s LAN DHCP server will be disabled, but it will become enabled automatically when you switch to a different mode</td>
</tr>
<tr>
<td>MAC address</td>
<td>mac; Default: " "</td>
<td>MAC address of the device (e.g., computer)</td>
</tr>
<tr>
<td>Lease time</td>
Lease time can be set in hours or minutes. The minimal amount of time that can be specified is 2min
<td>time; Default: '''12h'''</td>
<td>The duration of an IP lease. Leased out addresses will expire after the amount of time specified in this field and the device that was using the lease will have to send a new DHCP request to the router's DHCP server. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes, e.g., if the lease time is 12 hours, then every 6 hours the device will send a request to the router asking to renew its lease.<br>
Lease time can be set in hours or minutes. The minimal amount of time that can be specified is 2min</td>
</tr>
</table>
'''Note''': Using Passthrough mode will disable most of the router’s capabilities.
'''Note''': Using Passthrough mode will disable most of the router’s capabilities.
