Line 21: |
Line 21: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 31: |
Line 31: |
| <tr> | | <tr> |
| <td>Logout address</td> | | <td>Logout address</td> |
− | <td>host {{!}} ip; Default: '''1.1.1.1'''</td> | + | <td>host | ip; Default: '''1.1.1.1'''</td> |
| <td>An address that can be used by users to logout from the Hotspot session</td> | | <td>An address that can be used by users to logout from the Hotspot session</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Authentication protocol</td> | | <td>Authentication protocol</td> |
− | <td>PAP {{!}} CHAP; Default: '''PAP'''</td> | + | <td>PAP | CHAP; Default: '''PAP'''</td> |
| <td>Authentication protocol used to authenticate new connections on the Hotspot</td> | | <td>Authentication protocol used to authenticate new connections on the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Terms of service</td> | | <td>Terms of service</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> | | <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>RADIUS server #1 {{!}} RADIUS server #2</td> | + | <td>RADIUS server #1 | RADIUS server #2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>The IP address of the RADIUS server that is to be used for Authenticating your wireless clients </td> | | <td>The IP address of the RADIUS server that is to be used for Authenticating your wireless clients </td> |
Line 91: |
Line 91: |
| <tr> | | <tr> |
| <td>Swap octets</td> | | <td>Swap octets</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Swaps the meaning of input octets and output as it relates to RADIUS attributes</td> | | <td>Swaps the meaning of input octets and output as it relates to RADIUS attributes</td> |
| </tr> | | </tr> |
Line 101: |
Line 101: |
| <tr> | | <tr> |
| <td>External landing page</td> | | <td>External landing page</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of an external landing page</td> | | <td>Enables the use of an external landing page</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Protocol</td> | | <td>Protocol</td> |
− | <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td> | + | <td>HTTP | HTTPS; Default: '''HTTP'''</td> |
| <td>Connection protocol of your Hotspot</td> | | <td>Connection protocol of your Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 126: |
Line 126: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 150: |
Line 150: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 160: |
Line 160: |
| <tr> | | <tr> |
| <td>Logout address</td> | | <td>Logout address</td> |
− | <td>host {{!}} ip; Default: '''1.1.1.1'''</td> | + | <td>host | ip; Default: '''1.1.1.1'''</td> |
| <td>An address that can be used by users to logout from the Hotspot session</td> | | <td>An address that can be used by users to logout from the Hotspot session</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Terms of service</td> | | <td>Terms of service</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> | | <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>External landing page</td> | | <td>External landing page</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of an external landing page</td> | | <td>Enables the use of an external landing page</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Protocol</td> | | <td>Protocol</td> |
− | <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td> | + | <td>HTTP | HTTPS; Default: '''HTTP'''</td> |
| <td>Connection protocol of your Hotspot</td> | | <td>Connection protocol of your Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 200: |
Line 200: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 226: |
Line 226: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 236: |
Line 236: |
| <tr> | | <tr> |
| <td>Logout address</td> | | <td>Logout address</td> |
− | <td>host {{!}} ip; Default: '''1.1.1.1'''</td> | + | <td>host | ip; Default: '''1.1.1.1'''</td> |
| <td>An address that can be used by users to logout from the Hotspot session</td> | | <td>An address that can be used by users to logout from the Hotspot session</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Terms of service</td> | | <td>Terms of service</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> | | <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>External landing page</td> | | <td>External landing page</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of an external landing page</td> | | <td>Enables the use of an external landing page</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Protocol</td> | | <td>Protocol</td> |
− | <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td> | + | <td>HTTP | HTTPS; Default: '''HTTP'''</td> |
| <td>Connection protocol of your Hotspot</td> | | <td>Connection protocol of your Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 276: |
Line 276: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td> Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td> Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 359: |
Line 359: |
| <tr> | | <tr> |
| <td>Period</td> | | <td>Period</td> |
− | <td>Month {{!}} Week {{!}} Day; Default: '''Month'''</td> | + | <td>Month | Week | Day; Default: '''Month'''</td> |
| <td>The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset </td> | | <td>The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset </td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Start day {{!}} Start hour</td> | + | <td>Start day | Start hour</td> |
− | <td>integer [1..31] {{!}} Monday..Sunday {{!}} integer [1..24]; Default: '''day 1'''</td> | + | <td>integer [1..31] | Monday..Sunday | integer [1..24]; Default: '''day 1'''</td> |
| <td>Specifies which day of the month, week or hour of the day the limits will be reset</td> | | <td>Specifies which day of the month, week or hour of the day the limits will be reset</td> |
| </tr> | | </tr> |
Line 383: |
Line 383: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 393: |
Line 393: |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Advertisement address</td> | | <td>Advertisement address</td> |
− | <td>host {{!}} ip; Default: " "</td> | + | <td>host | ip; Default: " "</td> |
| <td>The address of the advertisement page that newly connected users will be redirected to</td> | | <td>The address of the advertisement page that newly connected users will be redirected to</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 418: |
Line 418: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 442: |
Line 442: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 452: |
Line 452: |
| <tr> | | <tr> |
| <td>Logout address</td> | | <td>Logout address</td> |
− | <td>host {{!}} ip; Default: '''1.1.1.1'''</td> | + | <td>host | ip; Default: '''1.1.1.1'''</td> |
| <td>An address that can be used by users to logout from the Hotspot session</td> | | <td>An address that can be used by users to logout from the Hotspot session</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Terms of service</td> | | <td>Terms of service</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> | | <td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Password protection</td> | | <td>Password protection</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables Hotspot password protection</td> | | <td>Enables Hotspot password protection</td> |
| </tr> | | </tr> |
Line 477: |
Line 477: |
| <tr> | | <tr> |
| <td>Website access link</td> | | <td>Website access link</td> |
− | <td>Link {{!}} Auto redirect {{!}} Custom address; Default: '''no'''</td> | + | <td>Link | Auto redirect | Custom address; Default: '''no'''</td> |
| <td>Requested website access mode</td> | | <td>Requested website access mode</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Protocol</td> | | <td>Protocol</td> |
− | <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td> | + | <td>HTTP | HTTPS; Default: '''HTTP'''</td> |
| <td>Connection protocol of your Hotspot</td> | | <td>Connection protocol of your Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 502: |
Line 502: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 526: |
Line 526: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Wi-Fi Hotspot ON or OFF</td> | | <td>Toggles Wi-Fi Hotspot ON or OFF</td> |
| </tr> | | </tr> |
Line 536: |
Line 536: |
| <tr> | | <tr> |
| <td>Authentication mode</td> | | <td>Authentication mode</td> |
− | <td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td> | + | <td>External radius | Internal radius | Without radius | Advertisement | MAC auth | SMS OTP; Default: '''Without radius'''</td> |
| <td>Authentication mode defines how users will connect to the Hotspot</td> | | <td>Authentication mode defines how users will connect to the Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Protocol</td> | | <td>Protocol</td> |
− | <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td> | + | <td>HTTP | HTTPS; Default: '''HTTP'''</td> |
| <td>Connection protocol of your Hotspot</td> | | <td>Connection protocol of your Hotspot</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>HTTPS redirect</td> | | <td>HTTPS redirect</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Redirects HTTP pages to landing page</td> | | <td>Redirects HTTP pages to landing page</td> |
| </tr> | | </tr> |
Line 561: |
Line 561: |
| <tr> | | <tr> |
| <td>Use custom DNS</td> | | <td>Use custom DNS</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables the use of custom DNS servers instead of your regular DNS</td> | | <td>Enables the use of custom DNS servers instead of your regular DNS</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DNS server 1 {{!}} DNS server 2</td> | + | <td>DNS server 1 | DNS server 2</td> |
| <td>ip; Default: " "</td> | | <td>ip; Default: " "</td> |
| <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> | | <td>Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td> |
Line 585: |
Line 585: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Enables or disables an entry of the list</td> | | <td>Enables or disables an entry of the list</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Address</td> | | <td>Address</td> |
− | <td>host {{!}} ip; Default: " "</td> | + | <td>host | ip; Default: " "</td> |
| <td>An address that users connected to the Hotspot can reach without authentication</td> | | <td>An address that users connected to the Hotspot can reach without authentication</td> |
| </tr> | | </tr> |
Line 600: |
Line 600: |
| <tr> | | <tr> |
| <td>Allow subdomains</td> | | <td>Allow subdomains</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>If checked, users can connect to the specified address and all of its subdomains</td> | | <td>If checked, users can connect to the specified address and all of its subdomains</td> |
| </tr> | | </tr> |
Line 625: |
Line 625: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles logging to FTP ON or OFF</td> | | <td>Toggles logging to FTP ON or OFF</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Server address</td> | | <td>Server address</td> |
− | <td>host {{!}} ip; Default: '''your.ftp.server'''</td> | + | <td>host | ip; Default: '''your.ftp.server'''</td> |
| <td>FTP server address.</td> | | <td>FTP server address.</td> |
| </tr> | | </tr> |
Line 650: |
Line 650: |
| <tr> | | <tr> |
| <td>File name extras</td> | | <td>File name extras</td> |
− | <td>No extra information {{!}} MAC address {{!}} Serial number {{!}} Custom string; Default: '''No extra information'''</td> | + | <td>No extra information | MAC address | Serial number | Custom string; Default: '''No extra information'''</td> |
| <td>Extra information to be added to the log filename</td> | | <td>Extra information to be added to the log filename</td> |
| </tr> | | </tr> |
Line 670: |
Line 670: |
| <tr> | | <tr> |
| <td>Mode</td> | | <td>Mode</td> |
− | <td>Fixed {{!}} Interval; Default: '''Fixed'''</td> | + | <td>Fixed | Interval; Default: '''Fixed'''</td> |
| <td>The scheduling mode to be used for uploading to FTP server</td> | | <td>The scheduling mode to be used for uploading to FTP server</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Hours {{!}} Minutes {{!}} Days</td> | + | <td>Hours | Minutes | Days</td> |
| <td>time; Default: '''8 hours 15 minutes'''</td> | | <td>time; Default: '''8 hours 15 minutes'''</td> |
| <td>Time interval when the uploads will take place</td> | | <td>Time interval when the uploads will take place</td> |
Line 710: |
Line 710: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Radius Server ON or OFF</td> | | <td>Toggles Radius Server ON or OFF</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>Remote access</td> | | <td>Remote access</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles remote access to the Radius Server ON or OFF.</td> | | <td>Toggles remote access to the Radius Server ON or OFF.</td> |
| </tr> | | </tr> |
Line 774: |
Line 774: |
| <tr> | | <tr> |
| <td>Period</td> | | <td>Period</td> |
− | <td>Month {{!}} Week {{!}} Day; Default: '''Month'''</td> | + | <td>Month | Week | Day; Default: '''Month'''</td> |
| <td>The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset </td> | | <td>The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset </td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Start day {{!}} Start hour</td> | + | <td>Start day | Start hour</td> |
− | <td>integer [1..31] {{!}} Monday..Sunday {{!}} integer [1..24]; Default: '''day 1'''</td> | + | <td>integer [1..31] | Monday..Sunday | integer [1..24]; Default: '''day 1'''</td> |
| <td>Specifies which day of the month, week or hour of the day the limits will be reset</td> | | <td>Specifies which day of the month, week or hour of the day the limits will be reset</td> |
| </tr> | | </tr> |
Line 825: |
Line 825: |
| <tr> | | <tr> |
| <td>Enable</td> | | <td>Enable</td> |
− | <td>yes {{!}} no; Default: '''no'''</td> | + | <td>yes | no; Default: '''no'''</td> |
| <td>Toggles Clients Configuration ON or OFF</td> | | <td>Toggles Clients Configuration ON or OFF</td> |
| </tr> | | </tr> |
Line 932: |
Line 932: |
| | | |
| [[Image:Services hotspot manage.PNG]] | | [[Image:Services hotspot manage.PNG]] |
| + | |
| + | [[Category:RUT850 WebUI]] |