Changes
RUT9xx Firmware via The Bootloader Menu (view source)
Revision as of 19:22, 28 November 2017
, 19:22, 28 November 2017→Upgrade
==Upgrade==
==Upgrade==
----
Firmware upgrade process via bootloader requires only few simple steps:<br />
# power OFF the device;
# set a '''Static IP''' on your PC, e.g. '''192.168.1.50''';
# press and hold RESET button on the back-panel side of the router;
# power ON the router and wait 3-4 seconds until '''all LAN LEDs start blinking simultaneously''', then - release RESET button;
# to enter bootloader's WebUI, open your browser (Chrome, Firefox, Opera) in Private mode and enter '''http://192.168.1.1/index.html''';
# once in bootloader's WebUI you can upgrade the firmware.<br />
See the details below for more information on each of these steps.
===Set up a static IP address for your PC===
===Set up a static IP address for your PC===
