31,703
edits
Changes
Template:Networking rutx manual input output (view source)
Revision as of 08:27, 14 June 2019
, 08:27, 14 June 2019no edit summary
==Summary==
==Summary==
<b>Inputs</b> and <b>Outputs</b> are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. This chapter is an overview of the Auto Reboot section for {{{name}}} routers.
<b>Inputs</b> and <b>outputs</b> are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. This chapter is an overview of the Input/Output section for {{{name}}} routers.
{{Template: Networking_rutx_manual_fw_disclosure
{{Template: Networking_rutx_manual_fw_disclosure
| fw_version = {{{fw_version}}}
| fw_version = {{{fw_version}}}
}}
}}
==Characteristics==
The router's input/output pins can be found inside the power socket:
[[File:{{{file_status_pinout}}}]]
----
The electric characteristics for the input and output are as follows:
* Digital non-isolated input: Logic low: 0 - 5 V; Logic high 8 - 40 V
* Digital open collector output: 30 V, 300 mA
==Status==
==Status==
The <b>Status</b> page displays the current states of the input and the output:
[[File:{{{file_status}}}]]
----
If you click the the button that looks like a pencil [[File:Networking_rutx_trb14x_manual_edit_button_v1.png|20px]] next to an input/output entry, you will be able to create a custom label for the pin.
You can change how the names of the pin and its states are displayed for the device's input:
[[File:{{{file_status_input}}}]]
----
You can change how the names of the pin and its states are displayed for the device's output. You can also change which state is considered to be active (high level/low level):
[[File:{{{file_status_output}}}]]
==Input==
==Input==
==Output==
==Output==
