Changes
→gps geofencing: new section
I made the mistake to upgrade from 00.04.233 to the 00.06.02 and since then I have no GPS fix at all. When you even try to enable or disable it the whole router crush and I have to reboot it via SMS command. I recently saw 00.06.02.2 and upgraded to it hopping that it will fix the problem as it states but still no improvement. It is exactly the same s***!! Please do something and fix that cause I cannot even downgrade since it will loose all settings and the unit is in a very remote place. Thanks!!
I made the mistake to upgrade from 00.04.233 to the 00.06.02 and since then I have no GPS fix at all. When you even try to enable or disable it the whole router crush and I have to reboot it via SMS command. I recently saw 00.06.02.2 and upgraded to it hopping that it will fix the problem as it states but still no improvement. It is exactly the same s***!! Please do something and fix that cause I cannot even downgrade since it will loose all settings and the unit is in a very remote place. Thanks!!
== gps geofencing ==
Hello,
after the functionality of gps geofencing has been expanded, I no longer receive an alarm if the gps leaves a created solar. Also, in the geofencing screen, the map of street map does not yet work in the edge browser. (in the "map" screen the street map map works correctly).
There is also a desire to make NMEA 0183 gps data available over ethernet by using. TCPIP as is done with serial communication.
Thanks in advance!