Changes

# Choose '''company''', select the '''CSV file''', choose '''device type''', enter '''first parameter''' as '''serial''', enter '''separation symbol''' enter '''comma (,)''' and finally enter '''MAC separator''' as '''colon''' (''':''').

# Choose '''company''', select the '''CSV file''', choose '''device type''', enter '''first parameter''' as '''serial''', enter '''separation symbol''' enter '''comma (,)''' and finally enter '''MAC separator''' as '''colon''' (''':''').

# When ready click '''Upload''' button. Keep in mind, adding more than a few hundred devices at once will take some time.

# When ready click '''Upload''' button. Keep in mind, adding more than a few hundred devices at once will take some time.

'''<span style="color:#0455a4"><big>Important!</big></span>'''

'''<span style="color:#0455a4"><big>Important!</big></span>'''

* '''Enable auto license checkmark''' - if checked, a license will automatically be assigned to the added device (if there are any available).

* '''Enable auto license checkmark''' - if checked, a license will automatically be assigned to the added device (if there are any available).

* When the status circle turns green, the system will have finished adding the device to RMS.

* When the status circle turns <span style="color:#368d3b">'''green'''</span>, the system will have finished adding the device to RMS.

* The time that it takes for all devices to be registered on the system may vary depending on the number of devices.

[[File:RMS-add-device-green-light.jpg]]

[[File:RMS-add-device-green-light.jpg]]

===Preparing CSV file===

===Preparing CSV file===

----

----

First, you must compile a list of devices. The list must be comprised of devices' <b>serial numbers</b> and <b>LAN MAC addresses</b> (<b>IMEIs</b> for TRB) and it must be stored in a <b>CSV</b> file. You can create CSV files with programs like <i>Microsoft Excel</i>, <i>OpenOffice Calc</i> or a simple text editor like <i>Notepad</i>, which we'll be using for this example.<br>Create a new text file and list your devices. An entry for a single device should be comprised of the device's serial number and LAN MAC address (or IMEI) separated by a <b>comma</b> (<b>,</b>) symbol. Different entries for different devices should be separated by <b>line breaks</b>:

You can [https://rms.teltonika.lt/src/assets/demo_files/Demo_add_device_list.csv download example file here]. Or you can prepare the CSV file for your list of devices manually. The list must be comprised of devices' <b>LAN MAC addresses</b> and <b>serial numbers</b> (<b>IMEIs</b> for TRB) and it must be stored in a <b>CSV</b> file. You can create/edit CSV files with programs like <i>Microsoft Excel</i>, <i>OpenOffice Calc</i> or a simple text editor like <i>Notepad</i>, which we'll be using for this example.

 

<br>

Create a new text file and list your devices. An entry for a single device should be comprised of the device's LAN MAC address (or IMEI) and serial number separated by a <b>comma</b> (<b>,</b>) symbol. One line should contain one device entry. See an example in the Notepad editor below.

<br>

<br>

[[File:RMS-CSV-file-example-notepad.png]]

[[File:RMS-CSV-file-example-notepad.png]]

'''<span style="color:#0455a4"><big>Important!</big></span>'''

When you're done, do not save the file as is. Instead, click the "Save As" option. Then next to "Save as type" choose "All Files" and add the '''.csv''' extension next to the file name (if you're using Linux, you can just add the same extension to the file name after saving the file the regular way):<br>[[File:Networking_rms_manual_management_device_add_device_list_part_2_v1.png]]

Once you have the list file in order, navigate your mouse pointer to the Device submenu (<b>Management → Device</b>) and click <b>Add device list</b>:<br>[[File:Networking_rms_manual_management_device_add_device_list_part_3_v1.png]]

* If you are editing the file with Notepad. Click the "Save As" option. Then next to "Save as type" choose "All Files" and add the '''.csv''' extension next to the file name

 

* If you're using Linux, you can just add the same extension to the file name after saving the file the regular way)

 

A pop-up indicating the number of new devices that have been added should appear at the top of the screen:<br>[[File:Networking_rms_manual_management_device_add_device_list_part_5_v4.png]]

----

----

Don't forget to set the <b>Connection type</b> field the <b>Enabled</b> on the device(s) that you are trying to add. You can do that from the <b>System → Administration → RMS</b>:<br>[[File:Networking rms manual management device add device part 4 v3.png]]

Although Teltonika devices have RMS service enabled by default. But make sure to set the <b>Connection type</b> field to the <b>Enabled</b> on the device(s) that you are trying to add. You can do that from the <b>System → Administration → RMS</b>.

----

[[File:RMS-connection-settings-for-webui.jpg]]

The devices should appear in the device table immediately, but at first they will be shown as offline (red). When the circle under the Status column turns green, then the devices will have finished connecting to RMS:<br>[[File:Networking_rms_manual_management_device_add_device_list_part_6_v2.png]]<br>