Changes

* After this a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left you can set the time units for that frequency. As you change these settings, an '''estimated monthly data usage''' value will be calculated below in real time:

* After this a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left you can set the time units for that frequency. As you change these settings, an '''estimated monthly data usage''' value will be calculated below in real time:

 

* '''Dynamic Monitoring''' - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.).

* '''Static Monitoring''' - every static router parameter (e.g., product code, batch number, hardware revision, etc.).

* '''Hotspot Monitoring''' - [[Hotspot]] related parameters (Hotspot SSID, Hotspot IP address, Users online).

* '''GPS Monitoring''' - [[GPS]] related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.).

* '''Dynamic parameters''' - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.)

* '''Input/Output Monitoring''' - [[Inputs/Outputs on Teltonika routers|Input/Output]] related parameters (states of inputs and outputs).

* '''Static parameters''' - every static router parameter (e.g., product code, batch number, hardware revision, etc.)

 

* '''Hotspot parameters''' - [[Hotspot]] related parameters (Hotspot SSID, Hotspot IP address, Users online)

* '''GPS parameters''' - [[GPS]] related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.)

----

* '''Input/Output parameters''' - [[Inputs/Outputs on Teltonika routers|Input/Output]] related parameters (states of inputs and outputs)

Estimated data usage calculates an estimate of monthly data usage based on the update period values specified above.

* '''Offline device detection timeout''' - specifies the frequency at which RMS will check if devices are still online. Unlike other parameters, this applies to all devices in profile

 

* '''Estimated data usage''' - calculates an estimate of monthly data usage based on the update period values specified above