31,703
edits
Changes
no edit summary
===Sleep mode===
===Sleep mode===
----
----
<b>Sleep mode</b> is a function that automatically puts the rotuer into standby mode after a user specified delay.
[[File:Networking_rut850_manual_administration_general_sleep_mode_v1.png]]
[[File:Networking_rut850_manual_administration_general_sleep_mode_v1.png]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable sleep mode</td>
<td>yes | no; default: <b>no</b></td>
<td>Turns sleep mode on or off.</td>
</tr>
<tr>
<td>Sleep delay</td>
<td>5 min. | 10 min. | 15 min. | 30 min.; default: <b>5 min.</b></td>
<td>A delay after which the router will enter sleep mode. The delay begins countdown after the sleep mode condition is met.</td>
</tr>
<tr>
<td>Sleep condition</td>
<td>Ignition | Votlage | Ignition & Voltage; default: <b>Ignition & Voltage</b></td>
<td>Specifies which type of condition will make the router enter sleep mode.</td>
</tr>
<tr>
<td>Set minimum voltage</td>
<td>voltage [0..49,5]; default: <b>11.75</b></td>
<td>Voltage under which sleep conditions are considered to be met.</td>
</tr>
</table>
==Troubleshoot==
==Troubleshoot==
The <b>Troubleshoot</b> section is used to download various files that contain information used for troubleshooting the router. Refer to the figure and table below for information on the Troubleshoot page.
The <b>Troubleshoot</b> section is used to download various files that contain information used for troubleshooting the router. Refer to the figure and table below for information on the Troubleshoot page.
[[File:Networking_rut2xx_manual_administration_troubleshoot_v1]]
[[File:Networking_rut850_manual_administration_troubleshoot_v1.png]]
<table class="nd-mantable">
<table class="nd-mantable">
</ul>
</ul>
<b>Important</b>: backup files can be uploaded only when taken from a device with an identical <b>Product code</b> (can be checked in <b>Status → [[{{{name}}} Device|Device]]</b>) and identical firmware.
<b>Important</b>: backup files can be uploaded only when taken from a device with an identical <b>Product code</b> (can be checked in <b>Status → [[RUT850 Device|Device]]</b>) and identical firmware.
==Access Control==
==Access Control==
