31,703
edits
Changes
Template:Networking rut manual user scripts (view source)
Revision as of 11:00, 26 July 2019
, 11:00, 26 July 2019Created page with "__TOC__ ==Summary== The <b>User Scripts</b> function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an..."
__TOC__
==Summary==
The <b>User Scripts</b> function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an overview of the User Scripts function in {{{name}}} routers.
==Startup script management==
The <b>startup script management</b> section shows the contents of the <i>/etc/rc.local</i> file and allows the user to edit it. This scripts written in this file are executed at the end of the device's start up process. You can also execute the script via a [[Command line interfaces|command line interface]] with the following command:
sh /etc/rc.local
The figure below is an example of the startup script management section:
[[File:{{{file_scripts}}}]]
[[Category:{{{name}}} WebUI]]
==Summary==
The <b>User Scripts</b> function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an overview of the User Scripts function in {{{name}}} routers.
==Startup script management==
The <b>startup script management</b> section shows the contents of the <i>/etc/rc.local</i> file and allows the user to edit it. This scripts written in this file are executed at the end of the device's start up process. You can also execute the script via a [[Command line interfaces|command line interface]] with the following command:
sh /etc/rc.local
The figure below is an example of the startup script management section:
[[File:{{{file_scripts}}}]]
[[Category:{{{name}}} WebUI]]
