31,703
edits
Changes
Template:Networking rutx configuration examples vrrp configuration (view source)
Revision as of 14:30, 6 August 2019
, 14:30, 6 August 2019no edit summary
----
----
<b>Explanation</b>
<b>Explanation</b>
The routers and the PC are connected to the same network (<i>192.168.1.0/24</i> via a switch. The purpose of the system is to provide an Internet connection for the PC via the the MASTER ({{#ifeq:{{{series}}}|RUTX|RUTX1|RUT1}}) router and backup that connection via the BACKUP ({{#ifeq:{{{series}}}|RUTX|RUTX2|RUT2}}) router in case the MASTER fails.
The routers and the PC are connected to the same network (<i>192.168.1.0/24</i> via a switch. The purpose of the system is to provide an Internet connection for the PC via the the MASTER ({{#ifeq:{{{series}}}|RUTX|RUTX1|RUT_1}}) router and backup that connection via the BACKUP ({{#ifeq:{{{series}}}|RUTX|RUTX2|RUT_2}}) router in case the MASTER fails.
Below is alternate topology that does not contain a switch. The configuration is identical for both cases. However, while the topology above provides a connection backup in case of any type of failure, the topology below will only backup the connection if the MASTER router loses its connection but remains available inside the network (i.e., it will not backup the connection if the MASTER is, for example, powered off).
Below is alternate topology that does not contain a switch. The configuration is identical for both cases. However, while the topology above provides a connection backup in case of any type of failure, the topology below will only backup the connection if the MASTER router loses its connection but remains available inside the network (i.e., it will not backup the connection if the MASTER is, for example, powered off).
