0
edits
Changes
Default values of HTTP and HTTPS limit enable checkbox was changed to no from yes because HTTP and HTTPS limit by default isn't enabled in RUT9
</tr>
</tr>
</table>
</table>
<span class="asterisk">*</span>When a packet goes through a firewall chain it is matched against all the rules of that specific chain. If no rule matches said packet, an according Action (Drop, Reject or Accept) is performed'''
<span class="asterisk">*</span>When a packet goes through a firewall chain it is matched against all the rules of that specific chain. If no rule matches said packet, an according Action (Drop, Reject or Accept) is performed
*<b>Accept</b> – packet gets to continue down to the next chain
*<b>Accept</b> – packet gets to continue down to the next chain
<tr>
<tr>
<td>Enable HTTP limit</td>
<td>Enable HTTP limit</td>
<td>yes | no; Default: '''yes'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles the rule ON or OFF</td>
<td>Toggles the rule ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable HTTPS limit</td>
<td>Enable HTTPS limit</td>
<td>yes | no; Default: '''yes'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles the rule ON or OFF</td>
<td>Toggles the rule ON or OFF</td>
</tr>
</tr>
