0
edits
Changes
Template:Networking rut manual upnp (view source)
Revision as of 17:01, 7 February 2020
, 17:01, 7 February 2020no edit summary
</tr>
</tr>
<tr>
<tr>
<td>Enabled</td>
<td>Enable</td>
<td>yes | no; default: '''no'''</td>
<td>off | on; Default: '''off'''</td>
<td>Turns the UPNP service on or off.</td>
<td>Toggles UPnP ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable secure mode</td>
<td>Use secure mode</td>
<td>yes | no; default: '''yes'''</td>
<td>off | on; Default: '''on'''</td>
<td>Allow adding forwards only to requesting IP addresses</td>
<td>Toggles Secure mode ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Downlink</td>
<td>Downlink</td>
<td>Default: '''1024'''</td>
<td>integer; Default: '''1024'''</td>
<td>Value in KByte/s, informational only</td>
<td>Bandwidth available for traffic coming in from the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed.</td>
</tr>
</tr>
<tr>
<tr>
<td>Uplink</td>
<td>Uplink</td>
<td>Default: '''512'''</td>
<td>integer; Default: '''512'''</td>
<td>Value in KByte/s, informational only</td>
<td>Bandwidth available for traffic out the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed.</td>
</tr>
</tr>
<tr>
<tr>
<td>Port</td>
<td>Port</td>
<td>Default: '''5000'''</td>
<td>integer [1..65535]; Default: '''5000'''</td>
<td>Port to listen for requests</td>
<td>Toggles Secure mode ON or OFF</td>
</tr>
</tr>
</table>
</table>
<th>value</th>
<th>value</th>
<th>description</th>
<th>description</th>
</tr>
</tr>
<tr>
<tr>
<td>Device UUID</td>
<td>Device UUID</td>
<td>Default:</td>
<td>string; Default: '''unique'''</td>
<td></td>
<td>The Device UUID attribute specifies and uniquely identifies a device that supports Universal Plug and Play (UPnP)</td>
</tr>
</tr>
<tr>
<tr>
<td>Announced serial number</td>
<td>Announced serial number</td>
<td>Default:</td>
<td>string; Default: " "</td>
<td></td>
<td>Specifies serial number for XML Root Desc.</td>
</tr>
</tr>
<tr>
<tr>
<td>Announced model number</td>
<td>string; Default: " "</td>
<td>Specifies model number for XML Root Desc.</td>
</tr>
</tr>
<tr>
<tr>
<td>Notify interval</td>
<td>integer; Default: " "</td>
<td>Interval in which UPnP capable devices send a message to announce their services</td>
</tr>
</tr>
<tr>
<tr>
<td>Clean ruler threshold</td>
<td>integer; Default: " "</td>
<td>Minimum number of redirections before clearing rules table of old (active) redirections</td>
</tr>
</tr>
<tr>
<tr>
<td>Clean ruler interval</td>
<td>integer; Default: " "</td>
<td>Number of seconds before cleaning redirections</td>
</tr>
</tr>
<tr>
<tr>
<td>Presentation URL</td>
<td>string; Default: " "</td>
<td>Presentation url used for the Root Desc.</td>
</tr>
</tr>
<tr>
<tr>
<td>UPnP lease file</td>
<td>string; Default: '''/var/run/miniupnpd.leases'''</td>
<td>Stores active UPnP redirects in a lease file (specified), like DHCP leases</td>
</tr>
</tr>
</table>
</table>
==UPnP ACLs==
==UPnP ACLs==
ACLs specify which external ports may be redirected to which internal addresses and ports
ACLs specify which external ports may be redirected to which internal addresses and ports. There are two preconfigured rules, one to allow high ports, and another to deny the rest. Highest priority is at the top of a list and goes down. To add another specific rule press add button
[[File:{{{file_ACLs}}}|border|class=tlt-border]]
[[File:{{{file_ACLs}}}|border|class=tlt-border]]
<tr>
<tr>
<td>Comment</td>
<td>Comment</td>
<td>Default: '''Allow high ports'''</td>
<td>string; Default: " "</td>
<td>Adds a comment to this rule</td>
<td>Adds a comment to this rule</td>
</tr>
</tr>
<tr>
<tr>
<td>External ports</td>
<td>External ports</td>
<td>Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-65535]; Default: " "</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal Addresses</td>
<td>Internal Addresses</td>
<td>Default: '''0.0.0.0/0'''</td>
<td>ip/integer [0..32]; Default: " "</td>
<td>Internal address to be redirect to</td>
<td>Internal address to be redirect to</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal ports</td>
<td>Internal ports</td>
<td>Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-655355]; Default: " "</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>Default: '''allow'''</td>
<td>allow | deny; Default: '''allow'''</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
</tr>
</tr>
</table>
</table>
[[Category:{{{name}}} WebUI]]
