0
edits
Changes
Template:Netoworking rut configuration example cisco ipsec (view source)
Revision as of 20:05, 20 February 2020
, 20:05, 20 February 2020→RUT configuration
# Write '''Remote IP address/Subnet mask''' (LAN IP address/Subnet mask of the Cisco router).
# Write '''Remote IP address/Subnet mask''' (LAN IP address/Subnet mask of the Cisco router).
Next step in configuring IPsec instance is Phase settings. For this example we left the default RUT Phase settings.
Next step in configuring IPsec instance is '''Phase''' settings. For this example we left the default RUT '''Phase 1''' and '''Phase 2''' settings.
[[File:Networking_rutxxx_configuration_example_ipsec_rut_phase1_v1.png|border|class=tlt-border]]
[[File:Networking_rutxxx_configuration_example_ipsec_rut_phase1_v1.png|border|class=tlt-border]]
[[File:Networking_rutxxx_configuration_example_ipsec_rut_phase2_v1.png|border|class=tlt-border]]
[[File:Networking_rutxxx_configuration_example_ipsec_rut_phase2_v1.png|border|class=tlt-border]]
When you're finished with the configuration, click "Save" button and then you will be prompted back to IPsec window where you will need to configure '''Pre-shared key'''.
When you're finished with the configuration, click '''Save''' button and then you will be prompted back to IPsec window where you will need to configure '''Pre-shared key'''.
[[File:Networking_rutxxx_configuration_example_ipsec_rut_preshared_key_v1.png|border|class=tlt-border]]
[[File:Networking_rutxxx_configuration_example_ipsec_rut_preshared_key_v1.png|border|class=tlt-border]]
# Press '''Add''' button.
# Write '''Pre-shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances)
==Cisco configuration==
==Cisco configuration==
