0
edits
Changes
Template:Networking rutxxx configuration example use LAN as WAN (view source)
Revision as of 21:35, 28 February 2020
, 21:35, 28 February 2020no edit summary
<ul>
<ul>
<li>Select VLAN mode: Port based</li>
<li>Select VLAN mode: Port based</li>
<li>Currently LAN interface:<br>
<li>Current LAN interface:<br>
- Enable wireless access<br>
- Enable wireless access<br>
- Select your currently LAN interface.<br>
- Select your current LAN interface.<br>
- Turn off LAN port 3 <i>(which will be used as WAN port)</i><br>
- Turn off LAN port 3 <i>(which will be used as WAN port)</i><br>
- Press '''“Save”'''.</li>
- Press '''“Save”'''.</li>
</ul>
</ul>
===Using a Static IP===
==Using DHCP==
Leave the setting as default
[[File:LANASWAN009.jpg|border|class=tlt-border]]
===CLI/SSH Router configuration (Static IP)===
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
[[File:LANASWAN005.jpg|border|class=tlt-border]]
After clicking '''“Open”''' you will need to enter router credentials.
<li>Login as: '''root'''</li>
<li>Password: routers admin password (by default admin01)</li>
[[File:LANASWAN06.jpg|border|class=tlt-border]]
<br>
Now when you are connected you will need to make changes to network settings, this will be
achieved via SSH command: '''vi''', which allows you to edit settings in the router. Enter following
command in SSH:
<li>vi /etc/config/network press latter '''i''' to be able to edit.</li>
Using arrows navigate and find '''config interface 'lan_wan'''' and add two options:
<li>1. '''option proto 'dhcp''''</li>
<li>2. '''option ifname 'eth0.1''''</li>
<li>3. '''option backup '1''''</li>
<li>4. '''option metric '10''''</li>
[[File:LANASWAN006.jpg|border|class=tlt-border]]
<br>
Press '''Esc''' and write ''':wq'''.
After that you will need to restart network service on the router, for this use command:
<li>'''/etc/init.d/network restart'''</li><br>
[[File:LANASWAN007.jpg|border|class=tlt-border]]
<br>
==Using a Static IP==
<li style="color: red;">'''Note: Just if you want to use a Static IP, see the instructions below.'''</li>
<li style="color: red;">'''Note: Just if you want to use a Static IP, see the instructions below.'''</li>
[[File:LANASWAN04.jpg|border|class=tlt-border]]
[[File:LANASWAN04.jpg|border|class=tlt-border]]
===CLI/SSH Router configuration===
===CLI/SSH Router configuration (Static IP)===
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
[[File:LANASWAN005.jpg|border|class=tlt-border]]
[[File:LANASWAN005.jpg|border|class=tlt-border]]
