0
edits
Changes
Template:Networking rutxxx configuration example use LAN as WAN (view source)
Revision as of 22:55, 28 February 2020
, 22:55, 28 February 2020no edit summary
==WebUI Router configuration==
==WebUI Router configuration==
Connect to the router’s WebUI navigate to '''Network -> VLAN -> LAN Network''' and create a new interface by entering name and clicking '''“Add New”'''.<br>
Connect to the router’s WebUI navigate to '''Network -> VLAN -> LAN Network''' and create a new interface by entering name and clicking '''Add New'''.<br>
[[File:LAN_TO_WAN02.jpg|border|class=tlt-border]]<br>
[[File:LAN_TO_WAN02.jpg|border|class=tlt-border]]<br>
After you clicked '''“Add New”''' new configuration window will pop-up, there you leave as default and press '''“Save”.'''
After you clicked '''Add New''' new configuration window will pop-up, there you leave as default and press '''Save.'''
[[File:LANASWAN02.jpg|border|class=tlt-border|600px]]
[[File:LANASWAN02.jpg|border|class=tlt-border|600px]]
- Select your current LAN interface.<br>
- Select your current LAN interface.<br>
- Turn off LAN port 3 <i>(which will be used as WAN port)</i><br>
- Turn off LAN port 3 <i>(which will be used as WAN port)</i><br>
- Press '''“Save”'''.</li>
- Press '''Save'''.</li>
<i> '''Note: Make sure that you are not connected to that LAN port which you going to disable.'''</i>
<i> '''Note: Make sure that you are not connected to that LAN port which you going to disable.'''</i>
<li>New LAN_WAN interface:<br>
<li>New LAN_WAN interface:<br>
- Click '''“Add”''' and new row will appear.<br>
- Click '''Add''' and new row will appear.<br>
- Turn off LAN ports 1-2 and leave only LAN port 3 on.<br>
- Turn off LAN ports 1-2 and leave only LAN port 3 on.<br>
- Select “lan_wan” in the LAN section and press '''“Save”'''.</li><br>
- Select “lan_wan” in the LAN section and press '''Save'''.</li><br>
[[File:LANASWAN003.jpg|border|class=tlt-border|600px]]
[[File:LANASWAN003.jpg|border|class=tlt-border|600px]]
</ul>
</ul>
==CLI/SSH Router configuration==
==CLI/SSH Router configuration==
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''putty''' will be used. Open '''putty''' enter routers LAN IP address and press '''Open'''.<br>
[[File:LANASWAN005.jpg|border|class=tlt-border|400px]]
[[File:LANASWAN005.jpg|border|class=tlt-border|400px]]
After clicking '''“Open”''' you will need to enter router credentials.
After clicking '''Open''' you will need to enter router credentials.
<li>Login as: '''root'''</li>
<li>Login as: '''root'''</li>
<li>Password: routers admin password (by default admin01)</li>
<li>Password: routers admin password (by default admin01)</li>
