0
edits
Changes
Template:Networking rutxxx configuration example use LAN as WAN (view source)
Revision as of 22:00, 3 March 2020
, 22:00, 3 March 2020no edit summary
Now when you are connected you will need to make changes to network settings, this will be
Now when you are connected you will need to make changes to network settings, this will be
achieved via SSH command: '''vi''', which allows you to edit settings in the router. Enter following
achieved via SSH command: '''vi''', which allows you to edit settings in the router. Enter following
command in SSH:
command in SSH:<br>
<li>'''vi /etc/config/network''' press latter '''i''' to be able to edit.</li>
<li>'''vi /etc/config/network''' press latter '''i''' to be able to edit.</li>
===Using DHCP===
===Using DHCP===
<li>After that, unplug the WAN cable and check again your Public IP. Your end device should have internet connection and a differt public IP</li>
<li>After that, unplug the WAN cable and check again your Public IP. Your end device should have internet connection and a differt public IP</li>
[[File:0012.png|border|class=tlt-border|960px]]<br>
[[File:0012.png|border|class=tlt-border|960px]]<br>
So, plug again the WAN internet connection and wait a few seconds. The public IP should change again to the first IP shown.
[[Category:{{{name}}} Configuration Examples]]
[[Category:{{{name}}} Configuration Examples]]
