0
edits
Changes
Template:Networking rut955 manual modbus serial (view source)
Revision as of 17:20, 10 March 2020
, 17:20, 10 March 2020no edit summary
Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.
Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.
[[File:|border|class=tlt-border]]
Then apply the following configuration:
[[File:|border|class=tlt-border]]
# '''Enable''' instance.
# Select '''Function''' (Read Holding Registers).
# Write '''Register''' (1).
# Select '''Condition''' (More than).
# Write '''Value''' (5).
# Select '''Action''' (SMS).
# Write '''Phone number''' (the number you want to receive the messages to).
# Create '''Message''' (type anything you want to receive).
# Press '''Save'''.
Now go back to '''Modbus slave simulator''' and edit this window:
[[File:|border|class=tlt-border]]
Change the value to anything below 5, you should not receive messages. Then change the value to anything above 5, you should start receiving messages.
