Changes

# Click '''Setup the communication Serial or TCP/IP port'''.

# Click '''Setup the communication Serial or TCP/IP port'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_2_v1.png|border|class=tlt-border]]

# Select the '''Port''' which you connected RS232 cable to (to find which port you are using go to Windows search bar and write '''Device Manager''' then select '''Ports''' and see which one you are using).

# Select the '''Port''' which you connected RS232 cable to (to find which port you are using go to Windows search bar and write '''Device Manager''' then select '''Ports''' and see which one you are using).

Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.

Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_3_v1.png|border|class=tlt-border]]

# Press '''Enable'''.

# Press '''Enable'''.

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_4_v1.png|border|class=tlt-border]]

Then apply the following configuration.  

Then apply the following configuration.  

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_5_v1.png|border|class=tlt-border]]

# Check '''Enable'''.

# Check '''Enable'''.