732
edits
Changes
Template:Networking device manual device recovery bootloader (view source)
Revision as of 11:05, 6 April 2020
, 11:05, 6 April 2020no edit summary
<li>While holding the reset button, plug the power cable into the router. Continue holding the button for another 4 seconds.</li>
<li>While holding the reset button, plug the power cable into the router. Continue holding the button for another 4 seconds.</li>
<li>Release the reset button.</li>
<li>Release the reset button.</li>
</ul>}}}
</ul>}}
If you followed all the steps correctly, Ethernet LEDs should start lighting up and turning OFF one after the other, from WAN port to LAN1 port. This means that the router is in the bootloader menu state. If that is not the case, repeat the steps again.
If you followed all the steps correctly, Ethernet LEDs should start lighting up and turning OFF one after the other, from WAN port to LAN1 port. This means that the router is in the bootloader menu state. If that is not the case, repeat the steps again.
