Changes

==Step 2: Configure VLANs==

==Step 2: Configure VLANs==

When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. VLAN configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.

When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. <b>VLAN</b> configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.

[[File:{{{vlan_settings_page}}}|border|class=tlt-border]]

[[File:{{{vlan_settings_page}}}|border|class=tlt-border]]

----

----

Now press the “ADD” button, which is located in the “VLANS ON SWITCH0” section.  

Now press the “<b>ADD</b>” button, which is located in the “<b>VLANS ON SWITCH0</b>” section.  

[[File:{{{vlan_section_add}}}|border|class=tlt-border]]

[[File:{{{vlan_section_add}}}|border|class=tlt-border]]

A new row should appear in the “VLANS ON SWITCH0” section.

A new row should appear in the “<b>VLANS ON SWITCH0</b>” section.

[[File:{{{vlan_section_configuration}}}|border|class=tlt-border]]

[[File:{{{vlan_section_configuration}}}|border|class=tlt-border]]

     </li>

     </li>

After changing the values press the "'''SAVE & APPLY'''" button for our configuration to take effect.

After changing the values press the "<b>SAVE & APPLY</b>" button for our configuration to take effect.

----

----

Different ISP will provide IPTV service on different VLAN ID. In our case the ID number is 6.

Different ISP will provide IPTV service on different VLAN ID. In our case the ID number is 6.

The “untagged” port can be only one in the column.

The “<b>untagged</b>” port can be only one in the column.

VLAN configuration is now done. If you need a more detailed explanation about VLANs, you can find it [[RUTX10_VLAN|here]].

VLAN configuration is now done. If you need a more detailed explanation about VLANs, you can find it [[RUTX10_VLAN|here]].