Changes

no edit summary
Line 13: Line 13:  
* One RUTxxx series router.<br>
 
* One RUTxxx series router.<br>
 
'''Configuration scheme:'''
 
'''Configuration scheme:'''
[[File:{{{file_scheme}}}|border|class=tlt-border|1100px]]
+
[[File:{{{file_scheme}}}|border|class=tlt-border|center]]
    
==Enabling JSON-RPC==
 
==Enabling JSON-RPC==
 
Before anything else, you'll need to make sure JSON-RPC is enabled on your router. JSON-RPC is enabled by default, so if you haven't made any changes to the router's access settings, everything should be in order. Otherwise you can check JSON-RPC status by logging into your router's WebUI and navigating to '''System → Administration → Access Control'''. Look for the ''WebUI'' section; there will be an '''Enable JSON RPC''' field. Make sure it is checked:
 
Before anything else, you'll need to make sure JSON-RPC is enabled on your router. JSON-RPC is enabled by default, so if you haven't made any changes to the router's access settings, everything should be in order. Otherwise you can check JSON-RPC status by logging into your router's WebUI and navigating to '''System → Administration → Access Control'''. Look for the ''WebUI'' section; there will be an '''Enable JSON RPC''' field. Make sure it is checked:
   −
[[File:WEBUI JSON.jpg|border|class=tlt-border|1100px]]
+
[[File:WEBUI JSON.jpg|border|class=tlt-border|center]]
    
==Using JSON-RPC (Windows)==
 
==Using JSON-RPC (Windows)==
Line 52: Line 52:  
<li>Once you have everything in order, click '''Send''':</li>
 
<li>Once you have everything in order, click '''Send''':</li>
 
</ul>
 
</ul>
[[File:GETTING ID.jpg|border|class=tlt-border|1100px]]
+
[[File:GETTING ID.jpg|border|class=tlt-border|center]]
 
<br>
 
<br>
 
<ul>
 
<ul>
Line 93: Line 93:  
The test highlighted in red is your Session ID, and highlighted in orange are the command and the parameter. In this example we're using a '''gsmctl -q''' command that returns the router's RSSI (signal strength) value.
 
The test highlighted in red is your Session ID, and highlighted in orange are the command and the parameter. In this example we're using a '''gsmctl -q''' command that returns the router's RSSI (signal strength) value.
   −
[[File:GETTING RSSI.jpg|border|class=tlt-border]]
+
[[File:GETTING RSSI3.jpg|border|class=tlt-border|center]]
    
Look for '''stdout''' in the post response: <span style="color:green">'''"stdout":"-69\n'''</span>". This tells us that the router's current signal strength is <span style="color:green">'''-69 dBm'''</span>.
 
Look for '''stdout''' in the post response: <span style="color:green">'''"stdout":"-69\n'''</span>". This tells us that the router's current signal strength is <span style="color:green">'''-69 dBm'''</span>.
Line 117: Line 117:  
Again the command and the parameter are highlighted in orange. In this case the '''cat''' command is used to view the contents of the  '''/etc/config/network''' file. The Response is:
 
Again the command and the parameter are highlighted in orange. In this case the '''cat''' command is used to view the contents of the  '''/etc/config/network''' file. The Response is:
   −
[[File:JSON 008.jpg|border|class=tlt-border|1100px]]
+
[[File:GETTING NETWORK.jpg|border|class=tlt-border|center]]
    
===Setting router parameters===
 
===Setting router parameters===
Line 163: Line 163:  
</ul>
 
</ul>
 
If the issued command was a success, you should see a Response like this:<br>
 
If the issued command was a success, you should see a Response like this:<br>
[[File:JSON 009.jpg|border|class=tlt-border]]
+
 
 +
[[File:CHANGING SSID.jpg|border|class=tlt-border|center]]
    
====UCI COMMIT====
 
====UCI COMMIT====
Line 182: Line 183:  
If the commit was successful, you should see the same message as before:
 
If the commit was successful, you should see the same message as before:
   −
[[File:JSON 010.jpg|border|class=tlt-border]]
+
[[File:COMMIT.jpg|border|class=tlt-border|center]]
    
====LUCI-RELOAD====
 
====LUCI-RELOAD====
Line 198: Line 199:  
  }
 
  }
 
The command itself is highlighted in orange.<br>
 
The command itself is highlighted in orange.<br>
[[File:JSON 011.jpg|border|class=tlt-border]]<br>
+
[[File:LUCI RELOAD.jpg|border|class=tlt-border|center]]<br>
    
====Setting Multiple Parameters====
 
====Setting Multiple Parameters====
685

edits

Navigation menu