31,703
edits
Changes
Template:Networking rutos manual wake on lan (view source)
Revision as of 15:17, 7 May 2020
, 15:17, 7 May 2020Created page with "{{Template:Networking_rutos_manual_fw_disclosure | fw_version = {{{series}}}_R_00.02.04 | series = {{{series}}} }} __TOC__ ==Summary== <b>Wake on LAN</b> (<b>WOL</b>) is..."
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.04
| series = {{{series}}}
}}
__TOC__
==Summary==
<b>Wake on LAN</b> (<b>WOL</b>) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in {{{name}}} devices.
{{Template: Networking_rutx_manual_fw_disclosure
| fw_version = {{{fw_version}}}
}}
==Wake on LAN configuration==
You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the <b>Wake on LAN configuration</b> section:
[[File:{{{file_wol_config}}}]]
<table class="nd-mantable">
<tr>
<th>Field name</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Broadcast</td>
<td>off | on; default: <b>off</b></td>
<td>If checked, the WOL function sends a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF) whenever it is asked to wake a device. When you send a packet to the broadcast address it is received by all LAN devices.</td>
</tr>
<tr>
<td>Wake all devices</td>
<td>- (interactive button)</td>
<td>Wakes all devices by sending a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF).</td>
</tr>
</table>
==Wake on LAN devices==
The <b>Wake on LAN devices</b> section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure bellow for information on the fields contained in the Wake on LAN devices section.
[[File:{{{file_wol_devices}}}]]
<table class="nd-mantable">
<tr>
<th>Field name</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Name</td>
<td>string; default: <b>example</b></td>
<td>A custom name for the device. Only used for easier management purposes.</td>
</tr>
<tr>
<td>MAC</td>
<td>mac; default: <b>11:22:33:44:55:66</b></td>
<td>MAC address of the network interface card of the computer that will be "woken up".</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>AABBCCDDEEFF</b></td>
<td>SecureON Password - sends given password when attempting to wake the host. Some computers have a BIOS feature that secures the WOL feature with a password. If your BIOS does not require such a password, leave this field empty.</td>
</tr>
<tr>
<td>Wake on Boot</td>
<td>off | on; default: <b>off</b></td>
<td>Indicates whether the device should be "woken up" on device startup.</td>
</tr>
<tr>
<td>Wake device</td>
<td>- (interactive button)</td>
<td>Sends a magic packet to the specified device.</td>
</tr>
<tr>
<td>Delete</td>
<td>- (interactive button)</td>
<td>Deletes the device configuration.</td>
</tr>
</table>
==See also==
<ul>
<li>[[{{{name}}} Wake on LAN PC setup (Windows)|Wake on LAN PC configuration instructions]]</li>
</ul>
[[Category:{{{name}}} Services section]]
| fw_version = {{{series}}}_R_00.02.04
| series = {{{series}}}
}}
__TOC__
==Summary==
<b>Wake on LAN</b> (<b>WOL</b>) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in {{{name}}} devices.
{{Template: Networking_rutx_manual_fw_disclosure
| fw_version = {{{fw_version}}}
}}
==Wake on LAN configuration==
You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the <b>Wake on LAN configuration</b> section:
[[File:{{{file_wol_config}}}]]
<table class="nd-mantable">
<tr>
<th>Field name</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Broadcast</td>
<td>off | on; default: <b>off</b></td>
<td>If checked, the WOL function sends a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF) whenever it is asked to wake a device. When you send a packet to the broadcast address it is received by all LAN devices.</td>
</tr>
<tr>
<td>Wake all devices</td>
<td>- (interactive button)</td>
<td>Wakes all devices by sending a magic packet to the broadcast address (FF:FF:FF:FF:FF:FF).</td>
</tr>
</table>
==Wake on LAN devices==
The <b>Wake on LAN devices</b> section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure bellow for information on the fields contained in the Wake on LAN devices section.
[[File:{{{file_wol_devices}}}]]
<table class="nd-mantable">
<tr>
<th>Field name</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Name</td>
<td>string; default: <b>example</b></td>
<td>A custom name for the device. Only used for easier management purposes.</td>
</tr>
<tr>
<td>MAC</td>
<td>mac; default: <b>11:22:33:44:55:66</b></td>
<td>MAC address of the network interface card of the computer that will be "woken up".</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>AABBCCDDEEFF</b></td>
<td>SecureON Password - sends given password when attempting to wake the host. Some computers have a BIOS feature that secures the WOL feature with a password. If your BIOS does not require such a password, leave this field empty.</td>
</tr>
<tr>
<td>Wake on Boot</td>
<td>off | on; default: <b>off</b></td>
<td>Indicates whether the device should be "woken up" on device startup.</td>
</tr>
<tr>
<td>Wake device</td>
<td>- (interactive button)</td>
<td>Sends a magic packet to the specified device.</td>
</tr>
<tr>
<td>Delete</td>
<td>- (interactive button)</td>
<td>Deletes the device configuration.</td>
</tr>
</table>
==See also==
<ul>
<li>[[{{{name}}} Wake on LAN PC setup (Windows)|Wake on LAN PC configuration instructions]]</li>
</ul>
[[Category:{{{name}}} Services section]]
