31,703
edits
Changes
Template:Networking rutos manual events reporting (view source)
Revision as of 16:33, 7 May 2020
, 16:33, 7 May 2020Created page with "==Summary== The '''Events Reporting''' section gives you the ability to configure rules that will inform you via SMS or email when certain events occur on your device. These..."
==Summary==
The '''Events Reporting''' section gives you the ability to configure rules that will inform you via SMS or email when certain events occur on your device. These events can be almost anything – configuration changes, reboots, new connections, various status updates, SIM switches, etc. This page is an overview of the Events Reporting section for {{{name}}} devices.
<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>[[Media:{{{fw_version}}}_single.bin|{{{fw_version}}}]]</b></span> firmware version.</span>
===Events Reporting Rules===
----
'''Events Reporting Rules''' window display rules that you set up for such events as logins, reboots, resets, connections, configuration changes and more, that you want to be informed about, through SMS messages or emails. Click the '''Add''' button, it will redirect to '''[[{{{name}}} Events Reporting#Events Reporting Configuration|Events Reporting Configuration]]''' window for new rule, and click on '''Edit''' button [[File:Networking_rutx_manual_edit_button_v1.png]] to modify already existing rule.
[[File:Networking_rutx_manual_events_reporting_rules_v2.png|border|class=tlt-border]]
===Events Reporting Configuration===
----
'''Events Reporting Configuration''' is used to customize Events Reporting rules. Here you can specify any event type and subtype, you want to be informed about by your chosen message type.
[[File:Networking_rutx_manual_events_reporting_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>field name</th>
<th>value</th>
<th>description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; Default: '''on'''</td>
<td>Toggles the rule ON or OFF</td>
</tr>
<tr>
<td>Event type</td>
<td>Config change | New DHCP client | Mobile data | SMS | Signal Strength | Reboot | SSH | WebUI | Ports state | Topology changes | WAN Failover | GPS; Default: '''Config change'''</td>
<td>The type of event that you wish to receive information about</td>
</tr>
<tr>
<td>Event subtype</td>
<td>'''Sample:''' All</td>
<td>Specified event's sub-type. This field changes in accordance with '''Event type'''</td>
</tr>
<tr>
<td>Action</td>
<td>Send SMS | Send email; Default: '''Send email'''</td>
<td>Action that is to be taken after the specified event occurs</td>
</tr>
<tr>
<td>Message text on Event</td>
<td>string; Default: '''device name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts;'''</td>
<td>Specifies the text that the message will contain</td>
</tr>
<tr>
<td><span style="color: #0054a6;">Send SMS: Recipients</td>
<td>Single number | Group; Default: '''Single number'''</td>
<td>Specifies the intended recipient, or user group. A guide on how to create a User group can be found in the SMS Utilities chapter, '''[[SMS_Utilities#User_Groups| User Groups]]''' section.</td>
</tr>
<tr>
<td><span style="color: #0054a6;">Send SMS: Recipient's phone number</td>
<td>phone number; Default: " "</td>
<td>The intended recipient's phone number. The phone number must be entered in the international format, but without dash symbols or spaces, e.g., '''+37061234567'''</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Subject</td>
<td>string; Default: " "</td>
<td>Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Email user</td>
<td>Previously created Email user</td>
<td>Choose non empty email configuration from email groups. Emails can be configured in '''[[Administration#Users_&_Recipients| Users & Recipients]]''' section.</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Recipient's email address</td>
<td>Email address; Default: " "</td>
<td>The intended recipient's email address. Allowed characters (a-zA-Z0-9._%+@-)</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Send test email</td>
<td>Interactive button</td>
<td>Sends test email to chosen recipient.</td>
</tr>
</table>
====Event Types and Sub-types====
----
The example provided above is concerning the '''GPS''' Event type and '''Left geofence''' sub-type. This section is an overview of all other Event type and sub-types.
=====Config change=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when any type of configuration changes are applied</td>
</tr>
<tr>
<td>OpenVPN</td>
<td>Sends a report message when any '''[[{{{name}}} VPN#OpenVPN|OpenVPN]]''' configuration changes are applied. For example, whenever a new OpenVPN instance is created, an OpenVPN instance gets disabled/enabled, an OpenVPN instance's protocol is changed from UDP to TCP or vice versa, etc.</td>
</tr>
<tr>
<td>SMS</td>
<td>Sends a report message when any SMS related configuration changes are applied. For example, whenever a new '''[[{{{name}}}_Mobile_Utilities#SMS_Utilities|SMS Utilities]]''' rule is created or changed, changes are made to '''[[{{{name}}}_Mobile_Utilities#SMS_Gateway#Auto_Reply|Auto Reply]]''', etc.</td>
</tr>
<tr>
<td>Multiwan</td>
<td>Sends a report message when changes to WAN '''[[{{{name}}} WAN#Backup_Configuration|Backup]]''' configuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor configurations are changed, etc.</td>
</tr>
<tr>
<td>Mobile</td>
<td>Sends a report message when any '''[[{{{name}}} Mobile]]''' configuration changes are applied. For example, whenever Service mode, APN, Connection type is changed, etc.</td>
</tr>
<tr>
<td>Data limit</td>
<td>Sends a report message when any '''[[{{{name}}} Mobile#Mobile_Data_Limit|Mobile Data Limit]]''' configuration changes are applied. For example, whenever new data limit is configured, data limit gets disabled/enabled on SIM1/SIM2, data limit period is changed, etc.</td>
</tr>
<tr>
<td>GPS</td>
<td>Sends a report message when any configuration changes concerning '''[[{{{name}}} GPS]]''' are applied. For example, whenever GPS gets enabled/disabled, Remote host/IP address is changed, new '''[[{{{name}}} GPS#GPS_Geofencing|Geofencing]]''' area is defined, etc.</td>
</tr>
<tr>
<td>Events reporting</td>
<td>Sends a report message when any configuration changes to Events Reporting are applied. For example, whenever a new Events Reporting Rule is created, changed, deleted, etc.</td>
</tr>
<tr>
<td>Periodic reboot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Auto_Reboot#Periodic_Reboot|Periodic Reboot]]''' are applied. For example, whenever Periodic Reboot gets enabled/disabled, Periodic Reboot interval is changed, etc.</td>
</tr>
<tr>
<td>SNMP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} SNMP]]''' are applied. For example, whenever SNMP service is enabled/disabled, SNMP remote access is enabled/disabled, SNMP port is changed, etc.</td>
</tr>
<tr>
<td>Ping reboot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Auto_Reboot#Ping_Reboot|Ping Reboot]]''' are applied. For example, whenever Ping Reboot gets enabled/disabled, host to ping has changed, etc.</td>
</tr>
<tr>
<td>Site blocking</td>
<td> Sends a report message when any configuration changes to '''[[{{{name}}} Web_Filter#Site_Blocking|Site Blocking]]''' are applied. For example, whenever Whitelist is changed to Blacklist or vice versa, a new entry is added to Blacklist/Whitelist, etc.</td>
</tr>
{{#ifeq: {{{name}}}|RUTX11|
<tr>
<td>Hotspot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Hotspot]]''' are applied. For example, whenever Hotspot SSID was changed, Radius server was changed, Hotspot was enabled/disabled, etc.</td>
</tr>||
}}
<tr>
<td>Content blocker</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Web_Filter#Proxy_Based_Content_Blocker|Proxy Based Content Blocker]]''' are applied. For example, whenever Whitelist is changed to Blacklist or vice versa, a new entry is added to Blacklist/Whitelist, etc.</td>
</tr>
<tr>
<td>Profiles</td>
<td>Sends a report message when a new '''[[{{{name}}} Profiles|Profile]]''' is added or deleted.</td>
</tr>
<tr>
<td>DDNS</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Dynamic DNS|Dynamic DNS]]''' are applied. For example, whenever a new DDNS instance is created, changed, deleted or edited.</td>
</tr>
<tr>
<td>IPsec</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} VPN#IPsec|IPsec]]''' are applied. For example, a new IPsec instance is created, changed, deleted, etc.</td>
</tr>
<tr>
<td>DHCP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} LAN|DHCP]]''' are applied. For example, whenever DHCP Server is enabled/disabled, DHCP address range is changed.</td>
</tr>
<tr>
<td>VRRP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} VRRP]]''' are applied. For example, whenever VRRP is enabled/disabled, VRRP IP address is changed, etc.</td>
</tr>
<tr>
<td>SSH</td>
<td>Sends a report message when any configuration changes to SSH are applied.</td>
</tr>
<tr>
<td>Network</td>
<td>Sends a report message when any Network related configuration changes are applied. For example, whenever Main WAN is changed, LAN IP address is changed, a Wi-Fi Access Point is enabled/disabled, etc.</td>
</tr>
{{#ifeq: {{{name}}}|RUTX11|
<tr>
<td>Wireless</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Wireless]]''' are applied. For example, a new Wi-Fi Access point is created, deleted, enabled/disabled, SSID is changed, etc.</td>
</tr>||
}}
<tr>
<td>Firewall</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Firewall]]''' are applied. For example, a new Traffic rule is added, a new SNAT rule is added, a rule is disabled/enabled, etc.</td>
</tr>
<tr>
<td>NTP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} NTP]]''' are applied. For example, whenever NTP is enabled/disabled, Time zone is changed, etc.</td>
</tr>
<tr>
<td>UPNP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} UPNP]]''' are applied. For example, whenever usable port range is changed, etc.</td>
</tr>
</table>
=====New DHCP client=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when a new devices is connected to the device either via LAN or Wi-Fi.</td>
</tr>
<tr>
<td>Connected from WiFi</td>
<td>Sends a report message when a new device is connected to the device via Wi-Fi.</td>
</tr>
<tr>
<td>Connected from LAN</td>
<td>Sends a report message when a new device is connected to the device via LAN port.</td>
</tr>
</table>
=====Mobile Data=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when mobile data connection is achieved or lost.</td>
</tr>
<tr>
<td>Connected</td>
<td>Sends a report message when mobile data connection is achieved.</td>
</tr>
<tr>
<td>Disconnected</td>
<td>Sends a report message when mobile data connection is lost.</td>
</tr>
</table>
=====SMS=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>SMS received</td>
<td>Sends a report message when the device receives a new SMS message.</td>
</tr>
</table>
=====Signal Strength=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when the device's '''[[RSSI]]''' value leaves any one of the below specified ranges.</td>
</tr>
<tr>
<td>-121 dBm -113 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -121 dBm to -113 dBm range.</td>
</tr>
<tr>
<td>-113 dBm -98 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -113 dBm to -98 dBm range.</td>
</tr>
<tr>
<td>-98 dBm -93 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -98 dBm to -93 dBm range.</td>
</tr>
<tr>
<td>-93 dBm -75 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -93 dBm to -75 dBm range.</td>
</tr>
<tr>
<td>-75 dBm -60 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -75 dBm to -60 dBm range.</td>
</tr>
<tr>
<td>-60 dBm -50 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -60 dBm to -50 dBm range.</td>
</tr>
</table>
=====Reboot=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when the device starts up after any type of reboot (except factory reset).</td>
</tr>
<tr>
<td>From WebUI</td>
<td>Sends a report message when the device starts up after a reboot command is initiated from the device's WebUI Administration->Reboot section.</td>
</tr>
<tr>
<td>From Input/Output</td>
<td>Sends a report message when the device starts up after a reboot command is initiated via Input/Output.</td>
</tr>
<tr>
<td>From ping reboot</td>
<td>Sends a report message when the device starts up after a reboot command is initiated by the Ping Reboot function.</td>
</tr>
<tr>
<td>From periodic reboot</td>
<td>Sends a report message when the device starts up after a reboot command is initiated by the Periodic Reboot function.</td>
</tr>
<tr>
<td>From button</td>
<td>Sends a report message when the device starts up after being restarted by the press of the physical button located on the device.</td>
</tr>
</table>
=====SSH=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when someone connects to the device via SSH (either successfully or unsuccessfully).</td>
</tr>
<tr>
<td>Successful authentication</td>
<td>Sends a report message when someone successfully connects to the device via SSH.</td>
</tr>
<tr>
<td>Unsuccessful authentication</td>
<td>Sends a report message when someone unsuccessfully tries to connect to the device via SSH.</td>
</tr>
</table>
=====WebUI=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when someone connects to the device via HTTP or HTTPS (either successfully or unsuccessfully).</td>
</tr>
<tr>
<td>Successful authentication</td>
<td>Sends a report message when someone successfully connects to the device via HTTP or HTTPS.</td>
</tr>
<tr>
<td>Unsuccessful authentication</td>
<td>Sends a report message when someone unsuccessfully tries to connect to the device via HTTP or HTTPS.</td>
</tr>
</table>
=====Ports State=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when a device is either plugged in or unplugged from one of the device's LAN ports.</td>
</tr>
<tr>
<td>Link state</td>
<td>Sends a report message when a device is plugged or unplugged from one of the device's Ethernet ports.</td>
</tr>
<tr>
<td>Link speed</td>
<td>Sends a report message when Port Link speed is decided.</td>
</tr>
</table>
=====Topology state=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>Topology changes</td>
<td>Sends a report message when there are changes in network topology.</td>
</tr>
</table>
[[Category:{{{name}}} Services section]]
The '''Events Reporting''' section gives you the ability to configure rules that will inform you via SMS or email when certain events occur on your device. These events can be almost anything – configuration changes, reboots, new connections, various status updates, SIM switches, etc. This page is an overview of the Events Reporting section for {{{name}}} devices.
<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>[[Media:{{{fw_version}}}_single.bin|{{{fw_version}}}]]</b></span> firmware version.</span>
===Events Reporting Rules===
----
'''Events Reporting Rules''' window display rules that you set up for such events as logins, reboots, resets, connections, configuration changes and more, that you want to be informed about, through SMS messages or emails. Click the '''Add''' button, it will redirect to '''[[{{{name}}} Events Reporting#Events Reporting Configuration|Events Reporting Configuration]]''' window for new rule, and click on '''Edit''' button [[File:Networking_rutx_manual_edit_button_v1.png]] to modify already existing rule.
[[File:Networking_rutx_manual_events_reporting_rules_v2.png|border|class=tlt-border]]
===Events Reporting Configuration===
----
'''Events Reporting Configuration''' is used to customize Events Reporting rules. Here you can specify any event type and subtype, you want to be informed about by your chosen message type.
[[File:Networking_rutx_manual_events_reporting_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>field name</th>
<th>value</th>
<th>description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; Default: '''on'''</td>
<td>Toggles the rule ON or OFF</td>
</tr>
<tr>
<td>Event type</td>
<td>Config change | New DHCP client | Mobile data | SMS | Signal Strength | Reboot | SSH | WebUI | Ports state | Topology changes | WAN Failover | GPS; Default: '''Config change'''</td>
<td>The type of event that you wish to receive information about</td>
</tr>
<tr>
<td>Event subtype</td>
<td>'''Sample:''' All</td>
<td>Specified event's sub-type. This field changes in accordance with '''Event type'''</td>
</tr>
<tr>
<td>Action</td>
<td>Send SMS | Send email; Default: '''Send email'''</td>
<td>Action that is to be taken after the specified event occurs</td>
</tr>
<tr>
<td>Message text on Event</td>
<td>string; Default: '''device name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts;'''</td>
<td>Specifies the text that the message will contain</td>
</tr>
<tr>
<td><span style="color: #0054a6;">Send SMS: Recipients</td>
<td>Single number | Group; Default: '''Single number'''</td>
<td>Specifies the intended recipient, or user group. A guide on how to create a User group can be found in the SMS Utilities chapter, '''[[SMS_Utilities#User_Groups| User Groups]]''' section.</td>
</tr>
<tr>
<td><span style="color: #0054a6;">Send SMS: Recipient's phone number</td>
<td>phone number; Default: " "</td>
<td>The intended recipient's phone number. The phone number must be entered in the international format, but without dash symbols or spaces, e.g., '''+37061234567'''</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Subject</td>
<td>string; Default: " "</td>
<td>Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Email user</td>
<td>Previously created Email user</td>
<td>Choose non empty email configuration from email groups. Emails can be configured in '''[[Administration#Users_&_Recipients| Users & Recipients]]''' section.</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Recipient's email address</td>
<td>Email address; Default: " "</td>
<td>The intended recipient's email address. Allowed characters (a-zA-Z0-9._%+@-)</td>
</tr>
<tr>
<td><span style="color: red;">Send email: Send test email</td>
<td>Interactive button</td>
<td>Sends test email to chosen recipient.</td>
</tr>
</table>
====Event Types and Sub-types====
----
The example provided above is concerning the '''GPS''' Event type and '''Left geofence''' sub-type. This section is an overview of all other Event type and sub-types.
=====Config change=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when any type of configuration changes are applied</td>
</tr>
<tr>
<td>OpenVPN</td>
<td>Sends a report message when any '''[[{{{name}}} VPN#OpenVPN|OpenVPN]]''' configuration changes are applied. For example, whenever a new OpenVPN instance is created, an OpenVPN instance gets disabled/enabled, an OpenVPN instance's protocol is changed from UDP to TCP or vice versa, etc.</td>
</tr>
<tr>
<td>SMS</td>
<td>Sends a report message when any SMS related configuration changes are applied. For example, whenever a new '''[[{{{name}}}_Mobile_Utilities#SMS_Utilities|SMS Utilities]]''' rule is created or changed, changes are made to '''[[{{{name}}}_Mobile_Utilities#SMS_Gateway#Auto_Reply|Auto Reply]]''', etc.</td>
</tr>
<tr>
<td>Multiwan</td>
<td>Sends a report message when changes to WAN '''[[{{{name}}} WAN#Backup_Configuration|Backup]]''' configuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor configurations are changed, etc.</td>
</tr>
<tr>
<td>Mobile</td>
<td>Sends a report message when any '''[[{{{name}}} Mobile]]''' configuration changes are applied. For example, whenever Service mode, APN, Connection type is changed, etc.</td>
</tr>
<tr>
<td>Data limit</td>
<td>Sends a report message when any '''[[{{{name}}} Mobile#Mobile_Data_Limit|Mobile Data Limit]]''' configuration changes are applied. For example, whenever new data limit is configured, data limit gets disabled/enabled on SIM1/SIM2, data limit period is changed, etc.</td>
</tr>
<tr>
<td>GPS</td>
<td>Sends a report message when any configuration changes concerning '''[[{{{name}}} GPS]]''' are applied. For example, whenever GPS gets enabled/disabled, Remote host/IP address is changed, new '''[[{{{name}}} GPS#GPS_Geofencing|Geofencing]]''' area is defined, etc.</td>
</tr>
<tr>
<td>Events reporting</td>
<td>Sends a report message when any configuration changes to Events Reporting are applied. For example, whenever a new Events Reporting Rule is created, changed, deleted, etc.</td>
</tr>
<tr>
<td>Periodic reboot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Auto_Reboot#Periodic_Reboot|Periodic Reboot]]''' are applied. For example, whenever Periodic Reboot gets enabled/disabled, Periodic Reboot interval is changed, etc.</td>
</tr>
<tr>
<td>SNMP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} SNMP]]''' are applied. For example, whenever SNMP service is enabled/disabled, SNMP remote access is enabled/disabled, SNMP port is changed, etc.</td>
</tr>
<tr>
<td>Ping reboot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Auto_Reboot#Ping_Reboot|Ping Reboot]]''' are applied. For example, whenever Ping Reboot gets enabled/disabled, host to ping has changed, etc.</td>
</tr>
<tr>
<td>Site blocking</td>
<td> Sends a report message when any configuration changes to '''[[{{{name}}} Web_Filter#Site_Blocking|Site Blocking]]''' are applied. For example, whenever Whitelist is changed to Blacklist or vice versa, a new entry is added to Blacklist/Whitelist, etc.</td>
</tr>
{{#ifeq: {{{name}}}|RUTX11|
<tr>
<td>Hotspot</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Hotspot]]''' are applied. For example, whenever Hotspot SSID was changed, Radius server was changed, Hotspot was enabled/disabled, etc.</td>
</tr>||
}}
<tr>
<td>Content blocker</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Web_Filter#Proxy_Based_Content_Blocker|Proxy Based Content Blocker]]''' are applied. For example, whenever Whitelist is changed to Blacklist or vice versa, a new entry is added to Blacklist/Whitelist, etc.</td>
</tr>
<tr>
<td>Profiles</td>
<td>Sends a report message when a new '''[[{{{name}}} Profiles|Profile]]''' is added or deleted.</td>
</tr>
<tr>
<td>DDNS</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Dynamic DNS|Dynamic DNS]]''' are applied. For example, whenever a new DDNS instance is created, changed, deleted or edited.</td>
</tr>
<tr>
<td>IPsec</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} VPN#IPsec|IPsec]]''' are applied. For example, a new IPsec instance is created, changed, deleted, etc.</td>
</tr>
<tr>
<td>DHCP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} LAN|DHCP]]''' are applied. For example, whenever DHCP Server is enabled/disabled, DHCP address range is changed.</td>
</tr>
<tr>
<td>VRRP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} VRRP]]''' are applied. For example, whenever VRRP is enabled/disabled, VRRP IP address is changed, etc.</td>
</tr>
<tr>
<td>SSH</td>
<td>Sends a report message when any configuration changes to SSH are applied.</td>
</tr>
<tr>
<td>Network</td>
<td>Sends a report message when any Network related configuration changes are applied. For example, whenever Main WAN is changed, LAN IP address is changed, a Wi-Fi Access Point is enabled/disabled, etc.</td>
</tr>
{{#ifeq: {{{name}}}|RUTX11|
<tr>
<td>Wireless</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Wireless]]''' are applied. For example, a new Wi-Fi Access point is created, deleted, enabled/disabled, SSID is changed, etc.</td>
</tr>||
}}
<tr>
<td>Firewall</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} Firewall]]''' are applied. For example, a new Traffic rule is added, a new SNAT rule is added, a rule is disabled/enabled, etc.</td>
</tr>
<tr>
<td>NTP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} NTP]]''' are applied. For example, whenever NTP is enabled/disabled, Time zone is changed, etc.</td>
</tr>
<tr>
<td>UPNP</td>
<td>Sends a report message when any configuration changes to '''[[{{{name}}} UPNP]]''' are applied. For example, whenever usable port range is changed, etc.</td>
</tr>
</table>
=====New DHCP client=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when a new devices is connected to the device either via LAN or Wi-Fi.</td>
</tr>
<tr>
<td>Connected from WiFi</td>
<td>Sends a report message when a new device is connected to the device via Wi-Fi.</td>
</tr>
<tr>
<td>Connected from LAN</td>
<td>Sends a report message when a new device is connected to the device via LAN port.</td>
</tr>
</table>
=====Mobile Data=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when mobile data connection is achieved or lost.</td>
</tr>
<tr>
<td>Connected</td>
<td>Sends a report message when mobile data connection is achieved.</td>
</tr>
<tr>
<td>Disconnected</td>
<td>Sends a report message when mobile data connection is lost.</td>
</tr>
</table>
=====SMS=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>SMS received</td>
<td>Sends a report message when the device receives a new SMS message.</td>
</tr>
</table>
=====Signal Strength=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when the device's '''[[RSSI]]''' value leaves any one of the below specified ranges.</td>
</tr>
<tr>
<td>-121 dBm -113 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -121 dBm to -113 dBm range.</td>
</tr>
<tr>
<td>-113 dBm -98 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -113 dBm to -98 dBm range.</td>
</tr>
<tr>
<td>-98 dBm -93 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -98 dBm to -93 dBm range.</td>
</tr>
<tr>
<td>-93 dBm -75 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -93 dBm to -75 dBm range.</td>
</tr>
<tr>
<td>-75 dBm -60 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -75 dBm to -60 dBm range.</td>
</tr>
<tr>
<td>-60 dBm -50 dBm</td>
<td>Sends a report message when the device's RSSI value leaves the -60 dBm to -50 dBm range.</td>
</tr>
</table>
=====Reboot=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when the device starts up after any type of reboot (except factory reset).</td>
</tr>
<tr>
<td>From WebUI</td>
<td>Sends a report message when the device starts up after a reboot command is initiated from the device's WebUI Administration->Reboot section.</td>
</tr>
<tr>
<td>From Input/Output</td>
<td>Sends a report message when the device starts up after a reboot command is initiated via Input/Output.</td>
</tr>
<tr>
<td>From ping reboot</td>
<td>Sends a report message when the device starts up after a reboot command is initiated by the Ping Reboot function.</td>
</tr>
<tr>
<td>From periodic reboot</td>
<td>Sends a report message when the device starts up after a reboot command is initiated by the Periodic Reboot function.</td>
</tr>
<tr>
<td>From button</td>
<td>Sends a report message when the device starts up after being restarted by the press of the physical button located on the device.</td>
</tr>
</table>
=====SSH=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when someone connects to the device via SSH (either successfully or unsuccessfully).</td>
</tr>
<tr>
<td>Successful authentication</td>
<td>Sends a report message when someone successfully connects to the device via SSH.</td>
</tr>
<tr>
<td>Unsuccessful authentication</td>
<td>Sends a report message when someone unsuccessfully tries to connect to the device via SSH.</td>
</tr>
</table>
=====WebUI=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when someone connects to the device via HTTP or HTTPS (either successfully or unsuccessfully).</td>
</tr>
<tr>
<td>Successful authentication</td>
<td>Sends a report message when someone successfully connects to the device via HTTP or HTTPS.</td>
</tr>
<tr>
<td>Unsuccessful authentication</td>
<td>Sends a report message when someone unsuccessfully tries to connect to the device via HTTP or HTTPS.</td>
</tr>
</table>
=====Ports State=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>All</td>
<td>Sends a report message when a device is either plugged in or unplugged from one of the device's LAN ports.</td>
</tr>
<tr>
<td>Link state</td>
<td>Sends a report message when a device is plugged or unplugged from one of the device's Ethernet ports.</td>
</tr>
<tr>
<td>Link speed</td>
<td>Sends a report message when Port Link speed is decided.</td>
</tr>
</table>
=====Topology state=====
----
<table class="nd-mantable">
<tr>
<th style="width: 250px">event sub-type</th>
<th style="width: 904px">description</th>
</tr>
<tr>
<td>Topology changes</td>
<td>Sends a report message when there are changes in network topology.</td>
</tr>
</table>
[[Category:{{{name}}} Services section]]
