Changes
Template:Networking rutos manual overview (view source)
Revision as of 07:41, 8 May 2020
, 07:41, 8 May 2020Created page with "{{Template:Networking_rutos_manual_fw_disclosure | fw_version = {{{series}}}_R_00.02.03 | series = {{{series}}} }} __TOC__ ==Summary== The <b>Overview</b> page contains vario..."
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.03
| series = {{{series}}}
}}
__TOC__
==Summary==
The <b>Overview</b> page contains various information summaries and shortcuts to other pages. It is also the homepage of the WebUI. This chapter is an overview of the Overview page for {{{name}}} routers.
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer}}
==Overview==
The Overview page contains <b>widgets</b> that display the status of various systems related to the device. The figure bellow is an example of the Overview page:
{{#switch: {{{series}}}
|
RUTX=
{{#switch: {{{name}}}
|
RUTX08 = [[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
RUTX10 = [[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
RUTX09 = [[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
|
RUTX11 = [[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
|
RUTX12 = [[File:Networking_rutx12_manual_overview_v2.png]]
|
RUTXR1 =[[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
}}
|
TRB2=[[File:Networking_trb1_manual_overview_v2.png]]
|
TRB1=[[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
}}
{{#switch: {{{series}}}
|
RUTX=
{{#ifeq: {{{mobile}}} |1|
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -82</td>
</tr>
<tr>
<td>3</td>
<td>-81 to -67</td>
</tr>
<tr>
<td>4</td>
<td>-66 to -52</td>
</tr>
<tr>
<td>5</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
}}
|
TRB2=
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -82</td>
</tr>
<tr>
<td>3</td>
<td>-81 to -67</td>
</tr>
<tr>
<td>4</td>
<td>-66 to -52</td>
</tr>
<tr>
<td>5</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
|
TRB1=
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -52</td>
</tr>
<tr>
<td>3</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
|
}}
===Widget button: Info===
----
The <b>Info</b> ([[File:Trb14x_webui_status_overview_widget_button_info_icon_v2.png]]) button is located next to the name of some widgets. Clicking the Info button redirects the user to a status page related to the widget's displayed information. For example, clicking the Info button on the Mobile widget would redirect the user to the <b>Status → [[{{{name}}} System|System]] </b> page:
[[File:Networking_rutx11_manual_overview_widget_button_info_action_v1.png]]
<!---------------------------Widget button: Info--------------------------->
{{Template: Networking_device_manual_overview_widget_button_info
| name = {{{name}}}
| file_button_info = {{{file_button_info}}}
| file_button_info_action = {{{file_button_info_action}}}
}}
<!-------------------------Widget button: Settings------------------------->
<!--{{Template: Networking device manual overview widget button settings
| name = {{{name}}}
| file_button_settings = {{{file_button_settings}}}
| file_button_settings_action = {{{file_button_settings_action}}}
}}-->
<!---------------------------Widget button: Wiki--------------------------->
<!--{{Template: Networking device manual overview widget button wiki
| name = {{{name}}}
| file_button_wiki = {{{file_button_wiki}}}
| file_button_wiki_action = {{{file_button_wiki_action}}}
}}-->
<!--
===Adding more widgets===
----
There is a default set of widgets displayed in the Overview page, but more can be added from the <b>System → Administration → [[{{{name}}} Administration#Overview|Overview]]</b> page.
-->
[[Category:{{{name}}} Status section]]
| fw_version = {{{series}}}_R_00.02.03
| series = {{{series}}}
}}
__TOC__
==Summary==
The <b>Overview</b> page contains various information summaries and shortcuts to other pages. It is also the homepage of the WebUI. This chapter is an overview of the Overview page for {{{name}}} routers.
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer}}
==Overview==
The Overview page contains <b>widgets</b> that display the status of various systems related to the device. The figure bellow is an example of the Overview page:
{{#switch: {{{series}}}
|
RUTX=
{{#switch: {{{name}}}
|
RUTX08 = [[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
RUTX10 = [[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
RUTX09 = [[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
|
RUTX11 = [[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
|
RUTX12 = [[File:Networking_rutx12_manual_overview_v2.png]]
|
RUTXR1 =[[File:Networking_rutx09_rutx11_manual_overview_v2.png]]
}}
|
TRB2=[[File:Networking_trb1_manual_overview_v2.png]]
|
TRB1=[[File:Networking_rutx08_rutx10_manual_overview_v2.png]]
|
}}
{{#switch: {{{series}}}
|
RUTX=
{{#ifeq: {{{mobile}}} |1|
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -82</td>
</tr>
<tr>
<td>3</td>
<td>-81 to -67</td>
</tr>
<tr>
<td>4</td>
<td>-66 to -52</td>
</tr>
<tr>
<td>5</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
}}
|
TRB2=
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -82</td>
</tr>
<tr>
<td>3</td>
<td>-81 to -67</td>
</tr>
<tr>
<td>4</td>
<td>-66 to -52</td>
</tr>
<tr>
<td>5</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
|
TRB1=
===Mobile widget===
----
The <b>Mobile</b> widget displays information related to the mobile connection and the current <b>signal strength</b> ([[File:Networking_rutx_trb14x_status_overview_widget_mobile_signal_strength_indicator_v1.png]]). Each filled-up bar represents a different RSSI value:
<table class="nd-othertables">
<tr>
<th style="width: 100px">bars</th>
<th style="width: 300px">signal strength value / RSSI (in dBm)</th>
</tr>
<tr>
<td>0</td>
<td>≤ -111</td>
</tr>
<tr>
<td>1</td>
<td>-110 to -97</td>
</tr>
<tr>
<td>2</td>
<td>-96 to -52</td>
</tr>
<tr>
<td>3</td>
<td>≥ -51</td>
</tr>
</table>
The same calculation principle applies to the <b>Signal strength LEDs</b> located on your device. You can find more information on signal strength values and different measurements <b>[[Mobile Signal Strength Recommendations|here]]</b>.
|
}}
===Widget button: Info===
----
The <b>Info</b> ([[File:Trb14x_webui_status_overview_widget_button_info_icon_v2.png]]) button is located next to the name of some widgets. Clicking the Info button redirects the user to a status page related to the widget's displayed information. For example, clicking the Info button on the Mobile widget would redirect the user to the <b>Status → [[{{{name}}} System|System]] </b> page:
[[File:Networking_rutx11_manual_overview_widget_button_info_action_v1.png]]
<!---------------------------Widget button: Info--------------------------->
{{Template: Networking_device_manual_overview_widget_button_info
| name = {{{name}}}
| file_button_info = {{{file_button_info}}}
| file_button_info_action = {{{file_button_info_action}}}
}}
<!-------------------------Widget button: Settings------------------------->
<!--{{Template: Networking device manual overview widget button settings
| name = {{{name}}}
| file_button_settings = {{{file_button_settings}}}
| file_button_settings_action = {{{file_button_settings_action}}}
}}-->
<!---------------------------Widget button: Wiki--------------------------->
<!--{{Template: Networking device manual overview widget button wiki
| name = {{{name}}}
| file_button_wiki = {{{file_button_wiki}}}
| file_button_wiki_action = {{{file_button_wiki_action}}}
}}-->
<!--
===Adding more widgets===
----
There is a default set of widgets displayed in the Overview page, but more can be added from the <b>System → Administration → [[{{{name}}} Administration#Overview|Overview]]</b> page.
-->
[[Category:{{{name}}} Status section]]
