0
edits
Changes
Template:Networking rutos manual snmp (view source)
Revision as of 07:49, 13 May 2020
, 07:49, 13 May 2020change color desc
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">Authentication type</span></td>
<td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication type</td>
<td>SHA | MD5; default: '''SHA'''</td>
<td>SHA | MD5; default: '''SHA'''</td>
<td>Set authentication type to use with SNMP v3.</td>
<td>Set authentication type to use with SNMP v3.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">Authentication passphrase</span></td>
<td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication passphrase</td>
<td>string; default: '''none'''</td>
<td>string; default: '''none'''</td>
<td>Set authentication passpharse to generate key for SNMP v3.</td>
<td>Set authentication passpharse to generate key for SNMP v3.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:red">Privacy type</span></td>
<td><span style="color:red">Authentication and privacy:</span> Privacy type</td>
<td>DES | AES; default: '''DES'''</td>
<td>DES | AES; default: '''DES'''</td>
<td>Set privacy type to use with SNMP v3.</td>
<td>Set privacy type to use with SNMP v3.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:red">Privacy passphrase</span></td>
<td><span style="color:red">Authentication and privacy:</span> Privacy passphrase</td>
<td>string; default: '''none'''</td>
<td>string; default: '''none'''</td>
<td>Set privacy passpharse to generate key for SNMP v3.</td>
<td>Set privacy passpharse to generate key for SNMP v3.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">Input/Output name</span></td>
<td><span style="color:blue">Input/Output:</span> Input/Output name</td>
<td>Configurable Input/Output([2..4]); default: <b>Configurable Input/Output(2)</b></td>
<td>Configurable Input/Output([2..4]); default: <b>Configurable Input/Output(2)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">State change</span></td>
<td><span style="color:blue">Input/Output:</span> State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:red">Input/Output name</span></td>
<td><span style="color:red">ADC:</span> Input/Output name</td>
<td>ADC; default: <b>ADC</b></td>
<td>ADC; default: <b>ADC</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:red">Voltage</span></td>
<td><span style="color:red">ADC:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">Input/Output name</span></td>
<td><span style="color:blue">Input/Output:</span> Input/Output name</td>
<td>Configurable Input/Output(3) {{!}} Configurable Input/Output(4); default: <b>Configurable Input/Output(3)</b></td>
<td>Configurable Input/Output(3) {{!}} Configurable Input/Output(4); default: <b>Configurable Input/Output(3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:blue">State change</span></td>
<td><span style="color:blue">Input/Output:</span> State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:dodgerblue">Input/Output name</span></td>
<td><span style="color:dodgerblue">Wet/Dry Input:</span> Input/Output name</td>
<td>Wet/Dry Input(1) {{!}} Wet/Dry Input(2); default: <b>Wet/Dry Input(1)</b></td>
<td>Wet/Dry Input(1) {{!}} Wet/Dry Input(2); default: <b>Wet/Dry Input(1)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:dodgerblue">State change</span></td>
<td><span style="color:dodgerblue">Wet/Dry Input:</span> State change</td>
<td>Rising {{!}} Falling {{!}} Both; default: <b>Rising</b></td>
<td>Rising {{!}} Falling {{!}} Both; default: <b>Rising</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:forestgreen">Input/Output name</span></td>
<td><span style="color:forestgreen">Relay:</span> Input/Output name</td>
<td>Relay(3,4,5) {{!}} Latching relay(11,12,13); default: <b>Relay(3,4,5)</b></td>
<td>Relay(3,4,5) {{!}} Latching relay(11,12,13); default: <b>Relay(3,4,5)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:forestgreen">State change</span></td>
<td><span style="color:forestgreen">Relay:</span> State change</td>
<td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td>
<td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:darkred">Input/Output name</span></td>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Input/Output name</td>
<td>4–20 mA Current Loop; default: <b>4–20 mA Current Loop</b></td>
<td>4–20 mA Current Loop; default: <b>4–20 mA Current Loop</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:darkred">Voltage</span></td>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:chocolate">Input/Output name</span></td>
<td><span style="color:chocolate">ADC:</span> Input/Output name</td>
<td>ADC; default: <b>ADC</b></td>
<td>ADC; default: <b>ADC</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color:chocolate">Voltage</span></td>
<td><span style="color:chocolate">ADC:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
<td>At which voltage value will this rule be triggered.</td>
</table>
</table>
<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
== SNMP Variables list ==
== SNMP Variables list ==
