Changes

Now apply the following configuration:

Now apply the following configuration:

[[File:Networking_rutos_configuration_example_ddns_configuration_noip_v1.png|1100px|border|class=tlt-border]]

[[File:Networking_rutos_configuration_example_ddns_configuration_dynu_v1.png|1100px|border|class=tlt-border]]

# Check the '''Enable''' box.

# Check the '''Enable''' box.

# Type your '''Lookup hostname'''.

# Type your '''Lookup hostname'''.

# Select '''DDNS Service provider: no-ip.com'''

# Select '''DDNS Service provider: no-ip.com'''

# Type your '''noip''' '''Domain'''.

# Type your '''Dynu''' '''Domain'''.

# Type your '''noip''' '''Username'''.

# Type your '''Dynu''' '''Username'''.

# Type your '''noip''' '''Password'''.

# Type your '''Dynu''' '''Password'''.

# Set '''IP address source''' to '''Public'''.

# Set '''IP address source''' to '''Public'''.

# Click '''Save & Apply''' button.

# Click '''Save & Apply''' button.

Wait for about '''5''' minutes from the time you saved the changes. In the '''Status''' column, you should see the last time the DDNS was updated and whether the service is running. (If it does not change for a while, try changing the '''Check''' and '''Force intervals''' in DDNS settings, or reboot your {{{device}}}).

Wait for about '''5''' minutes from the time you saved the changes. In the '''Status''' column, you should see the last time the DDNS was updated and whether the service is running. (If it does not change for a while, try changing the '''Check''' and '''Force intervals''' in DDNS settings, or reboot your {{{device}}}).

[[File:Networking rutos configuration example ddns configuration dynu test 1 v1.png|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns configuration dynu test 1 v1.png|1100px|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns configuration noip test 1 v2.png|1100px|]]

==Results==

==Results==