Changes
Running version RUT9XX_R_00.06.09. Without these option the new WAN doesn't show in the WAN area. These entries taken from other default interfaces.
<!--<font size="-1"><i>Last edit was on <u>{{REVISIONMONTH}}/{{REVISIONDAY}}/{{REVISIONYEAR}}</u></i></font>-->
==Introduction==
==Introduction==
After clicking '''Open''' you will need to enter router credentials.
After clicking '''Open''' you will need to enter router credentials.
<li>Login as: '''root'''</li>
<li>Login as: '''root'''</li>
<li>Password: routers admin password (by default admin01)</li>
<li>Password: routers admin password (by default admin01)</li>
[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_9_v1.png]]<br><br>
[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_9_v1.png]]<br><br>
Now when you are connected you will need to make changes to network settings, this will be achieved via SSH command: '''vi''', which allows you to edit settings in the router. Enter following command in SSH:
Now when you are connected you will need to make changes to network settings, this will be achieved via SSH command: '''vi''', which allows you to edit settings in the router. Enter following command in SSH:
<ul>
<pre>vi /etc/config/network</pre>
Then press the 'I' button on your keyboard to enable editing.
===Using DHCP===
===Using DHCP===
<li><i>option ifname 'eth0.1'</i></li>
<li><i>option ifname 'eth0.1'</i></li>
<li><i>option backup '1'</i></li>
<li><i>option backup '1'</i></li>
<li><i>option metric '10'</i><br>[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_4_v1.png]]</li>
<li><i>option metric '10'</i></li>
<li>option enabled '1'
</li>
<li>option disabled '0'<br>
</li>
<li>[[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_4_v1.png]]
</li>
<li>Press the <b>Escape (E<small>SC</small>)</b> button on your keyboard; type <b><i>:wq</i></b> and press <b>Enter</b> to close the editor and save the changes.</li>
<li>Press the <b>Escape (E<small>SC</small>)</b> button on your keyboard; type <b><i>:wq</i></b> and press <b>Enter</b> to close the editor and save the changes.</li>
<li>Restart the network service on the router in order to apply the changes by executing this command:<br><pre>/etc/init.d/network restart</pre></li>
<li>Restart the network service on the router in order to apply the changes by executing this command:<br><pre>/etc/init.d/network restart</pre></li>
</ul>
</ul>
[[Category:-Network Control]] [[Category:RUT955 Config Examples]] [[Category:RUT950 Config Examples]] [[Category:RUT900 Config Examples]] [[Category:RUT240 Config Examples]] [[Category:RUT230 Config Examples]]