0
edits
Changes
Template:Networking rutos configuration example openvpn bridge wifi ap use case (view source)
Revision as of 17:44, 14 July 2020
, 17:44, 14 July 2020→Creating a new WiFi AP
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Now go to '''Network → Interfaces''' and press '''Edit''' next to your newly created LAN interface:
</td>
</td>
</tr>
</tr>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Apply the following steps:
<ol>
<ol>
<li>Enter username '''''root''''' .</li>
<li>Set '''Protocol''' to '''Static'''.</li>
<li>Write the '''Password''' of your router.</li>
<li>Press '''Switch Protocol''' and then more configuration options will appear.</li>
</ol>
</ol>
</td>
</td>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Now apply the following configuration:
<ol>
<ol>
<li>Enter username '''''root''''' .</li>
<li>Set '''IPv4 Address''' to '''192.168.5.1'''.</li>
<li>Write the '''Password''' of your router.</li>
<li>Select '''IPv4 netmask: 255.255.255.0'''.</li>
<li>Press '''Setup DHCP Server''', after that more configuration options will appear, but you can leave those as default or change it to your own liking.</li>
<li>'''Save''' the changes.</li>
</ol>
</ol>
</td>
</td>
