Changes

When Load Balancing is selected, you can <b>assign ratio values</b> to WAN interfaces. The ratio value represents a percentage of traffic load that will go through an interface. For example, if you set it up like this:

When Load Balancing is selected, you can <b>assign ratio values</b> to WAN interfaces. The ratio value represents a percentage of traffic load that will go through an interface. For example, if you set it up like this:

<ul>

<table>

     <li><table cellspacing="0" cellpadding="0"%><tr><td style="text-align: left; width: 150px;"><i>Wired WAN Ratio:</i></td><td style="text-align: right; width: 30px;"><b>3</b></tr></table></li>

     <tr>

     <li><table cellspacing="0" cellpadding="0"%><tr><td style="text-align: left; width: 150px;"><i>{{{wan2}}} Ratio:</i></td><td style="text-align: right; width: 30px;"><b>2</b></tr></table></li>

        <td style="text-align: left; width: 150px;"><li><i>Wired WAN Ratio:</i></li></td>

</ul>

        <td style="text-align: right; width: 30px;"><b>3</b>

    </tr>

</table>

<table>

     <tr>

        <td style="text-align: left; width: 150px;"><li><i>{{{wan2}}} Ratio:</i></li></td>

        <td style="text-align: right; width: 30px;"><b>2</b></td>

    </tr>

</table>

then about 60 % (3/5) of traffic would go through the Wired WAN interface and about 40 % (2/5) would go through {{{wan2}}}. In this case if you played 100 different videos on the Internet, about 60 would be downloaded through Wired WAN and the other 40 would be downloaded via {{{wan}}}.

then about 60 % (3/5) of traffic would go through the Wired WAN interface and about 40 % (2/5) would go through {{{wan2}}}. In this case if you played 100 different videos on the Internet, about 60 would be downloaded through Wired WAN and the other 40 would be downloaded via {{{wan}}}.

[[Category:{{{name}}} Network section]]

[[Category:{{{name}}} Network section]]