31,703
edits
Changes
Template:Networking rutos manual traffic logging (view source)
Revision as of 09:44, 24 August 2020
, 09:44, 24 August 2020no edit summary
<!-- Template uses {{{name}}}, {{{series}}}, -->
<!-- Template uses {{{name}}}, {{{series}}}, -->
{{Template:Networking_rutos_manual_fw_disclosure
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.04.1
| fw_version = {{{series}}}_R_00.02.05
| series = {{{series}}}
| series = {{{series}}}
}}
}}
==Summary==
==Summary==
The <b>Traffic Logging</b> page provides the possibility to set up a periodic transfers of the WiFi traffic log to an FTP server.
The <b>Traffic Logging</b> page provides the possibility to set up a periodic transfers of the selected traffic log to an FTP server.
This manual page provides an overview of the Traffic Logging page in {{{name}}} routers.
This manual page provides an overview of the Traffic Logging page in {{{name}}} devices.
==Traffic Logging Settings==
==Traffic Logging Settings==
The <b>Traffic Logging Settings</b> section is used enable or disable traffic log data sending.
The <b>Traffic Logging Settings</b> section is used enable or disable traffic log data sending.
[[File:Networking_rutx_manual_traffic_logging_traffic_logging_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_traffic_logging_traffic_logging_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Turns Traffic Logging on or off.</td>
</tr>
<tr>
<td>Networks</td>
<td>network(s); default: <b>none</b></td>
<td>Selects from which networks traffic logging data will be taken.</td>
</tr>
</table>
==FTP Settings==
==FTP Settings==
===FTP Server===
===FTP Server===
----
----
The <b>FTP Server</b> section is used to configure the parameters required to login to an FTP server to which the traffic log data will be sent. Below is an example of the FTP Server section:
The <b>FTP Server</b> section is used to configure the parameters required to login to an FTP server to which the traffic log data will be sent. Below is an example of the FTP Server section.
[[File:Networking_rutx_manual_traffic_logging_ftp_settings_ftp_server_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_traffic_logging_ftp_settings_ftp_server.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
The <b>Upload Settings</b> section is used to configure how often the data should be sent to an FTP server. Below is an example of the FTP Server section:
The <b>Upload Settings</b> section is used to configure how often the data should be sent to an FTP server. Below is an example of the FTP Server section:
[[File:Networking_rutx_manual_traffic_logging_ftp_settings_upload_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_traffic_logging_ftp_settings_upload_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>Upload mode.<br>
<td>Upload mode.<br>
<ul>
<ul>
<li><b>Interval</b> - sends data at specified frequency (for example, every 1 hour);</li>
<li><b>Interval</b> - sends data at a specified frequency (for example, every 1 hour);</li>
<li><b>Fixed</b> - sends data at a specified time (for example, at 2:25 a.m.)</li>
<li><b>Fixed</b> - sends data at a specified time of day (for example, at 2:25 a.m.)</li>
</ul>
</ul>
</td>
</td>
<td>Upload interval</td>
<td>Upload interval</td>
<td>1 hour | 2 hours | 4 hours | 8 hours | 12 hours | 24 hours; default: <b>1 hour</b></td>
<td>1 hour | 2 hours | 4 hours | 8 hours | 12 hours | 24 hours; default: <b>1 hour</b></td>
<td>Specifies upload frequency in hours.</td>
<td>Data upload frequency in hours.</td>
</tr>
</tr>
<tr>
<tr>
