31,703
edits
Changes
Template:Networking rutos manual hotspot 2.0 (view source)
Revision as of 15:57, 26 August 2020
, 15:57, 26 August 2020Created page with "<span style="color: red;><b>Note:</b> <u>this page is not yet finished.</u></span> ---- {{Template:Networking_rutos_manual_fw_disclosure | fw_version = {{{series}}}_R_00.02.05..."
<span style="color: red;><b>Note:</b> <u>this page is not yet finished.</u></span>
----
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| series = {{{series}}}
}}
==Summary==
<b>Hotspot 2.0</b> is a wireless network standard designed to make it easier and more secure to connect to public WiFi hotspots. This chapter is an overview of the Hotspot 2.0 section for {{{name}}} devices.
==Hotspot 2.0==
The <b>Hotspot 2.0</b> displays available WiFi interfaces. In order to begin configuring an interface click the 'Edit' button next to it:
[[File:Networking_rutos_manual_hotspot_2.0_interfaces_edit_button_wifi_{{{wifi}}}.png|border|class=tlt-border]]
After this you should be redirected to the configuration page for that interface.
===Hotspot 2.0 Configuration===
====General Setup====
----
[[File:Networking_rutos_manual_hotspot_2.0_general_setup.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Turns Hotspot 2.0 for this interface on or off.</td>
</tr>
<tr>
<td>Internet access</td>
<td>off | on; default: <b>off</b></td>
<td>Is used to inform the client device whether internet access is available.</td>
</tr>
<tr>
<td>Access Network Type</td>
<td>Private network | Private network with guest access | Chargeable public network | Free public network | Personal device network | Emergency services only network | Test or experimental; default: <b></b></td>
<td>The access network type present in beacon and probe response frames. Mobile devices can use this information when selecting a hotspot.</td>
</tr>
<tr>
<td>HESSID</td>
<td>mac; default: <b>none</b></td>
<td>Homogeneous ESS identifier (optional). This shall be identical to one of the BSSIDs in the homogeneous ESS.</td>
</tr>
<tr>
<td>Roaming consortium OI</td>
<td>3 or 5 octet hexstring; default: <b>none</b></td>
<td>Only first three entries are available through Beacon and Probe Response frames.</td>
</tr>
<tr>
<td>Network authentication type</td>
<td>Not configured | Acceptance of terms and conditions | On-line enrollment supported | http/https redirection | DNS redirection; default: <b>Not configured</b></td>
<td>Type of authentication used on this network.</td>
</tr>
<tr>
<td>IP Address type availability</td>
<td>Address type not available | Public IPv1 address available | Port restricted IPv4 address available | Single NATed IPv4 address available | Double NATed IPv4 address available | Port restricted IPv4 address and single NATed IPv4 address available | Port restricted IPv4 address and double NATed IPv4 address available | Availability of the address type is not known; default: <b>Availability of the address type is not known</b></td>
<td>Provides information about the IP address version and type that would be available to a mobile device after it authenticates to the network.</td>
</tr>
<tr>
<td>Domain name</td>
<td>domain name; default: <b>none</b></td>
<td>The Domain Name ANQP-element provides a list of one or more domain names of the entity operating the hotspot network.</td>
</tr>
<tr>
<td>Venue group</td>
<td>various; default: <b>Unspecified</b></td>
<td>Describes the venue in which the hotspot is located.</td>
</tr>
<tr>
<td>Venue type</td>
<td>various; default: <b></b></td>
<td>Describes the venue in which the hotspot is located.</td>
</tr>
</table>
====OSU Provider====
----
[[File:Networking_rutos_manual_hotspot_2.0_osu_provider.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>OSU ssid</td>
<td>string; default: <b>none</b></td>
<td>Informs client devices about the SSID used for OSU connections.</td>
</tr>
<tr>
<td>OSU server URL</td>
<td>url; default: <b>none</b></td>
<td>Is used to inform the client device whether internet access is available.</td>
</tr>
<tr>
<td>Name language code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639)/</td>
</tr>
<tr>
<td>OSU friendly name</td>
<td>string; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>OSU NAI</td>
<td>string; default: <b>none</b></td>
<td>OSU network access identifier.</td>
</tr>
<tr>
<td>OSU method list</td>
<td>OMA-DM | SOAP-XML; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>Description language code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Description</td>
<td>string; default: <b>none</b></td>
<td>OSU service description.</td>
</tr>
</table>
====WAN Metrics====
----
[[File:Networking_rutos_manual_hotspot_2.0_wan_metrics.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Link Status</td>
<td>Link up | Link Down; default: <b>Link up</b></td>
<td>Provides information about the WAN link that connects the hotspot to the Internet.</td>
</tr>
<tr>
<td>Downlink Speed</td>
<td>integer [1..4294967295]; default: <b>none</b></td>
<td>Maximum downlink speed in Kbps.</td>
</tr>
<tr>
<td>Uplink Speed</td>
<td>integer [1..4294967295]; default: <b>none</b></td>
<td>Maximum uplink speed in Kbps.</td>
</tr>
</table>
===Venue Name Information===
----
The <b>Venue Name Information</b> is used to configure one or more Venue Name values for Venue Name ANQP information. To add a new Venue configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Venue Name Information list.
[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Language Code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Venue Name</td>
<td>string; default: <b>none</b></td>
<td>Name of this venue.</td>
</tr>
<tr>
<td>Venue URL Information</td>
<td>url; default: <b>none</b></td>
<td>Venue URL to provide additional information corresponding to Venue Name information (<u>the URL should contain protocol</u>).</td>
</tr>
</table>
===3GPP Cellular Network Information===
----
The <b>3GPP Cellular Network Information</b> section is used to uniquely identify mobile network operators. To add a new mobile operator instance, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the 3GPP Cellular Network Information list.
[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Mobile Country Code</td>
<td>integer; default: <b></b></td>
<td>Mobile country code (3 decimal digits).</td>
</tr>
<tr>
<td>Mobile Network Code</td>
<td>integer; default: <b>none</b></td>
<td>Mobile network code (2 or 3 decimal digits).</td>
</tr>
</table>
===Network Access Identifier (NAI) Realm Information===
----
The <b>Network Access Identifier (NAI) Realm Information</b> parameters provide information for stations using interworking network selection to allow automatic connection to a network based on credentials. To add a new NAI Realm Information configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Network Access Identifier (NAI) Realm Information list.
[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>NAI Realm</td>
<td>url; default: <b>Link up</b></td>
<td>The NAI Realm provides a list of NAI realms corresponding to the Home SPs that can authenticate a client device.</td>
</tr>
<tr>
<td>EAP Method</td>
<td>EAP-TLS | EAP-TTLS | PEAP | EAP-FAST; default: <b>Undefined</b></td>
<td>Identifies the EAP method supported by that NAI realm for authentication.</td>
</tr>
<tr>
<td>Authentication Parameter</td>
<td>Undefined | Non EAP PAP | Non EAP CHAP | Non EAP MSCHAP | Non EAP MSCHAPV2 | Credential certificate | Credential username/password; default: <b>Undefined</b></td>
<td>EAP method authentication parameter.</td>
</tr>
</table>
===Operator Friendly Name===
----
The client device may obtain the <b>Operator Friendly Name</b> via GAS/ANQP queries to assist the user during manual hotspot selection. To add a new Operator Friendly Name configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Operator Friendly Name list.
[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Language Code</td>
<td>string; default: <b>Link up</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Operator's Name</td>
<td>string; default: <b>none</b></td>
<td>Provides a friendly name for the Hotspot Operator.</td>
</tr>
</table>
===Connection Capability===
----
The <b>Connection Capability</b> section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_operator_connection_capability_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Connection Capability list.
[[File:Networking_rutos_manual_hotspot_2.0_connection_capability.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Protocol</td>
<td>ICMP | TCP | UDP; default: <b>ICMP</b></td>
<td>.</td>
</tr>
<tr>
<td>Port Number</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>Status</td>
<td>Closed | Open | Unknown; default: <b>Closed</b></td>
<td>.</td>
</tr>
</table>
[[Category:{{{name}}} Services section]]
----
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| series = {{{series}}}
}}
==Summary==
<b>Hotspot 2.0</b> is a wireless network standard designed to make it easier and more secure to connect to public WiFi hotspots. This chapter is an overview of the Hotspot 2.0 section for {{{name}}} devices.
==Hotspot 2.0==
The <b>Hotspot 2.0</b> displays available WiFi interfaces. In order to begin configuring an interface click the 'Edit' button next to it:
[[File:Networking_rutos_manual_hotspot_2.0_interfaces_edit_button_wifi_{{{wifi}}}.png|border|class=tlt-border]]
After this you should be redirected to the configuration page for that interface.
===Hotspot 2.0 Configuration===
====General Setup====
----
[[File:Networking_rutos_manual_hotspot_2.0_general_setup.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Turns Hotspot 2.0 for this interface on or off.</td>
</tr>
<tr>
<td>Internet access</td>
<td>off | on; default: <b>off</b></td>
<td>Is used to inform the client device whether internet access is available.</td>
</tr>
<tr>
<td>Access Network Type</td>
<td>Private network | Private network with guest access | Chargeable public network | Free public network | Personal device network | Emergency services only network | Test or experimental; default: <b></b></td>
<td>The access network type present in beacon and probe response frames. Mobile devices can use this information when selecting a hotspot.</td>
</tr>
<tr>
<td>HESSID</td>
<td>mac; default: <b>none</b></td>
<td>Homogeneous ESS identifier (optional). This shall be identical to one of the BSSIDs in the homogeneous ESS.</td>
</tr>
<tr>
<td>Roaming consortium OI</td>
<td>3 or 5 octet hexstring; default: <b>none</b></td>
<td>Only first three entries are available through Beacon and Probe Response frames.</td>
</tr>
<tr>
<td>Network authentication type</td>
<td>Not configured | Acceptance of terms and conditions | On-line enrollment supported | http/https redirection | DNS redirection; default: <b>Not configured</b></td>
<td>Type of authentication used on this network.</td>
</tr>
<tr>
<td>IP Address type availability</td>
<td>Address type not available | Public IPv1 address available | Port restricted IPv4 address available | Single NATed IPv4 address available | Double NATed IPv4 address available | Port restricted IPv4 address and single NATed IPv4 address available | Port restricted IPv4 address and double NATed IPv4 address available | Availability of the address type is not known; default: <b>Availability of the address type is not known</b></td>
<td>Provides information about the IP address version and type that would be available to a mobile device after it authenticates to the network.</td>
</tr>
<tr>
<td>Domain name</td>
<td>domain name; default: <b>none</b></td>
<td>The Domain Name ANQP-element provides a list of one or more domain names of the entity operating the hotspot network.</td>
</tr>
<tr>
<td>Venue group</td>
<td>various; default: <b>Unspecified</b></td>
<td>Describes the venue in which the hotspot is located.</td>
</tr>
<tr>
<td>Venue type</td>
<td>various; default: <b></b></td>
<td>Describes the venue in which the hotspot is located.</td>
</tr>
</table>
====OSU Provider====
----
[[File:Networking_rutos_manual_hotspot_2.0_osu_provider.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>OSU ssid</td>
<td>string; default: <b>none</b></td>
<td>Informs client devices about the SSID used for OSU connections.</td>
</tr>
<tr>
<td>OSU server URL</td>
<td>url; default: <b>none</b></td>
<td>Is used to inform the client device whether internet access is available.</td>
</tr>
<tr>
<td>Name language code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639)/</td>
</tr>
<tr>
<td>OSU friendly name</td>
<td>string; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>OSU NAI</td>
<td>string; default: <b>none</b></td>
<td>OSU network access identifier.</td>
</tr>
<tr>
<td>OSU method list</td>
<td>OMA-DM | SOAP-XML; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>Description language code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Description</td>
<td>string; default: <b>none</b></td>
<td>OSU service description.</td>
</tr>
</table>
====WAN Metrics====
----
[[File:Networking_rutos_manual_hotspot_2.0_wan_metrics.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Link Status</td>
<td>Link up | Link Down; default: <b>Link up</b></td>
<td>Provides information about the WAN link that connects the hotspot to the Internet.</td>
</tr>
<tr>
<td>Downlink Speed</td>
<td>integer [1..4294967295]; default: <b>none</b></td>
<td>Maximum downlink speed in Kbps.</td>
</tr>
<tr>
<td>Uplink Speed</td>
<td>integer [1..4294967295]; default: <b>none</b></td>
<td>Maximum uplink speed in Kbps.</td>
</tr>
</table>
===Venue Name Information===
----
The <b>Venue Name Information</b> is used to configure one or more Venue Name values for Venue Name ANQP information. To add a new Venue configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Venue Name Information list.
[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Language Code</td>
<td>string; default: <b>none</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Venue Name</td>
<td>string; default: <b>none</b></td>
<td>Name of this venue.</td>
</tr>
<tr>
<td>Venue URL Information</td>
<td>url; default: <b>none</b></td>
<td>Venue URL to provide additional information corresponding to Venue Name information (<u>the URL should contain protocol</u>).</td>
</tr>
</table>
===3GPP Cellular Network Information===
----
The <b>3GPP Cellular Network Information</b> section is used to uniquely identify mobile network operators. To add a new mobile operator instance, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the 3GPP Cellular Network Information list.
[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Mobile Country Code</td>
<td>integer; default: <b></b></td>
<td>Mobile country code (3 decimal digits).</td>
</tr>
<tr>
<td>Mobile Network Code</td>
<td>integer; default: <b>none</b></td>
<td>Mobile network code (2 or 3 decimal digits).</td>
</tr>
</table>
===Network Access Identifier (NAI) Realm Information===
----
The <b>Network Access Identifier (NAI) Realm Information</b> parameters provide information for stations using interworking network selection to allow automatic connection to a network based on credentials. To add a new NAI Realm Information configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Network Access Identifier (NAI) Realm Information list.
[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>NAI Realm</td>
<td>url; default: <b>Link up</b></td>
<td>The NAI Realm provides a list of NAI realms corresponding to the Home SPs that can authenticate a client device.</td>
</tr>
<tr>
<td>EAP Method</td>
<td>EAP-TLS | EAP-TTLS | PEAP | EAP-FAST; default: <b>Undefined</b></td>
<td>Identifies the EAP method supported by that NAI realm for authentication.</td>
</tr>
<tr>
<td>Authentication Parameter</td>
<td>Undefined | Non EAP PAP | Non EAP CHAP | Non EAP MSCHAP | Non EAP MSCHAPV2 | Credential certificate | Credential username/password; default: <b>Undefined</b></td>
<td>EAP method authentication parameter.</td>
</tr>
</table>
===Operator Friendly Name===
----
The client device may obtain the <b>Operator Friendly Name</b> via GAS/ANQP queries to assist the user during manual hotspot selection. To add a new Operator Friendly Name configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Operator Friendly Name list.
[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Language Code</td>
<td>string; default: <b>Link up</b></td>
<td>Two or three character language code (ISO-639).</td>
</tr>
<tr>
<td>Operator's Name</td>
<td>string; default: <b>none</b></td>
<td>Provides a friendly name for the Hotspot Operator.</td>
</tr>
</table>
===Connection Capability===
----
The <b>Connection Capability</b> section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_operator_connection_capability_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Connection Capability list.
[[File:Networking_rutos_manual_hotspot_2.0_connection_capability.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Protocol</td>
<td>ICMP | TCP | UDP; default: <b>ICMP</b></td>
<td>.</td>
</tr>
<tr>
<td>Port Number</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>.</td>
</tr>
<tr>
<td>Status</td>
<td>Closed | Open | Unknown; default: <b>Closed</b></td>
<td>.</td>
</tr>
</table>
[[Category:{{{name}}} Services section]]
