Line 1: |
Line 1: |
| {{Template:Networking_rutos_manual_fw_disclosure | | {{Template:Networking_rutos_manual_fw_disclosure |
− | | fw_version = {{{series}}}_R_00.02.04.1 | + | | fw_version = {{{series}}}_R_00.02.05 |
| | series = {{{series}}} | | | series = {{{series}}} |
| }} | | }} |
Line 143: |
Line 143: |
| <b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux. | | <b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux. |
| | | |
− | [[File:Networking_rutos_manual_usb_tools_usb_to_serial_console_v1.png|border|class=tlt-border]] | + | [[File:Networking_rutos_manual_usb_tools_printer_server_usb_to_serial_console.png|border|class=tlt-border]] |
| | | |
| ===Over IP=== | | ===Over IP=== |
Line 149: |
Line 149: |
| The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network. | | The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network. |
| | | |
− | [[File:Networking_rutos_manual_usb_tools_usb_to_serial_over_ip_v1.png|border|class=tlt-border]] | + | [[File:Networking_rutos_manual_usb_tools_printer_server_usb_to_serial_over_ip.png|border|class=tlt-border]] |
| | | |
| <table class="nd-mantable"> | | <table class="nd-mantable"> |
Line 219: |
Line 219: |
| The <b>Modbus gateway</b> serial type allows redirecting TCP data coming to a specified port to an RTU specified by the Slave ID. The Slave ID can be specified by the user or be obtained directly from the Modbus header. | | The <b>Modbus gateway</b> serial type allows redirecting TCP data coming to a specified port to an RTU specified by the Slave ID. The Slave ID can be specified by the user or be obtained directly from the Modbus header. |
| | | |
− | [[File:Networking_rutos_manual_usb_tools_usb_to_serial_modbus_gateway_v1.png|border|class=tlt-border]] | + | [[File:Networking_rutos_manual_rs485_rs485_configuration_modbus_gateway.png|border|class=tlt-border]] |
| | | |
| <table class="nd-mantable"> | | <table class="nd-mantable"> |