Changes

       <td>Connection type</td>

       <td>Connection type</td>

       <td>QMI | PPP; default: <b>QMI</b></td>

       <td>QMI | PPP; default: <b>QMI</b></td>

       <td>How the router's modem will establish a connection to the carrier.

       <td>Defines how the modem will establish a connection to the ISP.

             <ul>

             <ul>

                 <li><b>PPP</b> - uses a dialling number to establish a data connection.</li>

                 <li><b>PPP</b> - uses a dialling number to establish a data connection.</li>

       <td>Mode</td>

       <td>Mode</td>

       <td>NAT | Bridge <span class="asterisk">*</span> | Passthrough<span class="asterisk">**</span>; default: <b>NAT</b></td>

       <td>NAT | Bridge <span class="asterisk">*</span> | Passthrough<span class="asterisk">**</span>; default: <b>NAT</b></td>

       <td>Mobile connection operating mode.

       <td>Mobile connection operation mode.

             <ul>

             <ul>

                 <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>

                 <li><b>NAT</b> - mobile connection uses NAT (network address translation). This is the default setting and is used for applications.</li>

                 <li><b>Bridge</b> - bridges the LTE data connection with LAN. In this mode the router relay the IP address received from the ISP to another LAN device (e.g., computer). Using Bridge mode will disable most of the router’s capabilities and you will only be able to access your router's WebUI with a [[Setting_up_a_Static_IP_address_on_a_Windows_10_PC|static IP configuration]].</li>

                 <li><b>Bridge</b> - bridges the LTE data connection with a device in LAN. In this mode the router relays the IP address received from the ISP to another LAN device (e.g., computer). Using Bridge mode will disable most of the router’s capabilities including DHCP and you will only be able to access the WebUI with a [[Setting_up_a_Static_IP_address_on_a_Windows_10_PC|static IP configuration]].</li>

                 <li><b>Passthrough</b> - works in a similar fashion to Bridge mode, except in Passthrough mode the router will have an Internet connection and be reachable from LAN, because the router's DHCP Server is not disabled.</li>

                 <li><b>Passthrough</b> - bridges the LTE data connection with a device in LAN. While in Passthrough mode the router will maintain an Internet connection and be accessible from LAN (DHCP Server is not disabled).</li>

             </ul>

             </ul>

         </td>

         </td>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>APN</td>

     <td>Auto APN</td>

    <td><span style="color: red;">Custom APN</span></td>

         <td>string; default: <b>none</b></td>

         <td>string; default: <b>none</b></td>

         <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:

         <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:

     </tr>

     </tr>

     <tr>

     <tr>

     <td>Auto APN</td>

     <td><span style="color: red;">Authentication method</span></td>

         <td>checkbox; default: <b>enabled</b></td>

         <td>CHAP | PAP | None; default: <b>None</b></td>

         <td>Auto APN scans an internal Android APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database.

         <td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>

        </td>

     </tr>

     </tr>

     <tr>

     <tr>

         <td>string; default: <b>none</b></td>

         <td>string; default: <b>none</b></td>

         <td>A 4-digit long numeric password used to authenticate the modem to the SIM card. <b>Reminder: Firstboot will not reset the PIN number, it must be changed manually</td>

         <td>A 4-digit long numeric password used to authenticate the modem to the SIM card. <b>Reminder: Firstboot will not reset the PIN number, it must be changed manually</td>

     </tr><tr><td>PUK number </td><td>string; default: <b>none</b></td><td>A 12-digit long numeric password used to reset a personal identification number (PIN) that has been lost or forgotten.</td></tr><tr>

     </tr>

    <tr>

        <td>PUK number</td>

        <td>string; default: <b>none</b></td>

        <td>A 12-digit long numeric password used to reset a personal identification number (PIN) that has been lost or forgotten.</td>

    </tr>

    <tr>

       <td>Dialing number</td>

       <td>Dialing number</td>

       <td>string; default: <b>none</b></td>

       <td>string; default: <b>none</b></td>

       <td>integer [0..1500]; default: <b>1500</b></td>

       <td>integer [0..1500]; default: <b>1500</b></td>

       <td>Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>

       <td>Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>

     </tr>

     </tr>

     <tr>

     <tr>

       <td>Service mode</td>

       <td>Service mode</td>

       <td>2G only | 3G only {{#ifeq:{{{3g}}}|0||4G (LTE) only| 2G + 3G | 2G + 4G | 3G + 4G|}} |  Automatic; default: <b>Automatic</b></td>

       <td>2G only | 3G only {{#ifeq:{{{3g}}}|0|{{!}} 4G (LTE) only|}} 2G + 3G {{#ifeq:{{{3g}}}|0| {{!}} 2G + 4G {{!}} 3G + 4G|}} |  Automatic; default: <b>Automatic</b></td>

       <td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity.</td>

       <td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity.</td>

     </tr>

     </tr>

The <b>mobile data on demand</b> function keeps the mobile data connection <i>on</i> only when it is in use. When the router detects that there is no traffic, it shuts down the mobile data connection and turns it back <i>on</i> only when there is a "Demand" (a user trying to reach a website, for example). Refer to the figure and table below for more information.

The <b>mobile data on demand</b> function keeps the mobile data connection <i>on</i> only when it is in use. When the router detects that there is no traffic, it shuts down the mobile data connection and turns it back <i>on</i> only when there is a "Demand" (a user trying to reach a website, for example). Refer to the figure and table below for more information.

[[File:{{{file_general_demand}}}]]

[[File:Networking_rut_manual_mobile_general_mobile_data_on_demand.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

     </tr>

     </tr>

</table>

</table>

{{#ifeq:{{{name}}}|RUT955|{{Template:Networking_rut9xx_manual_mobile_bands|file_general_bands={{{file_general_bands}}}|file_general_bands_modem={{{file_general_bands_modem}}}|name = RUT955}}|}}

 

{{#ifeq:{{{name}}}|RUT950|{{Template:Networking_rut9xx_manual_mobile_bands|file_general_bands={{{file_general_bands}}}|file_general_bands_modem={{{file_general_bands_modem}}}|name = RUT950}}|}}

{{#ifeq:{{{3g}}}|0|{{Template:Networking_rut9xx_manual_mobile_force_lte|file_general_force_lte={{{file_general_force_lte}}}}}|}}

 

 

[[File:Networking_rut_manual_mobile_general_network_frequency_bands_3g_{{{3g}}}_tdd_{{{tdd}}}.png]]

 

 

Information about router's modem module can be found by going to <i>Status → [[{{{name}}}_Device|Device Information]]</i> page and checking FW Version field.

 

 

{{#ifeq: {{{3g}}} | 0 |  

 

[[File:Networking_rut_manual_mobile_general_force_lte_network.png|border|class=tlt-border]]

 

<table class="nd-mantable">

      <td>yes | no; default: <b>no</b></td>

      <td>yes | no; default: <b>no</b></td>

        <td>integer [180..3600]; default: <b>300</b></td>

|}}

===Passthrough mode===

===Passthrough mode===

----

----