Changes

__TOC__

__TOC__

==Summary==

==Summary==

<b>Wake on LAN</b> (<b>WOL</b>) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in {{{name}}} routers.

<b>Wake on LAN</b> (<b>WOL</b>) is feature that can "wake up" compliant computers from sleep mode by sending a "magic packet" to the network interface adapter. This chapter is an overview of the Wake on LAN page in {{{name}}} routers.

==Wake on LAN configuration==

==Wake on LAN configuration==

You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the <b>Wake on LAN configuration</b> section:

You can set up the WOL function to use a broadcast address when waking up devices or wake all connected devices on click from the <b>Wake on LAN configuration</b> section.

[[File:{{{file_wol_config}}}]]

[[File:Networking_rutxxx_manual_wake_on_lan_configuration.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

     <tr>

     <tr>

         <th>Field name</th>

         <th>Field</th>

         <th>Value</th>

         <th>Value</th>

         <th>Description</th>

         <th>Description</th>

==Devices to wake up==

==Devices to wake up==

The <b>Devices to wake up</b> section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure bellow for information on the fields contained in the Devices to wake up section.

The <b>Devices to wake up</b> section is used to configure entries for LAN devices that can later be woken up by the WOL function. Refer to the figure below for information on the fields contained in the Devices to wake up section.

[[File:{{{file_wol_devices}}}]]

[[File:Networking_rutxxx_manual_wake_on_lan_devices_to_wake_up.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

     <tr>

     <tr>

         <td>Name</td>

         <td>Name</td>

         <td>string; Default: <b>example</b></td>

         <td>string; default: <b>example</b></td>

         <td>A custom name for the device. Only used for easier management purposes.</td>

         <td>A custom name for the device. Only used for easier management purposes.</td>

     </tr>

     </tr>