Jump to content
  • EN

Template:Networking rutos manual routing: Difference between revisions

Template:Networking rutos manual routing (view source)

Revision as of 12:27, 3 September 2024

13,218 bytes added ,  3 September
no edit summary
VisualWikitext
No edit summary
No edit summary
(45 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05.1
| series = {{{series}}}
| series     = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
}}
}}
}}
 
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Routing (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Routing (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==


Line 189: Line 194:
</table>
</table>


==Advanced Static Routes==
==Policy Based Routing==


The <b>Advanced Static Routes</b> section is used to configure policy-based routing infrastructures, which are usually used in more complex or specific networking scenarios.
The <b>Policy Based Routing</b> section is used to configure policy-based routing infrastructures, which are usually used in more complex or specific networking scenarios.


===Routing Tables===
===Routing Tables===
Line 207: Line 212:
Refer to the table below for information on configuration fields for routing tables.
Refer to the table below for information on configuration fields for routing tables.


[[File:Networking_rutos_manual_routing_advanced_static_routes_routing_tables_routing_table_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_advanced_static_routes_routing_tables_routing_table_settings_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 214: Line 219:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
    <td>Name of Table</td>
        <td>string; default: <b>none</b></td>
        <td>A custom name for the table. A table can be invoked by the both its ID or name.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 219: Line 229:
       <td>integer [1..252]; default: <b>none</b></td>
       <td>integer [1..252]; default: <b>none</b></td>
       <td>Unique numerical identifier for the table. A table can be invoked by the both its ID or name.</td>
       <td>Unique numerical identifier for the table. A table can be invoked by the both its ID or name.</td>
    </tr>
    <tr>
    <td>Name of Table</td>
        <td>string; default: <b>none</b></td>
        <td>A custom name for the table. A table can be invoked by the both its ID or name.</td>
     </tr>
     </tr>
</table>
</table>
Line 324: Line 329:


Each protocol is described in the sections below.
Each protocol is described in the sections below.
{{#switch: {{{series}}} | RUTX | RUTM= | #default=
<u><b>


Note:</b> Dynamic Routing is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
}}
===BGP===
===BGP===
----
----
Line 331: Line 340:
====General Settings====
====General Settings====
----
----
Below is an example of BGP <b>General</b> settings section.
The <b>General Settings</b> section is used to turn BGP protocol usage on or off or to upload an external BGP configuration. Below is an example of the BGP General Settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_general_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_general_settings_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 343: Line 352:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns BGP protocol usage on or off.</td>
       <td>Turns BGP protocol usage on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable vty</td>
       <td>Enable vty</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns vty access on or off.</td>
       <td>Turns vty access on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Import config</td>
     <td>Import config</td>
         <td>-</td>
         <td>- (interactive button)</td>
         <td>Uploads an external BGP configuration.</td>
         <td>Uploads an external BGP configuration.</td>
     </tr>
     </tr>
Line 360: Line 369:
====BGP Instance====
====BGP Instance====
----
----
Below is an example of '''BGP Instance''' settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance.png|border|class=tlt-border]]
To create a new BGP instance, look to the Add New Instance section under BGP instances; type in a custom name for the BGP instance and click the 'Add' button or you can 'Edit' a general instance:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance_edit.png|border|class=tlt-border]]
 
You will be redirected to general BGP instance settings:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 372: Line 386:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns the BGP instance on or off.</td>
       <td>Turns the BGP instance on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>AS</td>
       <td>AS</td>
       <td>default: <b>none</b></td>
       <td>integer [1..4294967295]; default: <b>none</b></td>
      <td>AS number is an identification of an autonomous system. The BGP protocol uses the AS number for detecting whether the BGP connection is internal or an external one.</td>
        <td>AS number is an identification of an autonomous system. BGP protocol uses the AS number for detecting whether the BGP connection is an internal one or external one.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>BGP router ID</td>
     <td>BGP router ID</td>
         <td>default: <b>none</b></td>
         <td>32-bit integer; default: <b>none</b></td>
         <td>The router ID is used by BGP to identify the routing device from which a packet originated. Fefault router ID value is selected as the largest IP Address of the interface.</td>
         <td>The router ID is used by BGP to identify the routing device from which a packet originated. Default router ID value is selected as the largest IP Address of the interface.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Network</td>
     <td>Network</td>
         <td>default: <b>none</b></td>
         <td>ip/netmask; default: <b>none</b></td>
         <td>Adds an announcement network(s).</td>
         <td>Adds an announcement network(s). Routes to these networks will be shared over BGP.</td>
    </tr>
    <tr>
    <td>VRF interface</td>
        <td>VRF interface; default: <b>Default</b></td>
        <td>To create new VRF interface, please visit: [[{{{name}}} VRF|VRF]] </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Redistribution options</td>
         <td>Redistribution options</td>
         <td>default: <b>none</b></td>
         <td>Connected routes {{!}} Kernel added routes {{!}} NHRP routes {{!}} OSPF routes {{!}} Static routes {{!}} custom; default: <b>none</b></td>
         <td>Distributes selected routes. Route redistribution is a process that allows a network to use a routing protocol to dynamically route traffic based on information learned from a separate routing protocol.</td>
         <td>Distributes selected routes. Route redistribution is a process that allows a network to use a routing protocol to dynamically route traffic based on information learned from a separate routing protocol.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Deterministic MED</td>
         <td>Deterministic MED</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Compares MEDs between same AS, while ignoring their age.</td>
         <td>Compares MEDs between same AS, while ignoring their age.</td>
    </tr>
    <tr>
        <td>eBGP Requires Policy</td>
        <td>off {{!}} on; default: <b>on</b></td>
        <td>Enable/Disable eBGP Import or Export policy requirement. Enabled by default as per RFC 8212.</td>
     </tr>
     </tr>
</table>
</table>


====BGP Peers====
=====BGP Peers=====
----
----
<b>BGP Peers</b> are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by default.
<b>BGP Peers</b> are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_v2.png|border|class=tlt-border]]


To create a new Peer, look to the Add New Instance section under BGP Peer; type in a custom name for the BGP Peer and click the 'Add' button:
To create a new Peer, look to the Add New Instance section under BGP Peer; type in a custom name for the BGP Peer and click the 'Add' button:


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button_v1.png|border|class=tlt-border]]


The newly added BGP Peer configuration should look similar to this:
You will be redirected to general peer settings:


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_added.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_bgp_peer_v4.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 421: Line 445:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns this BGP peer on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Remote AS</td>
       <td>Remote AS</td>
       <td>default: <b>none</b></td>
       <td>integer [1..4294967295]; default: <b>none</b></td>
       <td>Remote autonomous system number of this remote BGP Neighbour.</td>
       <td>Remote autonomous system number of this remote BGP Neighbor.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Remote address</td>
     <td>Remote address</td>
         <td>ip4; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>IPv4 address of this remote BGP Neighbour.</td>
         <td>IPv4 address of this remote BGP Neighbor. This option is required.</td>
     </tr>
     </tr>
     <tr>
     <tr>
      <td>Enable</td>
    <td>Remote port</td>
      <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
        <td>integer [0..65535]; default: <b>none</b></td>
      <td>Turns turns this BGP peer on or off.</td>
        <td>Listening port number of the BGP Neighbor.</td>
    </tr>
</table>
 
To see more settings for a BGP Peer, click the 'Edit' button next to it:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_edit_button.png|border|class=tlt-border]]
 
The full BGP Peer configuration page should look similar to this:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_bgp_peer.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
      <td>Enable</td>
    <td>EBGP Multihop</td>
      <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
        <td>integer; default: <b>none</b></td>
      <td>Turns this BGP peer on or off.</td>
        <td>Time to Live value for packets associated with this remote BGP Neighbor.</td>
     </tr>
     </tr>
     <tr>
     <tr>
      <td>Remote AS</td>
    <td>Weight</td>
      <td>default: <b>none</b></td>
        <td>integer [0..65535]; default: <b>none</b></td>
      <td>Remote autonomous system number of this remote BGP Neighbour.</td>
        <td>Specifies a default weight value for the neighbor’s routes. Higher weight is preferred.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Remote address</td>
     <td>Keepalive timer</td>
         <td>ip4; default: <b>none</b></td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>IPv4 address of this remote BGP Neighbour.</td>
         <td>Frequency (in seconds) of keep alive messages.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Remote port</td>
     <td>Holdtime</td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>Listening port number of the BGP Neighbour.</td>
         <td>Max wait time (in seconds) for a response from this neighbor before considering the peer unreachable.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>EBGP Multihop</td>
     <td>Connect timer</td>
         <td>integer; default: <b>none</b></td>
         <td>integer [1..65535]; default: <b>none</b></td>
         <td>Time to Live value for packets associated with this remote BGP Neighbour.</td>
         <td>Max time (in seconds) to make a connection to this peer. If a connection cannot be made in this time, connection to this peer is considered unsuccessful.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Default originate</td>
         <td>Default originate</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Announces default routes to this peer.</td>
         <td>Announces default routes to this peer.</td>
     </tr>
     </tr>
Line 486: Line 499:
         <td>Description</td>
         <td>Description</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>A custom description for this BGP peer. Used for easier management purposes.</td>
         <td>A custom description for this BGP peer. Used for easier management purposes only.</td>
    </tr>
    <tr>
        <td>Password</td>
        <td>string; default: <b>none</b></td>
        <td>Password for this BGP Neighbor.</td>
     </tr>
     </tr>
</table>
</table>


====BGP Peer Groups====
=====BGP Peer Groups=====
----
----
A <b>BGP Peer Group</b> is a collection of routers that use the BGP protocol to dynamically redistribute routes among peers (other routers). The figure below is an example of the BGP Peer Groups section, which is empty by default.
A <b>BGP Peer Group</b> is a collection of routers that use the BGP protocol to dynamically redistribute routes among peers (other routers). The figure below is an example of the BGP Peer Groups section, which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_v2.png|border|class=tlt-border]]


To create a new Peer Group, look to the Add New Instance section under BGP Peer Groups; type in a custom name for the BGP Peer Group and click the 'Add' button:
To create a new Peer Group, look to the Add New Instance section under BGP Peer Groups; type in a custom name for the BGP Peer Group and click the 'Add' button:


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_groups_add_button_v1.png|border|class=tlt-border]]


The newly added BGP Peer Group configuration should look similar to this:
You will be redirected to general peer groups settings:


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_added.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_bgp_peer_group_v2.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Remote AS</td>
      <td>default: <b>none</b></td>
      <td>Remote autonomous system number.</td>
    </tr>
</table>
 
To see more settings for a BGP Peer Group, click the 'Edit' button next to it:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_edit_button.png|border|class=tlt-border]]
 
The full BGP Peer Group configuration page should look similar to this:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_bgp_peer_group.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 533: Line 530:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns the BGP Peer Group configuration on or off.</td>
       <td>Turns the BGP Peer Group configuration on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Remote AS</td>
       <td>Remote AS</td>
       <td>default: <b>none</b></td>
       <td>integer [1..65535]; default: <b>none</b></td>
       <td>Remote autonomous system number.</td>
       <td>Neighbour's remote AS.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Neighbor address</td>
     <td>Neighbor address</td>
         <td>ip4; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>IPv4 address(es) of a remote BGP Neighbour.</td>
         <td>Neighbour's remote IPv4 address.</td>
    </tr>
        <tr>
    <td>Listen Range</td>
        <td>ip4 with mask; default: <b>none</b></td>
        <td>Accept connections from any peers in the specified prefix.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Advertisement interval</td>
         <td>Advertisement interval</td>
         <td>integer; default: <b>none</b></td>
         <td>integer; default: <b>none</b></td>
         <td>BGP advertisement frequency (in seconds).</td>
         <td>Delay between updates for a neighbor session (in seconds).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Neighbor configuration</td>
         <td>Neighbor configuration</td>
         <td>None <nowiki>|</nowiki> Route Reflector client <nowiki>|</nowiki> Route Server client; default: <b>None</b></td>
         <td>None {{!}} Route Reflector client {{!}} Route Server client; default: <b>None</b></td>
         <td>Defines the role of a BGP Neighbour.
         <td>Defines the role of a BGP Neighbor.
             <ul>
             <ul>
                 <li><b>Route Reflector client</b> - redistributes received routes.</li>
                 <li><b>Route Reflector client</b> - redistributes received routes.</li>
Line 563: Line 565:
     <tr>
     <tr>
         <td>Disable next hop calculation</td>
         <td>Disable next hop calculation</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} <span style="color: blue;"><b>on</b></span>; default: <b>off</b></td>
         <td>Turns next hop calculation for this BGP Peer Group on or off.</td>
         <td>Turns next hop calculation for this BGP Peer Group on or off.</td>
    </tr>
    <tr>
        <td>Apply also to ibgp-learned routes</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>When acting as a route reflector, applies to ibgp-learned routes as well. This field becomes visible when 'Disable next hop calculation' is turned on.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Inbound soft-reconfiguration</td>
         <td>Inbound soft-reconfiguration</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns inbound soft-reconfiguration for this neighbor on or off.</td>
         <td>Turns inbound soft-reconfiguration for this Neighbor on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Disable connected check</td>
         <td>Disable connected check</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
        <td>One-hop away EBGP peer using loopback address</td>
        <td>When turned on, Disable connected check enables a directly connected eBGP Neighbor to peer using a loopback address without adjusting the default TTL of 1.</td>
    </tr>
</table>
 
=====Route Map Filters=====
----
The <b>Route Map Filters</b> section is used to configure special filters that changes direction for BGP Peers. Below is an example of the Route Map Filters section which is empty by default. You can add a new filter by clicking the 'Add' button
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_route_maps_filters_add_button_v1.png|border|class=tlt-border]]
 
An Route Map Filters configuration for BGP should look similar to this:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_route_maps_filters_configuration_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Peer</td>
      <td>bgp peer; default: <b>-</b></td>
      <td>Applies the filter rule for the specified peer.</td>
    </tr>
    <tr>
      <td>Route map</td>
      <td>route map; default: <b>-</b></td>
      <td>Route map filter to apply.</td>
    </tr>
    <tr>
    <td>Direction</td>
        <td>Inbound {{!}} Outbound; default: <b>Inbound</b></td>
        <td>If direction is Inbound, the access list is applied to input routes. If direction is Outbound the access list is applied to advertised routes.</td>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns an Route Map filter on or off.</td>
     </tr>
     </tr>
</table>
</table>
Line 582: Line 627:
The <b>Access List Filters</b> section is used to configure special filters that restrict or allow access to specified networks for BGP Peers. Below is an example of the Access List Filters section which is empty by default. You can add a new filter by clicking the 'Add' button
The <b>Access List Filters</b> section is used to configure special filters that restrict or allow access to specified networks for BGP Peers. Below is an example of the Access List Filters section which is empty by default. You can add a new filter by clicking the 'Add' button


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_access_list_filters_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_access_list_filters_add_button_v1.png|border|class=tlt-border]]


An Access List Filter configuration should look similar to this:
An Access List Filter configuration for BGP should look similar to this:


[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_access_list_filters_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_access_list_filters_configuration_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 596: Line 641:
     <tr>
     <tr>
       <td>Peer</td>
       <td>Peer</td>
       <td>bgp peer; default: <b>none</b></td>
       <td>bgp peer; default: <b>-</b></td>
       <td>Applies the filter rule for the specified peer.</td>
       <td>Applies the filter rule for the specified peer.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Action</td>
     <td>Action</td>
         <td>Permit | Deny; default: <b>Permit</b></td>
         <td>Permit {{!}} Deny; default: <b>Permit</b></td>
         <td>When BGP traffic matches this rule, the device will take the action specified in this field, which is to either allow or block traffic.</td>
         <td>When BGP traffic matches this rule, the device will take the action specified in this field, which is to either allow or block traffic.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Network</td>
     <td>Filter network</td>
         <td>ip/netmask | Any; default: <b>none</b></td>
         <td>Any {{!}} custom; default: <b>Any</b></td>
         <td>Matches traffic destined or originating from (depends on 'Direction' selection) to the network specified in this field.</td>
         <td>Applies filter rule for this source network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Direction</td>
     <td>Direction</td>
         <td>Inbound | Outbound; default: <b>Inbound</b></td>
         <td>Inbound {{!}} Outbound; default: <b>Inbound</b></td>
         <td>Matches network traffic direction, which can either be traffic destined to this device (Inbound) or traffic originating from this device (Outbound).</td>
         <td>If direction is Inbound, the access list is applied to input routes. If direction is Outbound the access list is applied to advertised routes.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns an Access filter on or off.</td>
       <td>Turns an Access filter on or off.</td>
     </tr>
     </tr>
</table>
</table>


===RIP Protocol===
====Route Maps====
----
A <b>Route Maps</b>  allow you to configure a filtering criteria by defining a set of rules or match statements with a permit or deny condition. It includes a series of match statements to determine if a route matches the criteria defined in the statement and then apply the permit or deny rule accordingly.
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_route_maps_v1.png|border|class=tlt-border]]
 
To create a new Route Maps, look to the Add New Instance section under Route Maps; type in a custom name for the Route Map and click the 'Add' button:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_route_maps_add_button_v1.png|border|class=tlt-border]]
 
You will be redirected to general route maps settings:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_route_maps_edit_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns the Route Maps configuration on or off.</td>
    </tr>
    <tr>
    <td>Action</td>
        <td>Permit {{!}} Deny; default: <b>Permit</b></td>
        <td>IPv4 address of this remote BGP Neighbor.</td>
    </tr>
    <tr>
    <td>Local preference</td>
        <td>integer [0..4294967295]; default: <b>none</b></td>
        <td>Used to determine best route towards a certain destination.</td>
    </tr>
        <tr>
    <td>Metric</td>
        <td>ip4 with mask; default: <b>none</b></td>
        <td>Sets a metric value for determining the preferred path into an AS.</td>
    </tr>
</table>
 
===RIP===
----
----
The <b>Routing Information Protocol (RIP)</b> is one of the oldest distance-vector routing protocols which employ the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from source to destination. The maximum number of hops allowed for RIP is 15, which limits the size of networks that RIP can support. A hop count of 16 is considered an infinite distance and the route is considered unreachable. RIP implements the split horizon, route poisoning and holddown mechanisms to prevent incorrect routing information from being propagated.
The <b>Routing Information Protocol (RIP)</b> is one of the oldest distance-vector routing protocols which employ the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from source to destination. The maximum number of hops allowed for RIP is 15, which limits the size of networks that RIP can support. A hop count of 16 is considered an infinite distance and the route is considered unreachable. RIP implements the split horizon, route poisoning and holddown mechanisms to prevent incorrect routing information from being propagated.
Line 627: Line 714:
====General Settings====
====General Settings====
----
----
Below is an example of RIP '''General''' settings section.
The <b>General Settings</b> section is used to configure some of the main operating parameters of the RIP protocol. Below is an example of the RIP General Settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_rip_general_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_general_settings_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 639: Line 726:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles RIP Protocol on or off</td>
       <td>Turns RIP Protocol usage on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable vty</td>
       <td>Enable vty</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles vty access on or off</td>
       <td>Turns vty access on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Import config</td>
     <td>Import config</td>
         <td>-</td>
         <td>- (interactive button)</td>
         <td>Uses imported RIP configurations.</td>
         <td>Upload a external RIP configuration.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Version</td>
     <td>Version</td>
         <td>default: '''2'''</td>
         <td>2 {{!}} 1; default: <b>2</b></td>
         <td>Specifies the version of RIP.</td>
         <td>Specifies the used version of the RIP protocol.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Neighbor</td>
     <td>Neighbor</td>
         <td>default: <b>none</b></td>
         <td>rip neighbor; default: <b>none</b></td>
         <td>Neighbour IP addres</td>
         <td>Defines a RIP Neighbor(s).</td>
     </tr>
     </tr>
</table>
</table>
Line 666: Line 753:
====RIP Interfaces====
====RIP Interfaces====
----
----
Below is an example of '''RIP Interfaces''' settings section.
The <b>RIP Interfaces</b> section is used to define which existing network interfaces can participate in RIP communication. Below is an example of the RIP Interfaces section which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_rip_rip_interfaces.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_rip_interfaces.png|border|class=tlt-border]]


[[File:Networking_rutos_manual_routing_dynamic_routes_rip_rip_interfaces_configuration.png|border|class=tlt-border]]
To create a new RIP Interface, look to the Add New Interface section; enter a custom name and click the 'Add' button:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_rip_interfaces_add_button.png|border|class=tlt-border]]
 
RIP Interface configuration should look similar to this:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_rip_interfaces_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 679: Line 772:
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Interface</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>network interface; default: <b>loopback</b></td>
      <td>Toggles RIP Interface on or off</td>
      <td>Network interface that will be used with the RIP protocol.</td>
    </tr>
    <tr>
    <td>Passive interface</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Sets the specified interface to passive mode. On passive mode interface, all receiving packets are processed as normal and <b>ripd</b> does not send either multicast or unicast RIP packets.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Interface</td>
       <td>Enable</td>
       <td>network interfaces; default: '''loopback'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Network interface to be used with the RIP interface</td>
       <td>Turns a RIP Interface on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
    <td>Passive interface</td>
      <td>Delete</td>
        <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
      <td>- (interactive button)</td>
        <td>Sets the specified interface to passive mode. On passive mode interface, all receiving packets are processed as normal and ripd does not send either multicast or unicast RIP packets
      <td>Deletes RIP inerfaces instance.</td>
</td>
     </tr>
     </tr>
</table>
</table>
Line 698: Line 795:
====Access list filters====
====Access list filters====
----
----
Below is an example of '''Access list filters''' settings section.
The <b>Access List Filters</b> section is used to configure special filters that restrict or allow access to specified networks for RIP Neighbors. Below is an example of the Access List Filters section which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_rip_access_list_filters.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_access_list_filters.png|border|class=tlt-border]]


[[File:Networking_rutos_manual_routing_dynamic_routes_rip_access_list_filters_configuration.png|border|class=tlt-border]]
To add a new filter, look to the Add New Instance section; enter a custom name and select RIP interface then click the 'Add' button:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_access_list_filters_add_button_v1.png|border|class=tlt-border]]
 
An Access List Filter configuration for RIP should look similar to this:
 
[[File:Networking_rutos_manual_routing_dynamic_routes_rip_access_list_filters_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 709: Line 812:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
      <td>Name</td>
      <td>string on; default: <b>none</b></td>
      <td>A custom name for a filter. Used for easier management purposes only.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles the Access filter on or off</td>
       <td>Turns an Access filter on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RIP interface</td>
         <td>RIP interface</td>
         <td>RIP interface; default: '''first interface on list'''</td>
         <td>rip interface; default: <b>none</b></td>
         <td>Applies the rule for the specified interface</td>
         <td>Specifies the RIP interface to which the filter will apply to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Action</td>
     <td>Action</td>
         <td>default: '''Permit'''</td>
         <td>Permit {{!}} Deny; default: <b>Permit</b></td>
         <td>Denies or permits matched entry</td>
         <td>When RIP traffic matches this rule, the device will take the action specified in this field, which is to either allow or block traffic.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Network</td>
     <td>Network</td>
         <td>default: '''Any'''</td>
         <td>ip/netmask {{!}} Any; default: <b>Any</b></td>
         <td>Applies filter rule for this source network.</td>
         <td>Matches traffic destined or originating from (depends on 'Direction' selection) to the network specified in this field.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Direction</td>
     <td>Direction</td>
         <td>default: '''Inbound'''</td>
         <td>Inbound {{!}} Outbound; default: <b>Inbound</b></td>
         <td>If direction is '''Inbound''', the access list is applied to input routes. If direction is '''Outbound''' the access list is applied to advertised routes.</td>
         <td>Matches network traffic direction, which can either be traffic destined to this device (Inbound) or traffic originating from this device (Outbound).</td>
     </tr>
     </tr>
</table>
</table>


===OSPF Protocol===
===OSPF===
----
----
'''Open Shortest Path First (OSPF)''' is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior gateway protocols (IGPs), operating within a single autonomous system (AS). It is defined as OSPF Version 2 in RFC 2328 for IPv4.
<b>Open Shortest Path First</b> (<b>OSPF</b>) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior gateway protocols (IGPs), operating within a single autonomous system (AS). It is defined as OSPF Version 2 in RFC 2328 for IPv4.


====General Settings====
====General Settings====
----
----
Below is an example of OSPF '''General''' settings section.
The <b>General Settings</b> section is used to configure some of the main operating parameters of the OSPF protocol. Below is an example of the OSPF General Settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_general_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_general_settings_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 755: Line 863:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles OSPF Protocol on or off</td>
       <td>Turns OSPF Protocol usage on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable vty</td>
       <td>Enable vty</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles vty access on or off</td>
       <td>Turns vty access on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Import</td>
     <td>Import</td>
         <td>-</td>
         <td>- (interactive)</td>
         <td>Uses imported OSPF configurations</td>
         <td>Uploads a external OSPF configuration.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Router ID</td>
     <td>Router ID</td>
         <td>default: <b>none</b></td>
         <td>32-bit integer; default: <b>none</b></td>
         <td>Sets the router-ID of the OSPF process. The router-ID may be an IP address of the router, but need not be - it can be any arbitrary 32bit number</td>
         <td>Sets the router-ID in the OSPF network.</td>
    </tr>
    <tr>
    <td>Passive interfaces</td>
        <td>network interface(s); default: <b>none</b></td>
        <td>Network interfaces that should be considered as passive. OSPF hello packets are not sent on these interfaces.</td>
    </tr>
    <tr>
    <td>Generate a default external route</td>
        <td>off {{!}} default {{!}} always; default: <b>off</b></td>
        <td>Defines the behavior for advertising a default route over OSPF. Possible values are:
            <ul>
                <li><b>off</b> - does not advertise a default route.</li>
                <li><b>default</b> - advertises the default route if the route is in the routing table.</li>
                <li><b>always</b> - specifies to always advertise the default route regardless of whether the routing table has a default route.</li>
            </ul>
        </td>
    </tr>
    <tr>
        <td>Redistribution options</td>
        <td>Connected routes {{!}} Kernel {{!}} NHRP {{!}} BGP {{!}} OSPF {{!}} RIP {{!}} EIGRP {{!}} Static; default: <b>none</b></td>
        <td>Distributes selected routes. Route redistribution is a process that allows a network to use a routing protocol to dynamically route traffic based on information learned from a separate routing protocol.</td>
     </tr>
     </tr>
</table>
</table>
Line 777: Line 906:
====OSPF Interface====
====OSPF Interface====
----
----
Below is an example of '''OSPF Interface''' settings section.
The <b>OSPF Interfaces</b> section is used to define which existing network interfaces can participate in OSPF communication. Below is an example of the OSPF Interfaces section which is empty by default. To create a new OSPF Interface, simply click the 'Add' button:


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_add_button.png|border|class=tlt-border]]


By pressing the '''Edit''' button you can find more settings related to '''OSPF Interface'''.
OSPF Interface configuration should look similar to this:


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_begin_to_edit.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_begin_to_edit.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Interface</td>
      <td>network interface; default: <b>loopback</b></td>
      <td>Network interface that will be used with the OSPF protocol.</td>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns an OSPF Interface on or off.</td>
    </tr>
</table>
To see more settings for an OSPF interface, click the 'Edit' button next to it:
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_edit_button.png|border|class=tlt-border]]


You should directed to a window such as this:
You should directed to a window such as this:


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_interface_configuration_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 797: Line 948:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles OSPF area on or off</td>
       <td>Turns the OSPF area on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Cost</td>
         <td>Cost</td>
         <td>default: <b>none</b></td>
         <td>integer [1..65535]; default: <b>none</b></td>
         <td>The cost value is set to router-LSA’s metric field and used for SPF calculation</td>
         <td>The cost value is set to router-LSA’s metric field and used for SPF calculation.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Hello Interval</td>
         <td>Hello Interval</td>
         <td>default: '''10'''</td>
         <td>integer [1..65535]; default: <b>10</b></td>
         <td>This value controls how frequently (every n seconds) a 'Hello' packet is sent out on the specified interface</td>
         <td>Frequency (in seconds) at which a "Hello" packet is sent out on the specified interface.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Router Dead Interval</td>
         <td>Router Dead Interval</td>
         <td>default: '''40'''</td>
         <td>integer [1..65535]; default: <b>40</b></td>
         <td>This value must be the same for all routers attached to a common network</td>
         <td>This value must be the same for all routers attached to a common OSPF network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Retransmit</td>
         <td>Retransmit</td>
         <td>default: '''5'''</td>
         <td>integer [0..65535]; default: <b>5</b></td>
         <td>This value is used when re-transmitting Database Description and Link State Request packets</td>
         <td>Used in Database Description and Link State Request packet re-transmission.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Priority</td>
         <td>Priority</td>
         <td>default: '''1'''</td>
         <td>integer [0..255]; default: <b>1</b></td>
         <td>The router with the highest priority will be more eligible to become Designated Router. Setting the value to 0, makes the router ineligible to become Designated Router</td>
         <td>OSPF router priority. The router with the highest priority will be more eligible to become the "Designated Router". Setting the value to 0, makes the router ineligible to become a "Designated Router."</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Type</td>
         <td>Type</td>
         <td>default: <b>none</b></td>
         <td>Broadcast {{!}} Non-Broadcast {{!}} Point-to-point {{!}} Point-to-Multipoint; default: <b>Broadcast </b></td>
         <td>OSPF interface configuration type.</td>
         <td>OSPF interface configuration type.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Authentication</td>
         <td>Authentication</td>
         <td>default: '''None'''</td>
         <td>None {{!}} Password {{!}} MD5 HMAC; default: <b>None</b></td>
         <td>Authentication method.</td>
         <td>Specifies the Authentication method.</td>
    </tr>
</table>
 
====OSPF Neighbors====
----
The <b>OSPF Neighbors</b> section can be used to configure other users ("neighbors") of the same OSPF network statically.
 
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_neighbor_configuration_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns this OSPF neighbor configuration on or off.</td>
    </tr>
    <tr>
        <td>Neighbor</td>
        <td>ip4; default: <b>none</b></td>
        <td>IP address of the OSPF neighbor.</td>
    </tr>
    <tr>
        <td>Neighbor Priority</td>
        <td>integer [1..255]; default: <b>none</b></td>
        <td>Priority of this neighbor</td>
    </tr>
    <tr>
        <td>Polling interval</td>
        <td>integer [1..65535]; default: <b>none</b></td>
        <td>Check for dead neighbor interval (in seconds).</td>
     </tr>
     </tr>
</table>
</table>
Line 839: Line 1,024:
====OSPF Area====
====OSPF Area====
----
----
Below is an example of '''OSPF Area''' settings section.
An <b>OSPF Area</b> is a collection of OSPF Networks that can serve each other. Below is an example of the OSPF Area section which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_area.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_area.png|border|class=tlt-border]]


To add a new OSPF area, look to the 'Add New Area' section. Enter a custom name and click the 'Add' button. Your new area will appear in the 'OSPF Area' list.
To add a new OSPF Area, look to the Add New Area section; enter a custom name and click the 'Add' button.


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_area_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_area_add_button.png|border|class=tlt-border]]
 
The newly added new Area will appear in the OSPF Area list.
 
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_area_configuration_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 854: Line 1,043:
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Name</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>string on; default: <b>none</b></td>
       <td>Toggles OSPF area on or off</td>
      <td>A custom name for an OSPF Area. Used for easier management purposes only.</td>
    </tr>
    <tr>
      <td>Area</td>
      <td>32-bit integer; default: <b>none</b></td>
      <td>OSPF Area ID. OSPF Networks that are meant to communicate with each other should belong to the same Area (have the Area ID).</td>
    </tr>
    <tr>
      <td>STUB</td>
      <td>off {{!}} on; default: <b>off</b></td>
       <td>A stub area is an area in which advertisements of external routes are not allowed, reducing the size of the database.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Cost</td>
       <td>Enable</td>
       <td>IP;default: <b>none</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Specifies OSPF area</td>
       <td>Turns an OSPF Area on or off.</td>
     </tr>
     </tr>
</table>
</table>
Line 867: Line 1,066:
====OSPF Networks====
====OSPF Networks====
----
----
Below is an example of '''OSPF Networks''' settings section.
The <b>OSPF Network</b> section is used to add networks to OSPF areas that can later be shared (provide access to) with other OSPF routers.
 
Below is an example of the OSPF Area section which is empty by default.


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_networks.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_networks.png|border|class=tlt-border]]


To add a new OSPF network, look to the 'Add New Network' section. Enter a custom name and click the 'Add' button. Your new network will appear in the 'OSPF Networks' list.
To add a new OSPF Network, look to the Add New Network section; enter a custom name and click the 'Add' button.
 
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_network_add_button.png|border|class=tlt-border]]
 
Your new network will appear in the OSPF Networks list


[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_networks_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_ospf_protocol_ospf_networks_configuration.png|border|class=tlt-border]]
Line 882: Line 1,087:
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Name</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>string on; default: <b>none</b></td>
       <td>Toggles OSPF network on or off</td>
       <td>A custom name for an OSPF Area. Used for easier management purposes only.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Network</td>
       <td>Network</td>
       <td>[a.b.c.d/m]; default: <b>none</b></td>
       <td>ip/netmask; default: <b>none</b></td>
       <td>This command specifies the OSPF enabled interface. If the interface has an address from the range '''a.b.c.d/m''' then enables OSPF on this interface so the router can provide network information to the other OSPF routers via this interface</td>
       <td>IP address/netmask of a network. OSPF Network locations are shared with other OSPF routers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Area</td>
     <td>Area</td>
         <td>OSPF area; default: <b>none</b></td>
         <td>OSPF area; default: <b>none</b></td>
         <td>Specifies OSPF area</td>
         <td>ID of an OSPF Area (to which this network should belong to).</td>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns the usage of this network (in OSPF) on or off.</td>
     </tr>
     </tr>
</table>
</table>
Line 904: Line 1,114:
====General====
====General====
----
----
Below is an example of EIGRP '''General''' settings section.
The <b>General Settings</b> section is used to configure some of the main operating parameters of the EIGRP protocol. Below is an example of the EIGRP General Settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_eigrp_general_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_eigrp_general_settings_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 916: Line 1,126:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles EIGRP network on or off</td>
       <td>Turns EIGRP protocol usage on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable logging</td>
         <td>Enable logging</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Enable logging of EIGRP</td>
         <td>Turns logging of EIGRP traffic on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>AS</td>
         <td>AS</td>
         <td>default: <b>none</b></td>
         <td>integer [1..65535]; default: <b>none</b></td>
         <td>'''EIGRP''' uses this number so that it makes sure it only talks to other EIGRP speakers that are in the same AS. For instance, if you have two routers, one with "router eigrp 1" and one with "router eigrp 2," then they would not form an adjacency</td>
         <td>EIGRP Autonomous System (AS) number. It is an identifier that represents a routing domain; EIGRP routers can exchange routes within the same Autonomous System.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Router ID</td>
         <td>Router ID</td>
         <td>IP; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>'''EIGRP''' router-ID in IP address format</td>
         <td>The router ID is used by EIGRP to identify the routing device from which a packet originated. Default router ID value is selected as the largest IP Address of the interface.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Network</td>
       <td>Network</td>
      <td>IP; default: <b>none</b></td>
        <td>ip/netmask; default: <b>none</b></td>
      <td>The announcement network</td>
        <td>Adds an announcement network(s). Routes to these networks will be shared over EIGRP.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Redistribution options</td>
         <td>Redistribution options</td>
         <td>default: <b>none</b></td>
         <td>Connected routes {{!}} Kernel added routes {{!}} NHRP routes {{!}} OSPF routes {{!}} Static routes {{!}} custom; default: <b>none</b></td>
         <td>'''Route redistribution''' is a process that allows a network to use a '''routing''' protocol to dynamically '''route''' traffic based on information learned from a different '''routing''' protocol.</td>
         <td>Distributes selected routes. Route redistribution is a process that allows a network to use a routing protocol to dynamically route traffic based on information learned from a separate routing protocol.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Neighbors</td>
     <td>Neighbors</td>
         <td>IP; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>Neighbour IP addres</td>
         <td>Defines the EIGRP Neighbors (based on their IP addresses) that this device is meant to associate with.</td>
     </tr>
     </tr>
</table>
</table>


===NHRP Protocol===
===NHRP===
----
----
Next Hop Resolution Protocol (NHRP) is a protocol or method that can be used so that a computer sending data to another computer can learn the most direct route (the fewest number of hops) to the receiving computer.
<b>Next Hop Resolution Protocol</b> (<b>NHRP</b>) is a protocol or method that can be used so that a computer sending data to another computer can learn the most direct route (the fewest number of hops) to the receiving computer.


====General Settings====
====General Settings====
----
----
Below is an example of NHRP '''General''' settings section.
The <b>General Settings</b> section is used to turn NHRP protocol usage on or off. Below is an example of the NHRP General Settings section.


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_general_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_general_settings_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 969: Line 1,179:
     <tr>
     <tr>
       <td>Enable service</td>
       <td>Enable service</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Toggles NHRP network on or off</td>
       <td>Turns NHRP protocol usage on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable logging</td>
       <td>Enable logging</td>
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>on</b></td>
       <td>Toggles NHRP logging on or off</td>
       <td>Turns NHRP traffic logging on or off.</td>
     </tr></table>
     </tr></table>


====Interfaces====
====Interfaces====
----
----
Below is an example of NHRP <b>Interfaces</b> settings section. By default, it is empty.
The <b>Interfaces</b> section is used to define which existing network interfaces can participate in NHRP communication. Below is an example of the NHRP Interfaces section which is empty by default.  


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_v2.png|border|class=tlt-border]]


To add a new NHRP interface, look to the 'Add New Interface' section. Enter a custom name and click the 'Add' button. Your new interface will appear in the 'Interfaces' list.
To create a new NHRP Interface, look to the Add New Interface section; enter a custom name and click the 'Add' button.


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_begin_to_edit.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_add_button_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
The newly added NHRP interface will appear in the Interfaces list and should look similar to this:
    <tr>
 
        <th>Field</th>
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_begin_to_edit_v2.png|border|class=tlt-border]]
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
      <td>Toggles interface on or off</td>
    </tr>
</table>


=====NHRP Interface Configuration=====
To see more settings for an NHRP Interface, click the 'Edit' button next to it. You will be redirected to a window that looks similar to this:
----
By pressing the '''Edit''' button you can find more settings related to '''NHRP Interface.'''


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_interface_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_interface_configuration_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 1,015: Line 1,214:
     <tr>
     <tr>
         <td>Enabled</td>
         <td>Enabled</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b>
         <td>off {{!}} on; default: <b>off</b></td>
        </td><td>Enables DMVPN client</td>
        <td>Turns the NHRP Interface on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Interface</td>
         <td>Interface</td>
         <td>default: <b>br-lan</b></td>
         <td>network interface; default: <b>br-lan</b></td>
         <td>Interface which will be using NHRP</td>
         <td>Network interface associated with this NHRP Interface.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Network ID</td>
         <td>Network ID</td>
         <td>default: <b>none</b></td>
         <td>32-bit integer; default: <b>none</b></td>
         <td>Network ID of NHRP</td>
         <td>A numerical identifier for this NHRP Interface.</td>
    </tr>
    <tr>
        <td>NHRP authentication key</td>
        <td>string; default: <b>none</b></td>
        <td>A password used in NHRP authentication.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>NHS</td>
         <td>NHS</td>
         <td>Dynamic <nowiki>|</nowiki> custom; default: <b>none</b></td>
         <td>dynamic {{!}} custom(ip4); default: <b>dynamic</b></td>
         <td>IP address of Next-Hop Server.</td>
         <td>IP address of a Next-Hop server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>NBMA</td>
         <td>NBMA</td>
         <td>default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>Non-Broadcast Multi-Access(NBMA) network IP address</td>
         <td>Non-Broadcast Multi-Access (NBMA) network IP address.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Hold-time</td>
         <td>Hold-time</td>
         <td>default: '''7200'''</td>
         <td>integer; default: <b>7200</b></td>
         <td>Specifies the holding time for NHRP Registration Requests and Resolution Replies sent from this interface or shortcut-target. The holdtime is specified in seconds and defaults to two hours.</td>
         <td>Specifies the holding time (in seconds) for NHRP Registration Requests and Resolution Replies sent from this interface or shortcut-target.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IPsec support</td>
         <td>IPsec support</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} <span style="color: red;">on</span>; default: <b>off</b></td>
         <td>Use NHRP over IPsec</td>
         <td>Turns usage of NHRP over IPsec for this Interface on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IP address</td>
         <td><span style="color: red;">IPsec instance</span></td>
        <td>IP; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
        <td>Network ID of NHRP</td>
         <td>Specifies which existing IPsec instance should be associated with this NHRP Interface. This field becomes visible only when IPsec support is set to 'on'.</td>
    </tr>
    <tr>
        <td>NBMA</td>
         <td>IP; default: <b>none</b></td>
         <td>IP address of Next-Hop Server</td>
     </tr>
     </tr>
</table>
</table>
Line 1,062: Line 1,261:
=====NHRP Mappings Configuration=====
=====NHRP Mappings Configuration=====
----
----
Below is an example of the <b>NHRP Mappings Configuration</b> section.  
The <b>NHRP Mappings Configuration</b> section is used to configure (map) associations between NHRP router IP address and NBMAs. Below is an example of the NHRP Mappings Configuration section which is empty by default. To add a new configuration, simply click the 'Add' button:


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_nhrp_mappings_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_nhrp_mappings_configuration_add_button_v2.png|border|class=tlt-border]]


To add a new configuration click the 'Add' button and it will appear in the 'NHRP Mappings Configuration' list.
The newly added configuration should appear in the NHRP Mappings Configuration list and look similar to this:


[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_nhrp_mappings_configuration_edit.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_routing_dynamic_routes_nhrp_interfaces_nhrp_mappings_configuration_edit_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 1,075: Line 1,274:
         <th>Value</th>
         <th>Value</th>
         <th>Description</th>
         <th>Description</th>
    </tr>
    <tr>
        <td>IP Address</td>
        <td>ip4; default: <b>none</b></td>
        <td>Network ID of another NHRP router.</td>
    </tr>
    <tr>
        <td>NBMA</td>
        <td>ip4; default: <b>none</b></td>
        <td>IP address of a Next-Hop server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enabled</td>
         <td>Enabled</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns this mapping configuration on or off.</td>
         <td>Turns this mapping configuration on or off.</td>
    </tr>
</table>
=====NHRP NHS Configuration=====
----
The NHRP uses next hop servers (NHS) to register. Below is an example of the NHRP NHS Configuration section which is empty by default. To add a new configuration, simply click the 'Add' button:
[[File:Networking rutos manual routing dynamic routes nhrp interfaces nhrp nhs configuration v1.png|border|class=tlt-border]]
The newly added configuration should appear in the NHRP NHS Configuration list and look similar to this:
[[File:Networking rutos manual routing dynamic routes nhrp interfaces nhrp nhs configuration add v1.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IP Address</td>
         <td>NHS IP Address</td>
         <td>ip; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>Network ID of another NHRP.</td>
         <td>Static Next Hop Server IP address.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>NBMA</td>
         <td>NBMA</td>
         <td>ip; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>IP address of next-hop server.</td>
         <td>Non-Broadcast Multi-Access(NBMA) network IP address of this NHS.</td>
    </tr>
    <tr>
        <td>Enabled</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Turns NHFRP NHS configuration on or off.</td>
     </tr>
     </tr>
</table>|}}
</table>|}}
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/73607...132013"