Changes

* When in the Firewall page, go to '''Port Forwarding''' tab. Scroll down to the bottom of the page and locate the '''New Port Forward Rule''' section. Make up a custom name for a new rule, set the following parameters:

* When in the Firewall page, go to '''Port Forwarding''' tab. Scroll down to the bottom of the page and locate the '''New Port Forward Rule''' section. Make up a custom name for a new rule, set the following parameters:

** Protocol: '''TCP+UDP'''

** Protocol: '''TCP+UDP'''

** External port(s): '''8888''' (camera's HTTP port as set in the [[Hikvision#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** External port(s): '''8888''' (camera's HTTP port as set in the [[Hikvision:_remote_camera_access#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** Internal IP: '''192.168.1.64''' (camera's IP as set in the [[Hikvision#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** Internal IP: '''192.168.1.64''' (camera's IP as set in the [[Hikvision:_remote_camera_access#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** Internal port(s): '''8888'''

** Internal port(s): '''8888'''

[[File:Setting port forwarding.png]]

[[File:Setting port forwarding.png]]

----

----

* If you plan viewing the camera's live stream via some sort of media player (for example, VLC), you should configure an additional Port Forwarding rule. Media players like VLC use the '''RTSP''' protocol. You can check the RTSP port in the camera's WebUI (as discussed in the [[Hikvision#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article), but the RTSP default port is always '''554''' and there is no need to change it since by default the router doesn't use this port for any of its services (unless you use for some custom configuration. In that case, change the default RTSP port). So, once again make up a custom name for a new rule and set the following parameters:

* If you plan viewing the camera's live stream via some sort of media player (for example, VLC), you should configure an additional Port Forwarding rule. Media players like VLC use the '''RTSP''' protocol. You can check the RTSP port in the camera's WebUI (as discussed in the [[Hikvision:_remote_camera_access#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article), but the RTSP default port is always '''554''' and there is no need to change it since by default the router doesn't use this port for any of its services (unless you use for some custom configuration. In that case, change the default RTSP port). So, once again make up a custom name for a new rule and set the following parameters:

** Protocol: '''TCP+UDP'''

** Protocol: '''TCP+UDP'''

** External port(s): '''554''' (camera's RTSP port)

** External port(s): '''554''' (camera's RTSP port)

** Internal IP: '''192.168.1.64''' (camera's IP as set in the [[Hikvision#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** Internal IP: '''192.168.1.64''' (camera's IP as set in the [[Hikvision:_remote_camera_access#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]] section of this article)

** Internal port(s): '''554'''

** Internal port(s): '''554'''

[[File:Vlc network player.png]]

[[File:Vlc network player.png]]

'''NOTE''': make sure that you have configured the necessary RTSP Port Forwarding rule as described in section '''[[Hikvision#Step_3:_Configure_Port_Forwarding|2.3.3]]''' of this article. And don't forget to specify the correct RTSP port, which can be viewed and changed in the camera's WebUI as described in the '''[[Hikvision#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]]''' section of this article (if you haven't made changes to the RTSP port, it will be '''554''' by default).

'''NOTE''': make sure that you have configured the necessary RTSP Port Forwarding rule as described in section '''[[Hikvision#Step_3:_Configure_Port_Forwarding|2.3.3]]''' of this article. And don't forget to specify the correct RTSP port, which can be viewed and changed in the camera's WebUI as described in the '''[[Hikvision:_remote_camera_access#Camera.27s_Web_User_Interface_.28WebUI.29|2.2.2]]''' section of this article (if you haven't made changes to the RTSP port, it will be '''554''' by default).

===Web browser===

===Web browser===