Jump to content
  • EN

Template:Networking rutos manual wan: Difference between revisions

Template:Networking rutos manual wan (view source)

Revision as of 14:10, 4 June 2021

9,519 bytes removed ,  4 June 2021
no edit summary
VisualWikitext
No edit summary
No edit summary
Line 36: Line 36:


{{#ifeq: {{{wired}}} | 1 |   
{{#ifeq: {{{wired}}} | 1 |   
===Wired WAN===
----
This section covers all parameters directly related to a <b>wired (Ethernet) WAN</b> interface.


====General Setup====
===Static===
----
----
The <b>General Setup</b> section is used to configure the protocol and all the different parameters that go along with each protocol. This section is different for each protocol.
The <b>static address</b> protocol uses a predefined manual configuration instead of obtaining parameters automatically via a DHCP lease.  


=====General Setup: Static address=====
====Static: General Settings====
----
----
The <b>static address</b> protocol uses a predefined manual configuration instead of obtaining parameters automatically via a DHCP lease.
[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_static_address.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_static_address.png|border|class=tlt-border]]


Line 78: Line 73:
</table>
</table>


=====General Setup: DHCP client=====
====Static: DHCP Server====
----
The <b>DHCP client</b> protocol is used to set up an interface which obtains its configuration parameters automatically via a DHCP lease.
 
[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_dhcp_client.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Hostname to send when requesting DHCP</td>
      <td>string; default: <b>none</b></td>
      <td>A hostname for this interface used to identify this machine on the DHCP server.</td>
    </tr>
</table>
 
=====General Setup: DHCPv6 client=====
----
----
The <b>DHCPv6 client</b> protocol is used to set up an IPv6 interface which obtains its configuration parameters automatically via a DHCP lease.
The <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.


[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_dhcpv6_client.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_general_setup_lan_{{{lan}}}.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Request IPv6-address</td>
      <td>try <nowiki>|</nowiki> force <nowiki>|</nowiki> disabled; default: <b>try</b></td>
      <td>Defines the behaviour for requesting an address.</td>
    </tr>
    <tr>
      <td>Request IPv6-prefix of length</td>
      <td>integer [0..64] <nowiki>|</nowiki> Automatic <nowiki>|</nowiki> disabled ; default: <b>Automatic</b></td>
      <td>Defines how this will request a IPv6 ULA-Prefix length. If set to 'disabled' the interface will obtain a single IPv6 address without a subnet for routing.</td>
    </tr>
</table>
 
=====General Setup: PPPoE=====
----
The <b>PPPoE</b> protocol is used to set up a PPP (Point-to-Point Protocol) connection over the Ethernet port{{#ifeq:{{{series}}}|TRB1| (in the case for {{{name}}}: an Ethernet connection simulated over the USB port)|}}.
 
[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_pppoe.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 134: Line 86:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>PAP/CHAP username</td>
         <td>Enable DHCP</td>
         <td>string; default: <b>none</b></td>
         <td>Enable | Disable | DHCP Relay<span class="asterisk">*</span>; default: <b>Enable</b></td>
         <td>Username used in PAP/CHAP authentication.</td>
         <td>Turns the DHCP server on or off or enables DHCP relay<span class="asterisk">*</span>.<br>If DHCP Relay<span class="asterisk">*</span> is selected, you will be prompted to enter an IP address of another DHCP server in your LAN. In this case, whenever a new machine connects to this device, it will redirect any DHCP requests to the specified DHCP Server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>PAP/CHAP password</td>
         <td>Start</td>
         <td>string; default: <b>none</b></td>
         <td>integer [1..255]; default: <b>100</b></td>
         <td>Password used in PAP/CHAP authentication.</td>
         <td>The starting IP address value. e.g., if your device’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
     </tr>
     </tr>
</table>
====Advanced Settings====
----
The <b>Advanced Settings</b> section is used to set up some of the more specific and less frequently used interface parameters. This section is different for each protocol.
=====Advanced Settings: Static address=====
----
<b>Advanced Settings</b> information for <b>Static</b> protocol is provided in the table below.
[[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_static_address.png|border|class=tlt-border]]
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <td>Limit</td>
         <th>Value</th>
         <td>integer [1..255]; default: <b>150</b></td>
         <th>Description</th>
         <td>How many addresses the DHCP server can lease out. Continuing from the example above: if the start address is 192.168.1.100 and the server can lease out 150 addresses, available addresses will be from 192.168.1.<b>100</b> to 192.168.1.<b>249</b> (<i>100 + 150 – 1 = 249</i>; this is because the first address is inclusive).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Override MAC address</td>
         <td>Lease time</td>
         <td>mac; default: <b>none</b></td>
         <td>integer [1..999999]; default: <b>12</b></br>integer [2..999999]<span class="asterisk">*</span></br>integer [120..999999]<span class="asterisk">**</span></td>
         <td>When set, uses a user-defined MAC address for the interface.</td>
         <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</br><span class="asterisk">*</span>If selected Units is Minutes.</br><span class="asterisk">**</span>If selected Units is seconds.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Override MTU</td>
         <td>Units</td>
         <td>integer [1..9200]; default: <b>none</b></td>
         <td>Hours | Minutes | Seconds; default: <b>Hours</b></td>
         <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
         <td>Lease time units.</td>
    </tr>
    <tr>
        <td>Use gateway metric</td>
        <td>integer; default: <b>0</b></td>
        <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
     </tr>
     </tr>
</table>
</table>


<span class="asterisk">*</span> When an interface is set to act as a DHCP Relay, it redirects all received DHCP request messages to another specified DHCP server:


=====Advanced Settings: DHCP client=====
[[File:Networking_rutx_manual_lan_static_dhcp_server_relay_scheme_v2.png]]
----
<b>Advanced Settings</b> information for <i>DHCP</i> protocol is provided in the table below.


[[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_dhcp_client.png|border|class=tlt-border]]
===DHCP===
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Use default gateway</td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>When enabled, add a default route for this interface.</td>
    </tr>
    <tr>
        <td>Use DNS servers advertised by peer</td>
        <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
    </tr>
    <tr>
        <td><span style="color: red;">Use custom DNS servers</span></td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
    </tr>
    <tr>
        <td>Use gateway metric</td>
        <td>integer; default: <b>0</b></td>
        <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
    </tr>
    <tr>
        <td>Override MAC address</td>
        <td>mac; default: <b>none</b></td>
        <td>Override MAC address of the WAN interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your device). In this field you can enter your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer.</td>
    </tr>
    <tr>
        <td>Override MTU</td>
        <td>integer [1..9200]; default: <b>none</b></td>
        <td>Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
    </tr>
</table>
 
=====Advanced Settings: DHCPv6 client=====
----
----
<b>Advanced Settings</b> information for <i>DHCPv6</i> protocol is provided in the table below.
The <b>DHCP client</b> protocol is used to set up an interface which obtains its configuration parameters automatically via a DHCP lease.


[[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_dhcpv6_client.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wan_wan_configuration_general_setup_dhcp_client.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <th>Field</th>
        <th>Value</th>
      <th>Value</th>
        <th>Description</th>
      <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Use default gateway</td>
      <td>Hostname to send when requesting DHCP</td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
      <td>string; default: <b>none</b></td>
        <td>When enabled, add a default route for this interface.</td>
      <td>A hostname for this interface used to identify this machine on the DHCP server.</td>
    </tr>
    <tr>
        <td>Use DNS servers advertised by peer</td>
        <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
    </tr>
    <tr>
        <td><span style="color: red;">Use custom DNS servers</span></td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
    </tr>
    <tr>
        <td>Override MAC address</td>
        <td>mac; default: <b>none</b></td>
        <td>When set, uses a user-defined MAC address for the interface.</td>
    </tr>
    <tr>
        <td>Override MTU</td>
        <td>integer [1..9200]; default: <b>none</b></td>
        <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
    <tr>
</table>
 
=====Advanced Settings: PPPoE=====
----
<b>Advanced Settings</b> information for <i>PPPoE</i> protocol is provided in the table below.
 
[[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_pppoe.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Obtain IPv6 address</td>
        <td>Automatic <nowiki>|</nowiki> Disabled <nowiki>|</nowiki> Manual; default: <b>Automatic</b></td>
        <td>Defines behaviour for obtaining an IPv6 address.</td>
    </tr>
    <tr>
        <td>Use default gateway</td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>When enabled, add a default route for this interface.</td>
    </tr>
    <tr>
        <td>Use gateway metric</td>
        <td>integer; default: <b>0</b></td>
        <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
    </tr>
    <tr>
        <td>Use DNS servers advertised by peer</td>
        <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
    </tr>
    <tr>
        <td><span style="color: red;">Use custom DNS servers</span></td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
    </tr>
    <tr>
        <td>Override MTU</td>
        <td>integer [1..1500]; default: <b>none</b></td>
        <td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td>
     </tr>
     </tr>
</table>
</table>
====DHCP Server: IPv6 Settings====
----
Refer to the table below for information on the <b>IPv6 Settings</b> section.
[[File:Networking_rutos_manual_wan_wan_configuration_dhcp_server_ipv6_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Router Advertisement-Service</td>
        <td>Disabled <nowiki>|</nowiki> Relay mode <nowiki>|</nowiki> Server mode <nowiki>|</nowiki> Hybrid mode; default: <b>Disabled</b></td>
        <td>Specifies whether router advertisements should be enabled (server mode), relayed or disabled. </td>
    </tr>
    <tr>
        <td>DHCPv6-Service</td>
        <td>Disabled <nowiki>|</nowiki> Relay mode <nowiki>|</nowiki> Server mode <nowiki>|</nowiki> Hybrid mode; default: <b>Disabled</b></td>
        <td>Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled).</td>
    </tr>
    <tr>
        <td>NDP Proxy</td>
        <td>Disabled <nowiki>|</nowiki> Relay mode <nowiki>|</nowiki> Hybrid mode; default: <b>Disabled</b></td>
        <td>Specifies whether NDP should be relayed or disabled.</td>
    </tr>
    <tr>
        <td>Announced DNS server</td>
        <td>ip; default: <b>none</b></td>
        <td>Supplements DHCP-assigned DNS server entries with ones specified in this field.</td>
    </tr>
    <tr>
        <td>Announced DNS domains</td>
        <td>ip; default: <b>none</b></td>
        <td>DNS domain handed out to DHCP clients.</td>
    </tr>
</table>|}}
{{#ifeq: {{{mobile}}} | 1 |  
{{#ifeq: {{{mobile}}} | 1 |  
===Mobile WAN===
===Mobile===
----
----
This section covers all parameters directly related to a <b>mobile WAN</b> interface.
The Mobile protocol is used to set up an interface which can establish a mobile WAN connection.  


====General Setup: Mobile====
====Mobile: General Settings====
----
----
The <b>General Setup</b> section is used to configure the main parameters of a mobile WAN connection.
[[File:Networking_rutos_manual_wan_mobile_configuration_general_setup_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wan_mobile_configuration_general_setup_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}.png|border|class=tlt-border]]


Line 415: Line 203:
</table>
</table>


====Advanced Settings: Mobile====
====Mobile: Mobile Data Limit====
----
<b>Advanced Settings</b> information for <i>mobile</i> WAN is provided in the table below.
 
[[File:Networking_rutos_manual_wan_mobile_configuration_advanced_settings_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Use DNS servers advertised by peer</td>
        <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
    </tr>
    <tr>
        <td><span style="color: red;">Use custom DNS servers</span></td>
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
    </tr>{{#ifeq: {{{dualsim}}} | 1 |
    <tr>
        <td>Use gateway metric</td>
        <td>integer; default: <b>1</b></td>
        <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
    </tr>
    <tr>
        <td>Override MTU</td>
        <td>integer [1..9200]; default: <b>none</b></td>
        <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
    </tr>|}}
</table>
 
====Mobile Data Limit====
----
----
The <b>Mobile Data Limit</b> section provides you with the possibility to set data usage limits for your mobile network interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges.
The <b>Mobile Data Limit</b> section provides you with the possibility to set data usage limits for your mobile network interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges.
Line 503: Line 257:
     </tr>
     </tr>
</table>|}}
</table>|}}
|}}
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/80731"