Jump to content
  • EN

Template:Networking rutos manual administration: Difference between revisions

Template:Networking rutos manual administration (view source)

Revision as of 15:06, 8 June 2021

806 bytes removed ,  8 June 2021
no edit summary
VisualWikitext
No edit summary
No edit summary
Line 189: Line 189:


[[File:Networking_rutos_manual_administration_access_control_root_ca.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_administration_access_control_root_ca.png|border|class=tlt-border]]
==Troubleshoot==
===Logging Settings===
----
The <b>Logging Settings</b> section is used to configure how and where the device stores system log data. The system log is a file that contains information on various system related events and is useful to engineers for troubleshooting the device.
[[File:Networking_rutos_manual_administration_troubleshoot_logging_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>System log buffer size</td>
      <td>integer; default: <b>128</b></td>
      <td>System log buffer size in kibibytes (KiB).</td>
    </tr>
    <tr>
      <td>External system log server</td>
      <td>ip; default: <b>none</b></td>
      <td>IP address of an external server that will be used to store device logs.</td>
    </tr>
    <tr>
      <td>External system log server port</td>
      <td>integer [0..65535]; default: <b>none</b></td>
      <td>TCP/UDP port number of the external log server.</td>
    </tr>
    <tr>
      <td>External system log server protocol</td>
      <td>UDP | TCP; default: <b>UDP</b></td>
      <td>Communication protocol used by the external log server.</td>
    </tr>
    <tr>
      <td>Save log in</td>
      <td>RAM memory | Flash memory; default: <b>RAM memory</b></td>
      <td>Specifies which type of memory to use for storing system logs.</td>
    </tr>
</table>
===Troubleshoot===
----
The <b>Troubleshoot</b> section is used to download various files that contain information used for troubleshooting the device. Refer to the figure and table below for information on the Troubleshoot page.
[[File:Networking_rutos_manual_administration_troubleshoot_troubleshoot.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>System log</td>
        <td>- (interactive button)</td>
        <td>Displays the contents of the device system log file. The system log contains records of various system related events, such as starts/stops of various services, errors, reboots, etc.</td>
    </tr>
    <tr>
        <td>Kernel log</td>
        <td>- (interactive button)</td>
        <td>Displays the contents of the device kernel log file. The kernel log contains records of various events related to the processes of the operating system (OS).</td>
    </tr>
    <tr>
        <td>Troubleshoot file</td>
        <td>- (interactive button)</td>
        <td>Downloads the device Troubleshoot file. It contains the device configuration information, logs and some other files. When requesting support, it is recommended to always provide the device Troubleshoot file to Teltonika engineers for analysis.</td>
    </tr>
    <tr>
        <td>TCP dump file</td>
        <td>- (interactive button)</td>
        <td>Downloads the device TCP dump file. TCP dump is a program used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.</td>
    </tr>
    <tr>
        <td>Enable TCP dump<span class="asterisk">*</span></td>
        <td>off | on; default: <b>off</b></td>
        <td>Turns TCP dump packets capture on or off.</td>
    </tr>
</table>
<font size="-1"><span class="asterisk">*</span> More on TCP dump in the [[#TCP_dump|next section]].</font>
====TCP dump====
----
<b>TCP dump</b> is a program used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.
If you enable TCP dump, you will notice additional configuration fields appear. Refer to the figure and table below for realted information.
[[File:Networking_rutos_manual_administration_troubleshoot_tcp_dump.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Enable TCP dump</td>
        <td>off | on; default: <b>off</b></td>
        <td>Turns TCP dump packet capture on or off.</td>
    </tr>
    <tr>
        <td>Select interface</td>
        <td>network interface; default: '''br-lan'''</td>
        <td>Only captures packets that move through the specified network interface.</td>
    </tr>
    <tr>
        <td>Select protocol filter</td>
        <td>all | icmp | tcp | udp | arp; default: <b>All</b></td>
        <td>Only captures packets that match the specified protocol.</td>
    </tr>
    <tr>
        <td>Select packets direction</td>
        <td>Incoming/Outgoing | Incoming | Outgoing; default: <b>Incoming/Outgoing</b></td>
        <td>Only captures packets coming from the specified direction.</td>
    </tr>
    <tr>
        <td>Host</td>
        <td>ip | host; default: <b>none</b></td>
        <td>Only captures packets related to the specified host.</td>
    </tr>
    <tr>
        <td>Port</td>
        <td>integer [0..65335]; default: <b>none</b></td>
        <td>Only captures packets related to the specified communication port.</td>
    </tr>
    <tr>
        <td>Select storage</td>
        <td>Internal storage | / ; default: <b>Internal storage</b></td>
        <td>Specifies where the TCP dump file will be stored.</td>
    </tr>
</table>
===Diagnostics===
----
The <b>Diagnostics</b> section is used to execute simple network diagnostic tests, including <i>ping</i>, <i>traceroute</i> and <i>nslookup</i>.
[[File:Networking_rutos_manual_administration_troubleshoot_diagnostics.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Method</td>
      <td>Ping | Traceroute | Nslookup; default: <b>Ping</b></td>
      <td>Selects diagnostic method.
            <ul>
                <li><b>Ping</b> - sends ICMP requests to the specified address.</li>
                <li><b>Traceroute</b> - displays the path that packets have to take in order to reach the specified address.</li>
                <li><b>Nslookup</b> - obtains domain name address and IP address mapping information.</li>
            </ul>
        </td>
    </tr>
    <tr>
      <td>Protocol</td>
      <td>IPv4 | IPv6; default: <b>IPv4</b></td>
      <td>Selects IP address family for diagnostic test.</td>
    </tr>
    <tr>
      <td>Address</td>
      <td>ip | host; default: <b>none</b></td>
      <td>IP address or hostname on which the diagnostic test will be performed.</td>
    </tr>
    <tr>
        <td>Perform</td>
      <td>-(interactive button)</td>
      <td>Performs diagnostic test when clicked.</td>
    </tr>
</table>


==Recipients==
==Recipients==
Line 461: Line 288:
     </tr>
     </tr>
</table>
</table>
==Overview setup==
The <b>Overview setup</b> section is used to select which widgets will be shown in the [[{{{name}}}_Overview|Overview]] window.
{{#switch:{{{series}}}
| RUTX = {{#switch:{{{name}}}
        | RUTX10 = [[File:Networking_rutx10_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
        | RUTX08 = [[File:Networking_rutx10_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
        | [[File:Networking_rutx11_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
        }}
| TRB2 = [[File:Networking_trb2_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
| TRB1 = [[File:Networking_trb1_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
| RUT36X = [[File:Networking_trb1_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
| RUT30X = [[File:Networking_rut30x_manual_administration_overview_setup_v1.png|border|class=tlt-border]]
}}


==Certificates==
==Certificates==
Line 642: Line 454:
The 'Export' buttons are used to download the files from the device onto your local machine. The 'X' buttons located to the right of each entry are used to delete related files.
The 'Export' buttons are used to download the files from the device onto your local machine. The 'X' buttons located to the right of each entry are used to delete related files.


==Unsaved changes==
==Troubleshoot==
 
===Logging Settings===
----
The <b>Logging Settings</b> section is used to configure how and where the device stores system log data. The system log is a file that contains information on various system related events and is useful to engineers for troubleshooting the device.
 
[[File:Networking_rutos_manual_administration_troubleshoot_logging_settings.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>System log buffer size</td>
      <td>integer; default: <b>128</b></td>
      <td>System log buffer size in kibibytes (KiB).</td>
    </tr>
    <tr>
      <td>External system log server</td>
      <td>ip; default: <b>none</b></td>
      <td>IP address of an external server that will be used to store device logs.</td>
    </tr>
    <tr>
      <td>External system log server port</td>
      <td>integer [0..65535]; default: <b>none</b></td>
      <td>TCP/UDP port number of the external log server.</td>
    </tr>
    <tr>
      <td>External system log server protocol</td>
      <td>UDP | TCP; default: <b>UDP</b></td>
      <td>Communication protocol used by the external log server.</td>
    </tr>
    <tr>
      <td>Save log in</td>
      <td>RAM memory | Flash memory; default: <b>RAM memory</b></td>
      <td>Specifies which type of memory to use for storing system logs.</td>
    </tr>
</table>
 
===Troubleshoot===
----
The <b>Troubleshoot</b> section is used to download various files that contain information used for troubleshooting the device. Refer to the figure and table below for information on the Troubleshoot page.
 
[[File:Networking_rutos_manual_administration_troubleshoot_troubleshoot.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>System log</td>
        <td>- (interactive button)</td>
        <td>Displays the contents of the device system log file. The system log contains records of various system related events, such as starts/stops of various services, errors, reboots, etc.</td>
    </tr>
    <tr>
        <td>Kernel log</td>
        <td>- (interactive button)</td>
        <td>Displays the contents of the device kernel log file. The kernel log contains records of various events related to the processes of the operating system (OS).</td>
    </tr>
    <tr>
        <td>Troubleshoot file</td>
        <td>- (interactive button)</td>
        <td>Downloads the device Troubleshoot file. It contains the device configuration information, logs and some other files. When requesting support, it is recommended to always provide the device Troubleshoot file to Teltonika engineers for analysis.</td>
    </tr>
    <tr>
        <td>TCP dump file<span class="asterisk">*</span></td>
        <td>- (interactive button)</td>
        <td>Downloads the device TCP dump file. TCP dump is a program used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.</td>
    </tr>
    <tr>
        <td>Enable TCP dump<span class="asterisk">*</span></td>
        <td>off | on; default: <b>off</b></td>
        <td>Turns TCP dump packets capture on or off.</td>
    </tr>
</table>
 
<font size="-1"><span class="asterisk">*</span> As of {{{fw_version}}}, TCPdump is not part of core functionality anymore. To see these options, the TCPdump package must be downloaded from [[{{{name}}}_Package_Manager|Package Manager]].</font>
 
====TCP dump====
----
<b>TCP dump</b> is an <i>optional</i> downloadable functionality<span class="asterisk">*</span> used to capture packets moving through network interfaces. By default, the device does not store TCP dump information. You must enable TCP dump and save the changes before you can download the file.
 
If you enable TCP dump, you will notice additional configuration fields appear. Refer to the figure and table below for realted information.
 
<font size="-1"><span class="asterisk">*</span> You can download the TCPdump package from [[{{{name}}}_Package_Manager|Package Manager]].</font>
 
[[File:Networking_rutos_manual_administration_troubleshoot_tcp_dump.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Enable TCP dump</td>
        <td>off | on; default: <b>off</b></td>
        <td>Turns TCP dump packet capture on or off.</td>
    </tr>
    <tr>
        <td>Select interface</td>
        <td>network interface; default: '''br-lan'''</td>
        <td>Only captures packets that move through the specified network interface.</td>
    </tr>
    <tr>
        <td>Select protocol filter</td>
        <td>All | ICMP | TCP | UDP | ARP; default: <b>All</b></td>
        <td>Only captures packets that match the specified protocol.</td>
    </tr>
    <tr>
        <td>Select packets direction</td>
        <td>Incoming/Outgoing | Incoming | Outgoing; default: <b>Incoming/Outgoing</b></td>
        <td>Only captures packets coming from the specified direction.</td>
    </tr>
    <tr>
        <td>Host</td>
        <td>ip | host; default: <b>none</b></td>
        <td>Only captures packets related to the specified host.</td>
    </tr>
    <tr>
        <td>Port</td>
        <td>integer [0..65335]; default: <b>none</b></td>
        <td>Only captures packets related to the specified communication port.</td>
    </tr>
    <tr>
        <td>Select storage</td>
        <td>RAM memory; default: <b>RAM memory</b></td>
        <td>Specifies where the TCP dump file will be stored.</td>
    </tr>
</table>
 
===Diagnostics===
----
The <b>Diagnostics</b> section is used to execute simple network diagnostic tests, including <i>ping</i>, <i>traceroute</i> and <i>nslookup</i>.


The <b>Unsaved changes</b> section is used to see and apply or revert all unsaved changes.
[[File:Networking_rutos_manual_administration_troubleshoot_diagnostics.png|border|class=tlt-border]]


[[File:Networking_rutos_manual_administration_unsaved_changes.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Method</td>
      <td>Ping | Traceroute | Nslookup; default: <b>Ping</b></td>
      <td>Selects diagnostic method.
            <ul>
                <li><b>Ping</b> - sends ICMP requests to the specified address.</li>
                <li><b>Traceroute</b> - displays the path that packets have to take in order to reach the specified address.</li>
                <li><b>Nslookup</b> - obtains domain name address and IP address mapping information.</li>
            </ul>
        </td>
    </tr>
    <tr>
      <td>Protocol</td>
      <td>IPv4 | IPv6; default: <b>IPv4</b></td>
      <td>Selects IP address family for diagnostic test.</td>
    </tr>
    <tr>
      <td>Address</td>
      <td>ip | host; default: <b>none</b></td>
      <td>IP address or hostname on which the diagnostic test will be performed.</td>
    </tr>
    <tr>
        <td>Perform</td>
      <td>-(interactive button)</td>
      <td>Performs diagnostic test when clicked.</td>
    </tr>
</table>


[[Category:{{{name}}} System section]]
[[Category:{{{name}}} System section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/80816"