Line 3: |
Line 3: |
| | name = TRB255 | | | name = TRB255 |
| | series = TRB2 | | | series = TRB2 |
− | <!-----------------------LATEST FW--------------------->
| |
− | | latest_fw = TRB2_R_00.07.00
| |
− | | latest_date = 2021.07.16
| |
− | | latest_md5 = e7cf046e9cc42347872956dcdf86f996
| |
− | <!-----------------------FACTORY FW-------------------->
| |
− | | factory_fw = TRB2_R_00.02.06.1
| |
− | | factory_date = 2021.02.10
| |
− | | factory_md5 = 94a80b45777b155823029982cb31560e
| |
| }} | | }} |
| | | |
| ==Changelog== | | ==Changelog== |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.04.3_WEBUI.bin|TRB2_R_00.07.04.3]]</b> | 2023.05.11=== |
| + | |
| + | * <b>Improvement</b> |
| + | ** <b>System</b> |
| + | *** Optimized firmware image size |
| + | *** Removed SSH RSA key generation |
| + | *** Added SSH ECDSA key generation |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch |
| + | *** Removed unsupported B39 band |
| + | ** <b>Services</b> |
| + | *** Fixed incorrect mobile data usage provided to RMS service |
| + | ** <b>System</b> |
| + | *** Fixed an issue on bootloader web recovery hanging with certain firmware sizes |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.04.2_WEBUI.bin|TRB2_R_00.07.04.2]]</b> | 2023.04.18=== |
| + | |
| + | * <b>New</b> |
| + | ** nftables support |
| + | |
| + | * <b>Improvement</b> |
| + | ** <b>Network</b> |
| + | *** Added PDP profile registry and LTE SMS format functions & management for the Verizon network |
| + | *** Improved SIM detection algorithm |
| + | *** Improved Multi-APN connection establishment time |
| + | ** <b>WebUI</b> |
| + | *** Improved Overview page performance |
| + | ** <b>System</b> |
| + | *** Changed hostname to router name |
| + | *** Updated OpenSSL to version 1.1.1t |
| + | *** Updated CA certificates to version 20211016 |
| + | *** Updated libiwinfo to version 2022-08-19 |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed IPv4, IPv6 mobile connection restarts |
| + | *** Fixed operator scanning when mobile interface is disabled |
| + | *** Fixed data limit and tracking when software flow offloading is enabled |
| + | *** Added network reload call before bringing the mobile interface up |
| + | *** Fixed a segmentation fault issue which would occur occasionally when switching between SIM cards |
| + | *** Fixed Port-based VLAN ID calculation issue |
| + | *** Fixed PDP context authentication when using special characters |
| + | ** <b>Services</b> |
| + | *** Fixed event text for configurable inputs/outputs on I/O Juggler |
| + | *** Fixed I/O PIN3 value not changing via MODBUS TCP |
| + | *** Added I/O status request error handling in various WebUI pages when the I/O service is booting up |
| + | *** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization |
| + | *** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters |
| + | *** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes |
| + | *** Fixed OpenVPN keep alive setting migration issue |
| + | *** Fixed PPTP server name setting migration issue |
| + | *** Fixed RS485 2nd stop bit support |
| + | *** Fixed missing WebUI issue caused by Email Relay installation |
| + | *** Fixed NTP's Operator Station Synchronization memory leak issue |
| + | *** Fixed test email validation |
| + | ** <b>System</b> |
| + | *** Fixed libcares vulnerability CVE-2022-4904 |
| + | *** Fixed frr vulnerability CVE-2022-37035 |
| + | *** Removed ability for non root users to edit scripts that get executed as root |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.04.1_WEBUI.bin|TRB2_R_00.07.04.1]]</b> | 2023.03.24=== |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed Data Limit issue |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.04_WEBUI.bin|TRB2_R_00.07.04]]</b> | 2023.03.07=== |
| + | |
| + | * <b>Improvements</b> |
| + | ** <b>WebUI</b> |
| + | *** Improved data persistence between page refreshes |
| + | *** Improved page navigation behavior |
| + | *** Improved redirect logic to open configuration edit modals |
| + | *** Updated the 'Status -> Mobile' page |
| + | *** Updated interface card in the Overview page |
| + | *** Separated Sent and Received data bars on the chart in the Mobile Usage page |
| + | ** <b>Network</b> |
| + | *** Added an info message displayed when a faulty SIM card is inserted |
| + | *** Added ResIOT operator's APNs to the APN database |
| + | *** Improved mobile connection re-establishment after reboot |
| + | *** Improved mobile connection recovery in cases where it was lost unexpectedly |
| + | *** Improved 'Deny data roaming' operation when switching between operators |
| + | ** <b>Services</b> |
| + | *** Added MQTT support to I/O Juggler |
| + | *** Added support for new NMEA sentences: GARMC, GAGGA, GAGSA, GAVTG, GBGSV, GBGSA, GQGSV, GQGSA |
| + | *** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted |
| + | *** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule |
| + | *** Added argument support for the 'Execute custom script' SMS rule |
| + | *** Added a frequency option 'schedule' Modbus Master |
| + | *** Added pagination to Events Reporting overview |
| + | *** Added limit to Events Reporting rule list |
| + | *** Added email logging for Events reporting |
| + | *** 'Sync with browser' button in the NTP page now also synchronizes the time zone |
| + | *** Added a limit of 30 for NTP instances |
| + | *** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically |
| + | *** Added "make before break" option to IPsec configuration |
| + | *** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway |
| + | *** Improved MODBUS Master connection handling to reduce connection count |
| + | *** Updated modbus request error messages |
| + | *** Added OpenVPN server ip block support |
| + | *** Added MQTT support for MODBUS Master alarms |
| + | *** Added the possibility to get the device's Ethernet port data via SNMP |
| + | *** Improved error messages in the Serial Utilities page |
| + | ** <b>System</b> |
| + | *** Updated bash to version 5.1.16 |
| + | *** Added detailed FW update failure error message to Events Log |
| + | *** Improved firmware upload/validation error messages |
| + | *** Updated Turkish language support |
| + | *** Added protocol column to IP block page |
| + | *** Added "vpns.log" file to the Troubleshoot package |
| + | *** Added Wireguard tunnel information to the Troubleshoot package |
| + | *** Updated default admin group access rights |
| + | *** Updated DFOTA notification to show "More info" only when the update is forced |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>WebUI</b> |
| + | *** Fixed MAC address showing on mobile interfaces |
| + | *** Fixed mobile cell ID displaying in hexadecimal |
| + | *** Fixed mobile data limit card creation in the Overview page |
| + | *** Fixed modem widget disappearing from the Overview page |
| + | *** Fixed Services page not displaying data after Thingworx package is installed |
| + | *** Added DNP3 to the 'Status > Services' page |
| + | ** <b>Network</b> |
| + | *** Fixed interface priority change issue |
| + | *** Fixed a Custom Firewall Rule editing issue |
| + | *** Fixed DMZ configuration saving while it is disabled |
| + | *** Fixed Port Scan script execution failure |
| + | *** Fixed Firewall zone duplication issue |
| + | *** Fixed call function when VoLTE is disabled |
| + | *** Fixed VoLTE control when IMS is not enabled |
| + | *** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address |
| + | *** Fixed APN authentication when using empty credentials |
| + | *** Fixed manual APN selection from list |
| + | ** <b>Services</b> |
| + | *** Fixed I/O Scheduler overlapping instances issue |
| + | *** Fixed Input/Output image pin colors |
| + | *** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active |
| + | *** Fixed disappearing GPS NMEA and HTTPS fields |
| + | *** Fixed unused NTRIP option deletion on NMEA source change |
| + | *** Fixed DNP3 serial master not working when Stop bits are set to 2 |
| + | *** Fixed DNP3 requests not deleting along with instance |
| + | *** Fixed DNP3 memory leak occurring after spamming the test request button |
| + | *** Fixed Serial Over IP related Firewall rule setting |
| + | *** Added limitations on message size and quantity of email messages in Email to SMS |
| + | *** Fixed SMTP HELLO value parsing issue |
| + | *** Fixed SMS message window reset button |
| + | *** Fixed not being able to save empty 'Message text' field in Auto Reply |
| + | *** Fixed multi-part SMS concatenation |
| + | *** Fixed multi-part SMS processing |
| + | *** Fixed SMS error message on 'Mobile Data Reset' action |
| + | *** Fixed Data To Server JSON format %n, %N and %s flag issues |
| + | *** Fixed Events Reporting email data clean |
| + | *** Fixed Events Reporting missing config selections |
| + | *** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom |
| + | *** Fixed IPsec instance deletion after removing DMVPN package |
| + | *** Fixed IPSec migration via Backup file when DMVPN is configured |
| + | *** Fixed IPsec naming issue when the includes an equals sign |
| + | *** Fixed L2TP client to use correct interface on failover events |
| + | *** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client |
| + | *** Fixed MODBUS database size limiting issue |
| + | *** Fixed MODBUS MQTT Gateway client ID input |
| + | *** Fixed MODBUS TCP Slave RSSI value |
| + | *** Fixed MODBUS test button returning errors when several non-connected devices are configured |
| + | *** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones |
| + | *** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected |
| + | *** Fixed OpenVPN Static Key configuration saving by making Static key upload required |
| + | *** Fixed OpenVPN TLS client creation issue while LAN is down |
| + | *** Fixed Package Manager displaying non-existent packages |
| + | *** Fixed Package Manager errors showing up after successful installations |
| + | *** Fixed Periodic Reboot entry duplication after a power cycle |
| + | *** Fixed PPTP 'Client to client' option not being applied after save |
| + | *** Fixed receiving excessive device state emails after a reboot is initialized over RMS |
| + | *** Fixed WebUI unavailability after unsuccessful package install |
| + | ** <b>System</b> |
| + | *** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929 |
| + | *** Fixed bash vulnerability CVE-2022-3715 |
| + | *** Fixed CGI-IO file download vulnerability CVE-2022-38333 |
| + | *** Fixed libxml2 vulnerability CVE-2022-40304 |
| + | *** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552 |
| + | *** Fixed LED indications for 4G NB and M1 modes |
| + | *** Improved file upload logic |
| + | *** Fixed GPL firmware compilation with selected Tinc package |
| + | *** Fixed OpenVPN Static Key migration via keep settings issue |
| + | *** Fixed NTP time zone name setting migration when the name contains whitespaces |
| + | *** Fixed language setting issue |
| + | *** Fixed integer validation on industrial services |
| + | *** Fixed LED indications when PDP type is IPv6 |
| + | *** Fixed issues with PDP type and SMS limit period migration via keep settings |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.03.4_WEBUI.bin|TRB2_R_00.07.03.4]]</b> | 2023.02.09=== |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Changed generic modem restart method |
| + | *** Fixed mobile page VoLTE switching issues |
| + | ** <b>Services</b> |
| + | *** Sanitized tcpdump storage location |
| + | ** <b>System</b> |
| + | *** Fixed CVE-2023-32349 vulnerability |
| + | |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.03.2_WEBUI.bin|TRB2_R_00.07.03.2]]</b> | 2023.01.13=== |
| + | |
| + | * <b>New</b> |
| + | ** <b>System</b> |
| + | *** Japanese language |
| + | |
| + | * <b>Improvements</b> |
| + | ** <b>Network</b> |
| + | *** Optimized mobile netifd script installation |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Shortened modem hang monitor timeout |
| + | *** Fixed VLAN option setting when changing VLAN ID |
| + | ** <b>Services</b> |
| + | *** Fixed RS485 not receiving data without transmiting prior |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.03.1_WEBUI.bin|TRB2_R_00.07.03.1]]</b> | 2023.01.03=== |
| + | |
| + | * <b>Improvements</b> |
| + | ** <b>System</b> |
| + | *** Remove front-end certificate validation |
| + | ** <b>Network</b> |
| + | *** Optimized mobile netifd script installation |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed modem communication validation |
| + | *** Fixed connection establishment in IPv6 only mode |
| + | ** <b>Services</b> |
| + | *** Fixed libxml2 vulnerability CVE-2022-40303 |
| + | *** Fixed an IPsec Phase one & two setting migration issue |
| + | *** Returned missing udp_client_count option to Over IP mode |
| + | *** Fixed operator index in DNP3 outstation; added GPS resubscribe; fixed segfault when GPS is enabled |
| + | ** <b>System</b> |
| + | *** Fixed JSON key parsing; keys can now be any printable character sequence |
| + | *** Fixed memory leak in 'session' module |
| + | ** <b>WebUI</b> |
| + | *** Fixed file pretty name parsing |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.03_WEBUI.bin|TRB2_R_00.07.03]]</b> | 2022.12.16=== |
| + | |
| + | * <b>New</b> |
| + | ** <b>Network</b> |
| + | *** Firewall DMZ page |
| + | ** <b>Services</b> |
| + | *** Java package |
| + | *** SFTP server support |
| + | *** OPC UA client |
| + | *** NTRIP |
| + | *** BACnet |
| + | *** Modbus Serial Slave |
| + | ** <b>System</b> |
| + | *** Portuguese language |
| + | *** Spanish language |
| + | *** Turkish language |
| + | *** Email Relay package |
| + | ** <b>WebUI</b> |
| + | *** New Web menu design |
| + | |
| + | * <b>Improvements</b> |
| + | ** <b>Network</b> |
| + | *** Updated modem handling, attachment, tracking and connection establishment processes |
| + | *** Added the possibility to select multiple ports in all firewall port fields |
| + | *** Added 'Match' traffic by type option to firewall traffic rules |
| + | *** Added DNS servers and routing table fields to the Wireguard page |
| + | *** Improved generating network topology |
| + | *** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section |
| + | *** Update Firewall Traffic Rules page with DSCP and MARK options |
| + | *** Added keepalive, holdtime and connect timers to BGP configuration |
| + | *** Added 'Use gateway metric' to network protocols web interface |
| + | *** Added more DHCPv6 client events to system log |
| + | *** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page |
| + | *** Added option to select subnet parameters in mobile Passthrough/Bridge modes |
| + | *** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database |
| + | *** Added mobile connection state for IPv6 |
| + | *** Added switch back to default SIM after SIM Switch service disable |
| + | *** Added wget tracking method to WAN Failover |
| + | *** Added interface checks to remove inaccurate Failover events from the Event Log |
| + | ** <b>Services</b> |
| + | *** Added the possibility to switch profiles on GPS geofencing events |
| + | *** Added satellite count and accuracy columns to GPS Map page |
| + | *** Added execute custom script SMS Utilities rule |
| + | *** Added receiver and transceiver mode support to SMPP |
| + | *** Added timezone synchronization with GSM operator option to NTP Client |
| + | *** Updated Zerotier web interface |
| + | *** Added IPsec Flush connection option on tunnel initialization |
| + | *** Added MODBUS slave regfile validation |
| + | *** Added delay, number of timeouts, always reconnect options to MODBUS Master service |
| + | *** Added DMVPN Phase 2 and Phase 3 support |
| + | *** Added synchronization counting to NTP client |
| + | *** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data |
| + | *** Added 'Unregister' button to RMS page |
| + | *** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs |
| + | *** Updated Zerotier package to version 1.10.1 |
| + | *** Added automatic package removal upon failed installation in Package Manager |
| + | *** Added option to describe custom routing table and MTU auto counting to Wireguard VPN |
| + | *** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks |
| + | *** Updated sqm-scripts to version 1.5.1 |
| + | *** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms |
| + | *** Added monthly reboot option to periodic reboot function |
| + | *** Added support for multiple custom option selection to SSTP configuration |
| + | *** Added PKCS12 certificate chain support to OpenVPN |
| + | *** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file |
| + | *** Added QoS selection to MQTT Modbus Gateway |
| + | *** Improved RAM usage during upload and installation of packages via Package Manager |
| + | *** Updated curl to version 7.86.0 |
| + | *** Added brute-force prevention measures to Post/Get |
| + | *** Added automatic private and public key generation to Wireguard VPN |
| + | *** Added multiple Remote source IP support to IPsec |
| + | *** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals |
| + | *** Added functionality to rotate log file when log is saved to Flash memory |
| + | *** Improved performance while fetching packages on repeat visits to the Package Manager page |
| + | *** Added custom value calculation to ADC and ACL pins |
| + | *** Added MODBUS TCP Slave registers to store Analog Current Loop value |
| + | ** <b>System</b> |
| + | *** Added a 'test mail' button to the Administration -> Recipients page |
| + | *** Added option to clear blocked IPs in the Access Control page after reboot |
| + | *** Updated Web Request-Response core logic |
| + | *** Added certificate validation to all services that support certificate upload |
| + | *** Updated URL protocol validations |
| + | *** Removed profile update requests during Save & apply |
| + | *** Optimized profile switching logic |
| + | ** <b>WebUI</b> |
| + | *** Added an indication to the Interfaces page that displays when data limit is enabled |
| + | *** Added bootloader version to the Device section in the System page |
| + | *** Added configuration page shortcuts to Overview page widgets |
| + | *** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover |
| + | *** Updated network interfaces protocols web interface |
| + | *** Updated 404 page to include navigation menu |
| + | |
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed jumbo frames MTU issue |
| + | *** Added the 'Any' choice to source & destination IP address field in NAT rule edit |
| + | *** Fixed NHRP web interface issues |
| + | *** Fixed WAN interface configuration interfering with LAN |
| + | *** Fixed mdcollect memory leak issue |
| + | *** Fixed data limit not resetting properly |
| + | *** Fixed incorrect mobile data usage calculations for multiple day periods |
| + | *** Fixed an Auto APN 'Keep settings' issue |
| + | *** Fixed data counting after mobile data limit has been reached |
| + | *** Fixed mobile band not setting correctly on first try |
| + | *** Fixed incorrect data limit conditions causing unwanted SIM switches |
| + | *** Fixed Passthrough DHCP lease time setting |
| + | *** Fixed mobile bridge mode issue when no DNS servers are supplied |
| + | *** Added new Operator Lists instance name validations |
| + | *** Fixed SIM Switch issue on newly created mobile interfaces |
| + | *** Fixed switch back to primary SIM rule disable when the default SIM is changed |
| + | *** Fixed incorrect SIM Switch behavior on low signal value |
| + | *** Fixed Wired WAN connectivity issue when Failover interfaces are disabled |
| + | *** Fixed Failover fallback issue |
| + | *** Fixed mobile passthrough mode for single ethernet port devices |
| + | ** <b>Services</b> |
| + | *** Corrected serial connection baud rates |
| + | *** Fixed hostname resolution in 'Over IP' serial type |
| + | *** Fixed RS232/RS485 starting issues |
| + | *** Fixed relay state switching |
| + | *** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler |
| + | *** Added I/O restart on configuration profile change |
| + | *** Fixed I/O voltage range display for power socket pins |
| + | *** Fixed SMNP OID for I/O state |
| + | *** Fixed I/O Juggler SMS text message Save & Apply issue |
| + | *** Fixed Delay field in GPS HTTPS/HTTP Server Settings section |
| + | *** Fixed AVL packet timestamp display |
| + | *** Fixed issue that prevented GPS map display after clearing cache |
| + | *** Removed unnecessary field from the Port Mirroring page |
| + | *** Fixed Events Reporting 'Changing to SIM1/SIM2' options |
| + | *** Fixed I/O analog voltage type display issue |
| + | *** Fixed UCI SMS Rule return message to display new changes |
| + | *** Fixed DNP3 issues when asking for modem temperature |
| + | *** Fixed base64 encoding of SMS messages when forwarding to HTTP |
| + | *** Fixed SMS sending issues when using multiple APN |
| + | *** Added Gateway modem option to IP Block and WoL in SMS Rule edit |
| + | *** Fixed unblocking IP addresses with an SMS message |
| + | *** Fixed Mobile Utilities page not load properly on some occasions |
| + | *** Fixed dbus vulnerability CVE-2020-35512 |
| + | *** Fixed dnsmasq vulnerability CVE-2022-0934 |
| + | *** Fixed ext4 vulnerability CVE-2021-3428 |
| + | *** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594 |
| + | *** Fixed libxm12 vulnerability CVE-2022-29824 |
| + | *** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4 |
| + | *** Fixed MQTT DoS vulnerability CVE-2021-41039 |
| + | *** Fixed privoxy vulnerability CVE-2021-44542 |
| + | *** Fixed python3 vulnerability CVE-2022-42919 |
| + | *** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079 |
| + | *** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790 |
| + | *** Fixed CVE-2023-32350 vulnerability |
| + | *** Fixed switching between RMS connection types while the device is unregistered |
| + | *** Fixed reload issues in website blocking feature |
| + | *** Fixed IPsec PSK secret required field validation |
| + | *** Fixed bandwidth limiting after QoS is enabled for the first time |
| + | *** Fixed Dropbear issues when logging in over IPv6 |
| + | *** Fixed Modbus status in Status -> Services page |
| + | *** Fixed Azure IoT Hub application issues when sending large volumes of data |
| + | *** Fixed Azure IoT Hub MQTT password validation |
| + | *** Fixed DMVPN configuration migration issue |
| + | *** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4 |
| + | *** Fixed DMVPN IPsec connection issue |
| + | *** Fixed DMVPN mobile interface 'Keep settings' migration issue |
| + | *** Fixed Dynamic DNS long hostname text display issue |
| + | *** Fixed Events Reporting memory leak issue |
| + | *** Fixed Events Reporting not triggering after flipping an I/O slider |
| + | *** Fixed FOTA cron job not starting after factory reset |
| + | *** Fixed IPsec local firewall option parsing |
| + | *** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore |
| + | *** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page |
| + | *** Fixed NTP pool hostname validation |
| + | *** Fixed OpenVPN certificate remove with Static key and TLS authentication methods |
| + | *** Fixed OpenVPN configuration saving issue when using HMAC key authentication |
| + | *** Fixed OpenVPN custom dev name transformation to correct format |
| + | *** Fixed OpenVPN device name setting logic when uploading config from file |
| + | *** Fixed OpenVPN instance status display |
| + | *** Fixed OpenVPN TAP (bridged) configuration detection |
| + | *** Fixed Qos configuration saving issue occurring after instance deletion |
| + | *** Fixed RMS JSON incorrect WAN state and IP information |
| + | *** Fixed RMS step access issue in the Setup Wizard page |
| + | *** Fixed SNMP issues after reboot while using a Hotspot |
| + | *** Fixed SNMP generating MIB files for devices in accordance with to their hardware |
| + | *** Fixed SNMP traps not working after SNMP is installed from server |
| + | *** Fixed SSTP client route creation issue |
| + | *** Fixed UPNP secure mode not turning off issue |
| + | *** Fixed Wireguard route to endpoint issue |
| + | *** Fixed manual package installation for queued packages |
| + | *** Fixed NAT Rules dependency from IPsec web instance |
| + | *** Returned usleep utility |
| + | *** Updated Australian and South African NordVPN server IP addresses |
| + | ** <b>System</b> |
| + | *** Fixed certificate signing issues |
| + | *** Fixed Telnet, CLI access blocking after max invalid tries |
| + | *** Fixed FW upgrade with 'Keep settings' while low free space is available |
| + | *** Fixed backup file duplication issue |
| + | *** Fixed network device handling in system |
| + | ** <b>WebUI</b> |
| + | *** Fixed side widget accessibility during first login |
| + | *** Fixed file upload issues |
| + | *** Fixed drag and drop issue in the Traffic Rules page |
| + | *** Fixed protocol display in the overview of the Interfaces page |
| + | *** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings' |
| + | *** Fixed login errors after browser tab restoration |
| + | *** Fixed redirect to newly set IP address after Interface configuration |
| + | *** Fixed firmware upgrade verify spinner not closing |
| + | *** Fixed an issue with file upload via drag and drop |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.7_WEBUI.bin|TRB2_R_00.07.02.7]]</b> | 2022.09.12=== |
| + | |
| + | * <b>Improvements:</b> |
| + | ** Improved manual-auto connection mode |
| + | |
| + | * <b>Fixes</b> |
| + | ** Fixed AT command for SMS storage usage |
| + | ** Fixed CVE-2022-1012 memory leak vulnerability |
| + | ** Fixed CVE-2022-37434 kernel vulnerability |
| + | ** Fixed GPS constellation settings |
| + | ** Removed memory leak on port events |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.6_WEBUI.bin|TRB2_R_00.07.02.6]]</b> | 2022.08.24=== |
| + | * <b>Improvements:</b> |
| + | ** Added 'home.vodafone.de' APN |
| + | ** Improved stability of device information storage |
| + | |
| + | * <b>Fixes:</b> |
| + | ** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode |
| + | ** Fixed VoLTE management |
| + | ** Fixed OpenVPN tls-auth and tls-crypt option names |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.5_WEBUI.bin|TRB2_R_00.07.02.5]]</b> | 2022.08.12=== |
| + | |
| + | * Improvements: |
| + | ** Updated curl to version 7.83.1 |
| + | ** Updated firmware validation error messages |
| + | ** Added multiple source IP address support to the Port Forwards page |
| + | ** Increased custom APN Username & Password field maximum length to 64 symbols |
| + | ** Added auto switch to modem's SMS storage when SIM card storage doesn't exist |
| + | ** Improved mobile connection status handling |
| + | |
| + | |
| + | * Fixes: |
| + | ** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities |
| + | ** Fixed CVE-2022-30065 busybox vulnerability |
| + | ** Fixed file upload path traversal |
| + | ** Removed Data to Server limit to proccess less than 10 instances |
| + | ** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data |
| + | ** Fixed OpenVPN dev setting logic |
| + | ** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work |
| + | ** Fixed MAC and leasetime setting for Bridge & Passthrough modes |
| + | ** Fixed band setting |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.4_WEBUI.bin|TRB2_R_00.07.02.4]]</b> | 2022.07.20=== |
| + | |
| + | * Improvements: |
| + | ** Added default password change warning message before firmware downgrade |
| + | ** Extended time period for device to make connection to operator |
| + | ** Reduced the number of modem reboots when changing mobile settings |
| + | ** Reduced excessive log output when no SIM card is inserted |
| + | ** Added modem restart prevention on modem init |
| + | ** Added disable RPLMN option in the SIM section of the SIM card config |
| + | |
| + | * Fixes: |
| + | ** Fixed CVE-2022-2068 vulnerability |
| + | ** Disabled autoconnect on stop-network call |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.2_WEBUI.bin|TRB2_R_00.07.02.2]]</b> | 2022.06.27=== |
| + | |
| + | * Improvements: |
| + | ** Updated FSTools package to version 2022-05-03 |
| + | ** Added security headers to web requests |
| + | ** Added ping to DNS IPv6 support |
| + | ** Added modem reset to default state after device FW upgrade |
| + | ** Modem init now checks NVRAM sensitive commands before setting |
| + | ** GSM output was made consistent |
| + | |
| + | * Fixes: |
| + | ** Fixed CVE-2019-12900 libbz2 vulnerability |
| + | ** Fixed CVE-2022-23303 hostapd vulnerability |
| + | ** Fixed CVE-2022-29581 Linux kernel vulnerability |
| + | ** Fixed CVE-2022-29458 ncurses vulnerability |
| + | ** Fixed CVE-2022-1292 c_rehash script command injection vulnerability |
| + | ** Fixed behavior of some gsmctl commands |
| + | ** Fixed band locking issue |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02.1_WEBUI.bin|TRB2_R_00.07.02.1]]</b> | 2022.06.06=== |
| + | |
| + | * Improvements: |
| + | ** Improved GSM related messages in Troubleshoot logs |
| + | |
| + | * Fixes: |
| + | ** Fixed IGMP Proxy menu item not appearing after package installation |
| + | ** Fixed default mobile network configuration generation |
| + | ** Fixed MODBUS write requests and Mobile Utils option setting |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.02_WEBUI.bin|TRB2_R_00.07.02]]</b> | 2022.05.23=== |
| + | |
| + | * <b>New features</b> |
| + | ** Overview side widget |
| + | ** IGMP Proxy |
| + | ** Privileged Access Management (PAM) |
| + | ** AWS Greengrass support |
| + | ** HTTPS certificate and key upload feature |
| + | ** SSH public keys edit box |
| + | ** License page |
| + | ** WAN Failover |
| + | ** DNP3 data for Data to Server |
| + | |
| + | * <b>Improvements</b> |
| + | ** Updated busybox to version: 1.34.1 |
| + | ** Updated curl to version 7.79.1 |
| + | ** Added iptables filter package for string filtering |
| + | ** Added CHAP authentication for L2TP VPN |
| + | ** Added IPv6 support for L2TPv3 VPN |
| + | ** Added EAP-MSCHAPV2 authentication method for IPsec VPN |
| + | ** Added IPv6 support to Auto Reboot |
| + | ** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page |
| + | ** Updated SNMP version 5.9.1 |
| + | ** Added OpenSSL authentication options to SNMPv3 |
| + | ** Added support for OSPF redistribution options and OSPF neighbors |
| + | ** Added password field to BGP Peers page |
| + | ** Extended BGP "AS" field validation to accept integers up to 4294967295 |
| + | ** Added "DHE+RSA" to OpenVPN cipher selections |
| + | ** Increased OpenVPN max password length from 128 bytes to 512 bytes |
| + | ** Made HMAC key direction initial value dependent on the role of the instance (client or server) |
| + | ** Made HMAC key and HMAC authentication key upload fields required |
| + | ** Added DES to IPsec encryption algorithms selections |
| + | ** Added special character support for CHAP secrets |
| + | ** Added validation requirements for PPTP user list username field |
| + | ** Added option to manually enter Public key in Wireguard configuration |
| + | ** Made generating Wireguard keys possible only while in auto mode |
| + | ** Added Events Log database to troubleshoot archive |
| + | ** Added RFC1918 filter field |
| + | ** Added the possibility to unblock multiple blocked devices at once |
| + | ** Added 'Port' column to blocked login attempts table |
| + | ** Added Speedtest server refresh |
| + | ** Updated Speedtest server list |
| + | ** Added asterisk option to Site Blocking |
| + | ** Added MD5 and SHA256 checksums to package validation page |
| + | ** Changed certificate requirements to only require client key file if client certificate is used |
| + | ** Added pagination and data retention between table pages |
| + | ** Added pagination functionality to tables when there are more than 10 records |
| + | ** Improved table sorting by saving user provided sort settings in the browser |
| + | ** Improved drag and drop functionality |
| + | ** Added the possibility to drag and drop files onto upload components |
| + | ** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page |
| + | ** Added 'Strict-Transport-Security' response header for HTTPS |
| + | ** Added 'breadcrumbs' to modal windows |
| + | ** Improved initial WebUI loading after login |
| + | ** Added mobile bytes sent and bytes received SNMP OIDs |
| + | ** Added mobile LED turn off feature ('System -> Administration' page) |
| + | ** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database |
| + | ** Updated mobile usage data point calculation logic |
| + | ** Added the possibility to manually enter operator number |
| + | ** Improved obtain mobile cell ID process |
| + | ** Added modem restart if SIM card is removed during APN database fetching process |
| + | ** Added unauthorized call logging |
| + | ** Added space character support in SMS commands |
| + | ** Disabled SMS modem storage configuration form when SIM is not inserted |
| + | ** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired) |
| + | ** Added external modem SMS limit Overview card and widget |
| + | ** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button) |
| + | ** Added duplicate value check for list configuration options |
| + | ** Changed mobile card instance design |
| + | ** Fixed 'Mobile Data usage reset' SMS rule |
| + | ** Fixed the default state parameter of SMS list POST/GET command |
| + | ** Added AVL "Static Navigation" flag |
| + | ** Added GSV parsing for NMEA collecting |
| + | ** Added newline and GPS location actions to I/O Juggler |
| + | ** Added I/O SNMP trap |
| + | ** Added ISO 8601 time format to I/O Juggler's '%ts' parameter |
| + | ** Added device name parameter '%pc' to I/O Juggler |
| + | ** Added ACL or ADC SNMP trap notification on enter/exit/both |
| + | ** Added ACL MQTT topic |
| + | ** Added PPPoE VLAN priority support |
| + | ** Made VRRP ping section dependent on main instance |
| + | ** Added CRC verification support to MODBUS and RS232/RS485 |
| + | |
| + | * <b>Fixes</b> |
| + | ** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities |
| + | ** Fixed CVE-2022-28391 busybox vulnerability |
| + | ** Fixed CVE-2018-16789 shellinabox vulnerability |
| + | ** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities |
| + | ** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability |
| + | ** Fixed zlib backport security issue |
| + | ** Fixed Wireguard firewall zone assignment |
| + | ** Fixed queued packages disappearing from list after FW upgrade with keep settings |
| + | ** Fixed error message display for multiple input validation rules |
| + | ** Fixed incorrect DHCP validation range for start and limit fields |
| + | ** Removed 'Bring up on boot' option from network interface configuration pages |
| + | ** Fixed coma-separated DHCP options disappearing after save |
| + | ** Fixed exclude and listen interfaces |
| + | ** Fixed 'Use broadcast flag' option saving |
| + | ** Fixed firewall zone assignment when creating new interfaces |
| + | ** Fixed OpenVPN 'Netmask' and 'IP address' field validations |
| + | ** Fixed OpenVPN TAP configuration saving issue |
| + | ** Fixed OpenVPN switching to TUN mode when uploading a configuration from file |
| + | ** Fixed dynamic BGP route state display |
| + | ** Fixed BGP peer enable in edit page |
| + | ** Fixed issue when no L2TP client instance could be bound to IPsec |
| + | ** Fixed firewall rule and zone behavior related to config section creation |
| + | ** Added default value for L2TPv3 netmask, which is now written to config after save |
| + | ** Fixed passthrough option saving to IPsec file |
| + | ** Fixed DMVPN issue where instance configuration could not be saved |
| + | ** Fixed Wireguard peer could not be saved issue |
| + | ** Fixed NTP client time synchronization after factory reset |
| + | ** Fixed device time display with selected time zone |
| + | ** Fixed MODBUS TCP indexation missing bracket issue |
| + | ** Fixed initial MODBUS TCP request count validation |
| + | ** Fixed PIN 3/4 direction switching over MODBUS TCP |
| + | ** Fixed MODBUS data to MQTT socket closing issue when connection fails |
| + | ** Fixed MODBUS alarm configuration deletion |
| + | ** Fixed DNP3 master not working after FW upgrade with 'keep settings' |
| + | ** Fixed DNP outstation not returning error messages |
| + | ** Added missing SNMP objects: mobile IP, data sent/received today |
| + | ** Fixed MQTT Publisher 'Remote address' field validation |
| + | ** Fixed long interface name support for Azure IoT Hub |
| + | ** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters |
| + | ** Fixed missing sent/received data issue |
| + | ** Fixed URL input field length validation |
| + | ** Fixed admin login issue after upload of backup from a device with older firmware versions |
| + | ** Fixed MAC address formatting in Events reporting messages |
| + | ** Fixed Events reporting DHCP lease message spam, when no new lease is added |
| + | ** Fixed logging crashing after downloading Troubleshoot file |
| + | ** Made Wake on LAN visible only on devices with Ethernet ports |
| + | ** Fixed Traffic log file transfer to FTP server |
| + | ** Fixed Web Filter service reloading after a host list file is uploaded |
| + | ** Fixed access denied messages when sending JSON-RPC requests from root user |
| + | ** Fixed error message display about duplicated intervals in Profile scheduler |
| + | ** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields |
| + | ** Corrected OSPF Routing card values, value positions and names |
| + | ** Fixed global secret instances not being removed when there are no IPsec instances |
| + | ** Fixed uploaded file remove icon not staying in position on hover |
| + | ** Fixed Overview card collapse issue that made it unresponsive after too many clicks |
| + | ** Removed WAN6 interface from the Overview page |
| + | ** Fixed mobile IPv6 display in Events Reporting status messages |
| + | ** Fixed Bridge mode when DNS2 is not available |
| + | ** Fixed PAP/CHAP username and password fields not saving in interface edit window |
| + | ** Fixed sending email without secure connection for providers that support such an option |
| + | ** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message |
| + | ** Fixed Call Utilities Events Log message for reboot rule |
| + | ** Fixed SMS command validation for no-authorization option |
| + | ** Fixed MODBUS SMS alarms 'Enable' option saving |
| + | ** Fixed running RMS with no SIM card inserted issue |
| + | ** Fixed firmware available on server version checking issue |
| + | ** Fixed CVE-2020-15078 openvpn vulnerability |
| + | ** Fixed storage calculation for packages |
| + | ** SMS Utilities: enhanced service security |
| + | ** Fixed firmware deletion after leaving the page |
| + | ** Fixed setup wizard redirect after LAN IP change |
| + | ** Fixed various validation bugs, typos, option hints & alignments |
| + | ** Fixed multiple IPv6 configuration field validations |
| + | ** Fixed unnecessary SIM switch issue when Multi-APN is configured |
| + | ** Fixed MODBUS TCP slave modem not starting after switching SIM cards |
| + | ** Fixed restoring GPS HTTPS options after FW upgrade with 'keep settings' |
| + | ** Fixed missing NMEA sentences |
| + | ** Fixed NMEA cache sentence calculation |
| + | ** Fixed 'outside/inside range' condition for AVL I/O Analog input trigger |
| + | ** Fixed relay output value display in I/O Juggler condition page |
| + | ** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces |
| + | ** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances |
| + | ** Fixed I/O Juggler's incorrect I/O status messages |
| + | ** Fixed automatic port open after RS232/RS485 Over IP server & bidirect configuration changes |
| + | ** Fixed 'iostatus' SMS rule |
| + | ** Added multiwan support for Wireguard default route |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.01.4_WEBUI.bin|TRB2_R_00.07.01.4]]</b> | 2022.02.25=== |
| + | |
| + | * <b>Improvements</b> |
| + | ** Increased Port Forwards rule max name length |
| + | ** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler |
| + | ** Improved RS232 Port and Timeout validation |
| + | |
| + | * <b>Fixes</b> |
| + | ** Added missing bracket to the end of MODBUS messages |
| + | ** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option |
| + | ** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page |
| + | ** Fixed firewall extra option validation |
| + | ** Fixed usage of custom headers in I/O Juggler HTTP action |
| + | ** Fixed 'verify' option parsing for I/O Juggler |
| + | ** Changed the logic of uploading files to the modem |
| + | ** Fixed OpenVPN server configuration with password authentication |
| + | ** Fixed NTP interval length validation |
| + | ** Fixed network interface enable after Drag & Drop |
| + | ** Updated NTP client interval to 24h |
| + | ** Fixed connection to whitelist carriers |
| + | ** Fixed Passthrough mode when DHCP is disabled |
| + | ** Fixed 'Deny data roaming' feature |
| + | ** Fixed mobile blocking dependency on region |
| + | ** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled |
| + | |
| + | ===<b>[[Media:TRB2_R_00.07.01.2_WEBUI.bin|TRB2_R_00.07.01.2]]</b> | 2022.01.04=== |
| + | |
| + | * <b>New features</b> |
| + | ** DFOTA modem upgrade system for Quectel modems |
| + | |
| + | * <b>Improvements</b> |
| + | ** Removed L2TP section title prefixes |
| + | |
| + | * <b>Fixes</b> |
| + | ** Fixed IPSec crashing issue using mobile |
| + | ** Fixed FW flashing when chip is in unknown state |
| + | ** Fixed CPU usage percentage display in the Overview page |
| + | ** Fixed FOTA timeout issue when server does not respond |
| + | ** Fixed installation of backup packages |
| + | ** Fixed mobile data limit display after profile change |
| + | ** Fixed Bridge mode without multi-APN |
| + | ** Fixed multi mobile interface checking |
| + | ** Fixed error handling when the modem is not responding |
| + | ** Prolonged autoconnect setting timeout |
| + | |
| + | ===<b>TRB2_R_00.07.01</b> | 2021.11.18=== |
| + | <b>Note:</b> Firmware version TRB2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection. |
| + | ---- |
| + | * <b>New features</b> |
| + | ** Tinc VPN |
| + | ** German language support |
| + | ** Manual-Auto operator select |
| + | |
| + | * <b>Improvements</b> |
| + | ** Improved WebUI functionality when multiple browser tabs are open |
| + | ** Updated base to OpenWrt version 21.02 |
| + | ** Updated kernel to version 5.4.141 |
| + | ** Updated mtd-utils to version 2.1.2 |
| + | ** Updated busybox to version 1.33.1 |
| + | ** Updated ubus to version 2021-06-3 |
| + | ** Updated ubox to version 2020-10-25 |
| + | ** Updated rpcd to version 2021-03-11 |
| + | ** Updated opkg to version 2021-06-13 |
| + | ** Updated fstools to version 2021-01-04 |
| + | ** Updated wwan to version 2019-04-29 |
| + | ** Updated ethtool to version 5.10 |
| + | ** Updated uhttpd to version 2021-03-21 |
| + | ** Updated ppp to version 2020-10-03 |
| + | ** Updated odhcpd to version 2021-07-18 |
| + | ** Updated hostapd to version 2020-06-08 |
| + | ** Updated dropbear to version 2020.81 |
| + | ** Updated dnsmasq to version 2.85 |
| + | ** Updated netifd to version 2021-07-26 |
| + | ** Updated firewall3 to version 2021-03-23 |
| + | ** Updated libjson-c to version 0.15 |
| + | ** Updated libevent2 to version 2.1.12 |
| + | ** Updated mac80211 to version 5.10.42-1 |
| + | ** Updated wireless-regdb to version 2021.04.21 |
| + | ** Updated binutils to version 2.35.1 |
| + | ** Updated gdb to version 10.1 |
| + | ** Updated strace to version 5.10 |
| + | ** Updated trace-cmd to version 2.9.1 |
| + | ** Updated valgrind to version 3.16.1 |
| + | ** Updated ath10k-ct-firmware to version 2020-11-08 |
| + | ** Updated procd to version 2021-02-23 |
| + | ** Updated iw to version 5.9.8 |
| + | ** Updated iproute2 to version 5.11.0 |
| + | ** Updated iptables to version 1.8.7 |
| + | ** Updated nettle to version 3.6 |
| + | ** Updated libpcap to version 1.9.1 rel3 |
| + | ** Updated elfutils to version 0.180 |
| + | ** Updated cryptodev-linux to version 1.11 |
| + | ** Updated linux-firmware to version 20201118 |
| + | ** Updated util-linux to version 2.36.1 |
| + | ** Updated openwrt-keyring to version 2021-02-20 |
| + | ** Updated mtd to version rel26 |
| + | ** Updated fwtool to version 2019-11-12 |
| + | ** Updated ca-certificates to version 20210119 |
| + | ** Updated wireguard-tools to version 1.0.20210223 |
| + | ** Updated iwinfo to version 2021-04-30 |
| + | ** Updated ipset to version 7.6 |
| + | ** Updated gre to version rel12 |
| + | ** Updated wolfssl to version 4.7.0 |
| + | ** Updated ustream-ssl to version 2020-12-10 |
| + | ** Updated uclient to version 2021-05-14 |
| + | ** Updated readline to version 8.1 |
| + | ** Updated mbedtls to version 2.16.11 |
| + | ** Updated libusb to version 1.0.24 |
| + | ** Updated libunwind to version 1.5.0 |
| + | ** Updated libubox to version 2021-05-16 |
| + | ** Updated libnl-tiny to version 2020-08-05 |
| + | ** Updated libnftnl to version 1.1.8 |
| + | ** Updated libiconf-full to version 1.16 |
| + | ** Updated libbsd to version 0.10.0 |
| + | ** Updated gmp to version 6.2.1 |
| + | ** Updated ulogd to version rel6 |
| + | ** Updated sqm-scripts to version 1.5.0 |
| + | ** Updated ntpclient to version rel14 |
| + | ** Updated nmap to version 7.80 |
| + | ** Updated curl to version 7.77.0 |
| + | ** Updated zerotier to version 1.6.5 |
| + | ** Updated xtables-addons to version 3.13 |
| + | ** Updated xl2tpd to version 1.3.16 |
| + | ** Updated stunnel to version 5.59 |
| + | ** Updated strongswan to version 1.0.13 |
| + | ** Updated sstp-client to version 1.0.13 |
| + | ** Updated pptpd to version rel5 |
| + | ** Updated openvpn to version 2.5.3 rel2 |
| + | ** Updated ntpd to version rel3 |
| + | ** Updated net-snmp to version rel2 |
| + | ** Updated mosquitto to version 2.0.11 |
| + | ** Updated miniupnpd to version 2.2.1 rel 3 |
| + | ** Updated etherwake to version rel5 |
| + | ** Updated libzip to version 1.7.3 |
| + | ** Updated libgpg-error to version 1.39 |
| + | ** Updated glib2 to version 2.66.4 |
| + | ** Updated libnetfilter-conntrack to version 1.0.8 |
| + | ** Updated libnetfilter-log to version rel3 |
| + | ** Updated lzo to version rel4 |
| + | ** Updated nghttp2 to version 1.43.0 |
| + | ** Updated openvpn-easy-rsa to version 3.0.8 rel3 |
| + | ** Updated iperf to version rel2 |
| + | ** Updated iperf3 to version 3.10.1 |
| + | ** Updated e2fsprogs to version 1.45.6 |
| + | ** Updated fuse to version 2.9.9 |
| + | ** Updated udprelay to version 2020-02-26 |
| + | ** Updated qmicli to version 1.28.2 |
| + | ** Updated pcre to version 8.45 |
| + | ** Updated libsmpp34 to version 1.14.1 |
| + | ** Updated libiwinfo to version 2.1 |
| + | ** Added netifd library for additional information related to network interfaces |
| + | ** Updated openssl to version 1.1.1l |
| + | ** Updated privoxy to version 3.0.32 |
| + | ** Added ACL reload method for sessions |
| + | ** Added 'Advertisement interval' field to the VRRP configuration window |
| + | ** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client |
| + | ** Added email user group validation for sendind test emails with Events reporting |
| + | ** Added an event logging feature for Ping Reboot events |
| + | ** Improved file/section deletion logic: now files are also deleted after deleting a related config section |
| + | ** Improved package deletion logic |
| + | ** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance |
| + | ** Updated 'External system log server' field validation to accept IPv6 addresses |
| + | ** Added redirect to Overview page after login |
| + | ** Added WebUI session timeout after user inactivity |
| + | ** Added placeholder text to dropdown menus |
| + | ** Improved multi-select design and functionality |
| + | ** Added Unix timestamp, local ISO time, UTC time to Modbus |
| + | ** Added info message when selected file cannot be uploaded |
| + | ** Improved IPsec throughtput |
| + | ** Added IPSec "Compatibility mode" configuration support |
| + | ** Made SNMP 'Community name' option editable |
| + | ** Added the option to delete configurations to the SMS Utilities 'UCI' rule |
| + | ** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration |
| + | ** Added Lithuanian and Verizon APNs |
| + | ** Added modem selection for the 'Send SMS' option in Auto Reboot settings |
| + | ** Added the possibility to get total data usage value without specifying time interval via ubus |
| + | ** Added return SIM count command |
| + | ** Added an indication to the GPS map when GPS service is disabled |
| + | ** Added I/O support to SNMP |
| + | ** Removed ubus list method due to security reasons |
| + | ** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender |
| + | ** Removed search engine site crawling |
| + | ** Improved IPSec "Local/Remote source" validation |
| + | ** Added Firewall "all" and "custom" protocol options |
| + | ** Added Backup file size limit of 2 MB |
| + | ** Improved basic/advanced mode changing |
| + | ** Improved Wireguard "IP Addresses" field validation |
| + | ** Added language download support from language selection section |
| + | ** Added PPTP "Client to client" configuration support |
| + | ** Made DDNS "username", "password", "host" fields optional |
| + | ** Added SSTP "Default route" configuration support |
| + | ** Added SMS Limit hour, week day and month day support |
| + | ** Added Passthrough "Leasetime" and "Unit" configuration support |
| + | ** Added Call Utilities "Active Timeout" configuration support |
| + | ** Added support for PL2303GC serial to USB chip |
| + | ** Added GPS AVL "Don't Contain Connection" and "Retry on Fail" configuration support |
| + | |
| + | * <b>Fixes</b> |
| + | ** Made RMS 'Connect' button disabled when a connection attempt is already in progress |
| + | ** Added validation for TLS Clients 'Private network' option |
| + | ** Fixed the validation range for MTU fields |
| + | ** Fixed removing firmware image file after leaving the fimware upgrade page |
| + | ** Fixed network selection list for Traffic Logging - added all available LAN networks |
| + | ** Fixed DHCP Options validation |
| + | ** Fixed configuration profile date display |
| + | ** Fixed blank page after invalid URL in login page |
| + | ** Fixed TR-069 related firewall rule loading |
| + | ** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration |
| + | ** Fixed WebUI section toggle |
| + | ** Fixed package installation modal layout |
| + | ** Fixed current page values showing up in login page username field |
| + | ** Fixed the possibility to create section with a name that is already in use in the same config file |
| + | ** Fixed OpenVPN username and password deletion when deleting configuration instance |
| + | ** Fixed session closing issue for the user whose password was just changed |
| + | ** Updated MODBUS credential validation |
| + | ** Updated MQTT credential validation |
| + | ** Fixed DNS 'Rebind protection' setting when switch is disabled |
| + | ** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560 |
| + | ** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities |
| + | ** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page |
| + | ** Fixed Reboot Scheduler not removing crontab file after disabling the rule |
| + | ** Fixed OpenVPN 'Extra options' field validation to allow a space character |
| + | ** Added table drag and drop functionality to the Firewall's Traffic Rules page |
| + | ** Fixed DNP3 Outstation crash caused by non-void function returning no value |
| + | ** Fixed RMS 'Copy' button functionality |
| + | ** Fixed gsmd deamon crashing after modem restart |
| + | ** Fixed gsm memory leak |
| + | ** Fixed WCDMA band names for MEIG modules |
| + | ** Fixed SMS Gateway loading screen issue when sending an SMS message |
| + | ** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option |
| + | ** Fixed rpcd memory leak issue |
| + | ** Fixed network information gathering |
| + | ** Fixed 3G LED not being active in 3G mode |
| + | ** Fixed data limit accuracy issue |
| + | ** Fixed SIM Switch back to default SIM crash loop when SIM1 is disabled |
| + | ** Removed unused SIM Switch struct objects |
| + | ** Fixed NTP GPS Synchronization swith to enable GPS service |
| + | ** Fixed MODBUS Serial Master crash when requesting a 4-byte datatype from a 2-byte data payload |
| + | ** Added a check if DNP3 is installed for 'Serial type' option |
| + | ** Fixed SMS Utilities not working |
| + | ** Fixed I/O Juggler hour condition interval issue |
| + | ** Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page |
| + | ** Patched CVE-2021-40528 vulnerability |
| + | ** Patched CVE-2021-40490 vulnerability |
| + | ** Patched CVE-2020-16120 vulnerability |
| + | ** Fixed VLAN section creation |
| + | ** Returned Interfaces "Port priority" option |
| + | ** Fixed missing Content-Type header to initial WebUI response |
| + | ** Fixed RIP information parsing in status page |
| + | ** Fixed OpenVPN IPv6 netmask validation |
| + | ** Fixed SNMP Trap Settings Host/IP field validation |
| + | ** Fixed Cumulocity authentication reset |
| + | ** Fixed Events Reporting rule saving |
| | | |
| ===<b>[[Media:TRB2_R_00.07.00_WEBUI.bin|TRB2_R_00.07.00]]</b> | 2021.07.16=== | | ===<b>[[Media:TRB2_R_00.07.00_WEBUI.bin|TRB2_R_00.07.00]]</b> | 2021.07.16=== |